OEX Alternator 12V 125A Mitsubishi Style MXA2062

The OEX Alternator MXA2062 is a 12V, 125A alternator in Mitsubishi style, supplied new and listed as a twin leg unit with an internal regulator. It suits Mitsubishi applications and uses a pulley with an outside diameter of 73mm and AA pulley section, so those dimensions should be checked against the original unit before purchase.

As a rotating electrical component, alternator matching is not only about the vehicle make. This unit has an inside mounting leg width of 60mm, mount centre to centre of 175mm, pivot hole diameter of 12.5mm and an M8x1.25 adjusting hole, which are all practical checks when confirming whether it will physically fit the bracketry on the vehicle.

OEX positions this alternator range around quality and reliability at an aftermarket price, with ISO9001 certified factories and a comprehensive warranty. For buyers comparing replacement charging components, the key identifiers here are 12V, 125A, part number MXA2062, pin code IR49 and Mitsubishi-style construction.

Key Features

• 12V alternator rated at 125A
• New unit, not remanufactured
• Internal regulator type
• Twin leg alternator mount
• 73mm pulley outside diameter
• AA pulley section

Specifications

• Brand: OEX
• Product type: Alternator
• Part No.: MXA2062
• Voltage: 12V
• Power rating: 125A
• Unit of measure: Each
• New / Reman.: New
• Regulator type: Internal

Verified application guidance

• Suits unit make: Mitsubishi
• Fitment references include Mitsubishi Fuso Canter and Mitsubishi Canter applications
• Fitment references also include Mitsubishi Pajero, Mitsubishi Starwagon and Mitsubishi Triton
• Fitment data provided includes FE6 and FE8 references across multiple model years
• Additional fitment references shown include FE7 and FB8

Application and Buying Notes

Before ordering, match the part number MXA2062 and compare the mounting layout to the vehicle’s original alternator. The most important physical checks here are the twin leg mount, 60mm inside mounting legs, 175mm mount centre to centre, 12.5mm pivot hole and M8x1.25 adjusting hole.

The charging specification is 12V at 125A, so the replacement should be selected with the vehicle’s electrical system and accessory load in mind. A 73mm pulley outside diameter, AA pulley section and 17mm shaft dimension are also important because pulley and shaft differences can prevent a direct swap even when the alternator is otherwise close.

This alternator is listed for Mitsubishi applications, with fitment references including Mitsubishi Fuso Canter, Mitsubishi Canter, Pajero, Starwagon and Triton, plus FE6, FE7, FE8 and FB8 references. Use those references as a guide only and confirm them against the vehicle, because alternator fitment can vary within the same model family.

If replacing an existing alternator, compare the old unit’s regulator type, mounting ears, pulley style and electrical connections. The pin code listed is IR49, which may help when matching connector layout, but the safest check is always the full physical and application match before installation.

For commercial vehicles in particular, the warranty differs by use: 3 years for passenger applications and 1 year for commercial applications. Keep proof of purchase and confirm the vehicle use category before relying on that coverage.

At 6.06kg, this is a substantial rotating electrical component and should be handled and installed carefully. Confirm belt alignment, bracket condition and cable connections during fitting so the new alternator is not compromised by pre-existing wear in the charging system.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number MXA2062 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Inside Mounting Legs 60mm, Pivot Hole Diameter 12.5, Pulley Outside Diameter 73mm, Regulator Type Internal, Voltage 12, Mount Cnt to Cnt 175mm, Shaft Dimension 17.

Additional published details for cross-checking include Product Group 2 ALTERNATORS, Part No. MXA2062, Brand OEX, Description OEX Alternator 12V 125A Mitsubishi Style, Adjusting Hole Diameter M8x1.25, Pin Code IR49, Power Rating (Amp) 125, Pulley Section AA, Suits Unit Make Mitsubishi.

OEX Alternator 12V 125A Mitsubishi Style. Part number MXA2062 should be checked first. Listed voltage is 12. Listed output rating is 125. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Twin Leg. Regulator type is Internal. Pulley configuration is AA. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number MXA2062, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 125 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Confirm fitment by matching part number MXA2062, Mitsubishi application details and the listed mounting, pulley and connector specifications before purchase. If the existing alternator does not match on mount type, 12V/125A rating, pulley dimensions or regulator style, do not assume it will fit.

FAQ

What is the part number for this alternator?

The part number is MXA2062.

What voltage and output does it have?

It is a 12V alternator rated at 125A.

Is this alternator new or remanufactured?

It is listed as new.

What type of regulator does it use?

It has an internal regulator.

What mounting and pulley details are listed?

It has a twin leg alternator mount, 60mm inside mounting legs, 175mm mount centre to centre, 12.5mm pivot hole, M8x1.25 adjusting hole, 73mm pulley outside diameter and AA pulley section.

What warranty is listed?

The listed warranty is 3 years for passenger applications and 1 year for commercial applications.