Cole Hersee Push/pull Switch Off/on Spst 10A 12V Part No. M606BX

The Cole Hersee Push/Pull Switch is an Off/On SPST switch with a single pole and two positions, rated at 10A @ 12V. It is listed under part number M606BX and is supplied as a non-illuminated switch for auto electrical applications where a simple manual on/off control is required.

The switch features a brass, plasticised construction with pre-wired, sealed contacts. That combination suits buyers looking for a straightforward electrical switch with basic protection around the contacts and a tidy wiring start point, rather than an illuminated or multi-function control.

Physical details supplied for this unit include a 22mm mount length and 32mm mount diameter. Those measurements matter when checking panel space, hole size, and the available depth behind the mounting surface before ordering.

Key Features

• Push/pull switch action
• Off / On SPST operation
• Single pole, 2 positions
• 10A @ 12V power rating
• Brass, plasticised construction
• Pre-wired, sealed contacts

Specifications

• Brand: Cole Hersee
• Product type: Switch
• Unit of measure: Each
• Switch type: Push - Pull
• Switch action: Off - On - SPST
• Number of poles: 1
• Number of positions: 2
• Voltage: 12

Application and Buying Notes

Before buying, confirm the part number M606BX matches the switch you need, then compare the listed dimensions of 32mm mount diameter and 22mm mount length with your panel or mounting location. These measurements are the most practical check when replacing an existing switch or planning a new installation.

The switch is rated at 10A @ 12V, so it should only be used within that electrical limit. If the circuit load is close to the rated current, verify the total draw of the accessory or circuit before installation. A switch intended for a lower current application may still physically fit but would not be the right choice for a heavier load.

Because this is a non-illuminated, sealed-contact, pre-wired push/pull switch, it suits buyers who want simple on/off control rather than a lighted switch face or multi-position function. The Off/On SPST layout means it is intended for one circuit only, which is important where a single switching function is all that is required.

The supplied product details do not include vehicle-specific fitment, so installation compatibility should be checked against the existing switch type, panel opening, wiring arrangement, and available clearance. If you are replacing a switch already in service, the existing part number and physical measurements are the best starting points.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number M606BX helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type SWITCH, Unit of Measure EACH, Warranty One Year, Switch Action Off - On - SPST, Lamp Colour/s Not Applicable, Mount Length 22mm, Number of Positions 2, Switch Illumination Non Illuminated, Product Group 2 FUSES BREAKERS RELAYS SWITCHES, Part No. M606BX.

Additional published details for cross-checking include Brand COLE HERSEE, Description Cole Hersee Push/Pull Switch Off/On SPST Brass Plasticised Pre-Wired Sealed (Contacts Rated 10A @ 12V), Power Rating (Amp) 10A @ 12V, Voltage 12, Mount Diameter 32mm, Number of Poles 1, Switch Type Push - Pull, Product Group 1 AUTO ELEC ACCESSORIES.

Cole Hersee Push/Pull Switch Off/On SPST Brass Plasticised Pre-Wired Sealed (Contacts Rated 10A @ 12V). Part number M606BX should be checked first. Listed voltage is 12. Listed output rating is 10A @ 12V. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number M606BX, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a switch in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 10A @ 12V should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Where no verified application list is available, the part number, mounting details, connector style, and published specifications should be used as the primary selection criteria.

Compatibility note: Please confirm compatibility using part number M606BX, the 32mm mount diameter, 22mm mount length, and the required 12V / 10A @ 12V specification before ordering. Vehicle-specific fitment is not listed for this item.

FAQ

What type of switch is this?

It is a Cole Hersee push/pull switch with Off/On SPST action, meaning it operates one circuit with two positions. For this listing, part number M606BX is the main reference point. Listed voltage is 12. Listed output rating is 10A @ 12V. These details should still be checked against the original unit before ordering.

What is the part number?

The listed part number is M606BX. For this listing, part number M606BX is the main reference point. Listed voltage is 12. Listed output rating is 10A @ 12V. These details should still be checked against the original unit before ordering.

Is the switch illuminated?

No. The switch is listed as non illuminated, and lamp colours are not applicable. For this listing, part number M606BX is the main reference point. Listed voltage is 12. Listed output rating is 10A @ 12V. These details should still be checked against the original unit before ordering.

What are the mounting dimensions?

The supplied measurements are 32mm mount diameter and 22mm mount length. For this listing, part number M606BX is the main reference point. Listed voltage is 12. Listed output rating is 10A @ 12V. These details should still be checked against the original unit before ordering.

What is the electrical rating?

It is rated at 10A @ 12V. For this listing, part number M606BX is the main reference point. Listed voltage is 12. Listed output rating is 10A @ 12V. These details should still be checked against the original unit before ordering.

Is vehicle fitment provided for this switch?

No vehicle-specific fitment is listed. Check the part number, mounting dimensions, switch action, and electrical rating against the existing application before ordering. For this listing, part number M606BX is the main reference point. Listed voltage is 12. Listed output rating is 10A @ 12V. These details should still be checked against the original unit before ordering.