Cole Hersee Push Button Switch On/off Norm On 12/24V 16MM 9115BL

The Cole Hersee Push Button Switch is a 2-position, non-illuminated switch with an On - Mom Off - SPST action. It is listed for 12 or 24 volt applications and has a 16mm mount diameter with a 20mm mount length, which makes those dimensions important when checking panel compatibility before purchase.

This switch is identified by part number 9115BL and is a single pole, 2-terminal unit sold as each. The power rating is not applicable, so selection should be based on the switch action, voltage, mounting size, and terminal count rather than an amp rating.

For buyers comparing replacement controls, the key practical points are the push-button operation, normal-on behaviour, and the non-illuminated design. The switch sits within the Auto Elec Accessories and Fuses Breakers Relays Switches product groups, which places it in the general vehicle electrical control category.

A one-year warranty is listed. As with any panel-mounted switch, correct fit depends on matching the mounting hole size, mount length, terminal layout, and the intended electrical function rather than relying on appearance alone.

Key Features

• Push button switch with On - Mom Off - SPST action
• 12 or 24 volt application
• 16mm mount diameter
• 20mm mount length
• 2 terminals
• Single pole, 2-position design

Specifications

• Brand: Cole Hersee
• Product type: Switch
• Unit of measure: Each
• Voltage: 12 or 24
• Mount diameter: 16mm
• Mount length: 20mm
• Number of poles: 1
• Number of terminals: 2

Application and Buying Notes

Before ordering, confirm the panel opening is suitable for the 16mm mount diameter and that there is enough room for the 20mm mount length behind the panel. Those two measurements are the main physical checkpoints for this switch and can save time during installation.

Electrical compatibility should also be checked against the vehicle or equipment circuit. This switch is listed for 12 or 24 volt use, has 2 terminals, and uses an On - Mom Off - SPST action, so it is intended for a simple single-pole control function rather than a more complex switching arrangement.

Because the power rating is marked as not applicable, the better way to assess suitability is by matching the existing switch function, terminal count, and mounting size. If you are replacing an old switch, comparing the part number 9115BL or matching the same switch action is the most reliable approach.

The switch is non-illuminated and has no lamp colour specification, so it suits applications where no backlighting is required. If your original switch is lit, has more than 2 terminals, or uses a different switching style, this unit may not be the correct replacement even if the mounting hole looks close.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number 9115BL helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type SWITCH, Unit of Measure EACH, Warranty One Year, Power Rating (Amp) Not Applicable, Voltage 12 or 24, Mount Diameter 16mm, Number of Poles 1, Switch Type Push, Product Group 1 AUTO ELEC ACCESSORIES, Part No. 9115BL.

Additional published details for cross-checking include Brand COLE HERSEE, Description Cole Hersee Push Button Switch On/Off Norm On, Number of Terminals 2, Switch Action On - Mom Off - SPST, Lamp Colour/s Not Applicable, Mount Length 20mm, Number of Positions 2, Switch Illumination Non Illuminated, Product Group 2 FUSES BREAKERS RELAYS SWITCHES.

Cole Hersee Push Button Switch On/Off Norm On. Part number 9115BL should be checked first. Listed voltage is 12 or 24. Listed output rating is Not Applicable. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number 9115BL, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a switch in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 or 24 and output Not Applicable should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Where no verified application list is available, the part number, mounting details, connector style, and published specifications should be used as the primary selection criteria.

Compatibility note: Please confirm fitment using part number 9115BL, the 16mm mount diameter, 20mm mount length, 2-terminal layout, and the required On - Mom Off - SPST switching function before ordering.

FAQ

What is the part number for this Cole Hersee push button switch?

The listed part number is 9115BL. For this listing, part number 9115BL is the main reference point. Listed voltage is 12 or 24. Listed output rating is Not Applicable. These details should still be checked against the original unit before ordering.

Is this switch suitable for 12 volt and 24 volt systems?

Yes. The listed voltage is 12 or 24. For this listing, part number 9115BL is the main reference point. Listed voltage is 12 or 24. Listed output rating is Not Applicable. These details should still be checked against the original unit before ordering.

How many terminals does the switch have?

It has 2 terminals. For this listing, part number 9115BL is the main reference point. Listed voltage is 12 or 24. Listed output rating is Not Applicable. These details should still be checked against the original unit before ordering.

What mounting size does it require?

The listed mount diameter is 16mm and the mount length is 20mm. For this listing, part number 9115BL is the main reference point. Listed voltage is 12 or 24. Listed output rating is Not Applicable. These details should still be checked against the original unit before ordering.

Is the switch illuminated?

No. It is listed as non illuminated. For this listing, part number 9115BL is the main reference point. Listed voltage is 12 or 24. Listed output rating is Not Applicable. These details should still be checked against the original unit before ordering.

What switching action does it use?

The switch action is listed as On - Mom Off - SPST, with 2 positions and 1 pole. For this listing, part number 9115BL is the main reference point. Listed voltage is 12 or 24. Listed output rating is Not Applicable. These details should still be checked against the original unit before ordering.