Cole Hersee Continuous Duty Solenoid Switch 24V 100A 24624-10BX

The Cole Hersee continuous duty solenoid switch is a 24V, 100A unit identified as part number 24624-10BX. It is designed as a normally open, one-circuit off/on solenoid switch, which makes the electrical function clear for installations that need a controlled high-current switching device rather than a momentary relay arrangement.

Key construction details include copper stud terminals sized 5/16 inch-24, insulated coil terminals 10-32, and an F bracket mounting arrangement. The housing is glass nylon, and nuts and washers are included. Those details matter when checking terminal style, mounting space, and cable termination before installation.

This is listed as a continuous duty solenoid, so the duty type is an important check as well as the voltage and current rating. With a 24V supply and a 100 amp power rating, it is intended for applications where the electrical system matches those figures and the solenoid is expected to remain in service for longer operating periods.

Key Features

• 24V continuous duty solenoid switch
• 100 amp power rating
• Normally open, one circuit off/on
• Copper stud terminals, 5/16 inch-24
• Insulated coil terminals, 10-32
• Glass nylon housing

Specifications

• Brand: Cole Hersee
• Part No.: 24624-10BX
• Product type: Solenoid Switch
• Item type: Continuous Duty
• Voltage: 24
• Power rating: 100 amp
• Unit of measure: Each
• Warranty: One Year

Application and Buying Notes

Before ordering, confirm that your system is 24V and that the application calls for a continuous duty solenoid rated at 100A. Those are the two most important electrical checks, because voltage and current rating need to suit the circuit the solenoid is controlling.

The terminal configuration should also be matched carefully. This unit uses copper stud terminals at 5/16 inch-24 and insulated coil terminals at 10-32, with an F bracket mount. If your existing part uses different stud size, coil terminal style, or mounting arrangement, the replacement may not be a direct swap without further checking.

The glass nylon housing, silver contacts, and included nuts and washers are useful practical details, but they do not replace fitment checking. When replacing an existing unit, compare the part number 24624-10BX first, then check the voltage, duty type, terminal sizes, and bracket style against the vehicle or equipment requirements.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number 24624-10BX helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type SOLENOID SWITCH, Unit of Measure EACH, Warranty One Year, Voltage 24, Product Group 2 FUSES BREAKERS RELAYS SWITCHES, Part No. 24624-10BX, Brand COLE HERSEE, Description Continuous Duty Solenoid 24V 100A, Power Rating (Amp) 100.

Continuous Duty Solenoid 24V 100A. Part number 24624-10BX should be checked first. Listed voltage is 24. Listed output rating is 100. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number 24624-10BX, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a solenoid switch in workshop, fleet, trade, agricultural, or construction service, the listed voltage 24 and output 100 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Where no verified application list is available, the part number, mounting details, connector style, and published specifications should be used as the primary selection criteria.

In the absence of a verified fitment list, the safest approach is to compare the removed unit directly with the listed product details. That includes checking the housing style, pulley layout, regulator arrangement, and any visible identification numbers before supply is approved.

The listed warranty is One Year. Warranty terms should be considered alongside correct application and part identification, as warranty does not replace fitment confirmation.

Compatibility note: Confirm fitment using the part number 24624-10BX, the 24V system requirement, the 100A rating, and the terminal and bracket details before buying.

FAQ

What is the part number for this solenoid?

The part number is 24624-10BX. For this listing, part number 24624-10BX is the main reference point. Listed voltage is 24. Listed output rating is 100. These details should still be checked against the original unit before ordering.

What voltage is this solenoid rated for?

It is rated for 24V. For this listing, part number 24624-10BX is the main reference point. Listed voltage is 24. Listed output rating is 100. These details should still be checked against the original unit before ordering.

What is the current rating?

The power rating is 100 amp. For this listing, part number 24624-10BX is the main reference point. Listed voltage is 24. Listed output rating is 100. These details should still be checked against the original unit before ordering.

Is this a continuous duty solenoid?

Yes. The item type is listed as continuous duty. For this listing, part number 24624-10BX is the main reference point. Listed voltage is 24. Listed output rating is 100. These details should still be checked against the original unit before ordering.

What terminal sizes are listed?

It has copper stud terminals 5/16 inch-24 and insulated coil terminals 10-32. For this listing, part number 24624-10BX is the main reference point. Listed voltage is 24. Listed output rating is 100. These details should still be checked against the original unit before ordering.

Is fitment listed for specific vehicles?

No fitment applications are provided here, so compatibility should be confirmed by part number, voltage, terminal size, and mounting details before ordering. For this listing, part number 24624-10BX is the main reference point. Listed voltage is 24. Listed output rating is 100. These details should still be checked against the original unit before ordering.