Valeo Alternator 24V 60A Part No. 102052

This Valeo alternator is a 24V, 60A unit with part number 102052 and is listed as a new replacement item. It uses an internal regulator, twin leg alternator mount, and comes without a belt pulley, so it suits applications that match those mounting and pulley details.

The unit is identified as suitable for Mack G with MIDR 06.20.45 engine, and the fitment information also references Mack G330, G340, Manager, Maxter, Midliner and Premium applications. Those vehicle names are only helpful when the alternator specifications and mounting points match your existing unit.

Key physical details include 65mm inside mounting legs, 173mm mount centre-to-centre, 10mm pivot hole diameter, 8mm adjusting hole diameter, 82mm pulley outside diameter, and a 5.97kg weight. These measurements are the practical checks that matter before ordering, especially on 24V commercial vehicle electrical systems.

Key Features

• 24V alternator rated at 60A
• Valeo brand, part number 102052
• New unit, supplied each
• Internal regulator
• Twin leg alternator mount
• Without belt pulley

Specifications

• Voltage: 24V
• Charge current: 60A
• Alternator mount: Twin leg
• Mount centre to centre: 173mm
• Inside mounting legs: 65mm
• Pivot hole diameter: 10mm
• Adjusting hole diameter: 8mm
• Pulley outside diameter: 82mm

Fitment details

• To suit Mack G with MIDR 06.20.45 engine
• Fitment references also include Mack G330, G340, Manager, Maxter, Midliner and Premium applications
• Use the part number 102052 and the mounting measurements to confirm the correct replacement before ordering

Application and Buying Notes

When replacing a 24V alternator on a heavy vehicle, the part number 102052 is only one part of the check. You should match the twin leg mount, 173mm mount centre-to-centre measurement, and the 65mm inside mounting legs against the unit being removed, as small differences in mounting geometry can stop the alternator from fitting correctly.

This Valeo alternator is rated at 60A, so it is important to confirm the electrical demand of the vehicle and the original alternator specification before purchase. The unit has an internal regulator and is supplied without a belt pulley, which means the existing pulley arrangement and drive setup must be suitable for reuse or replacement with the correct matching parts.

The connector detail listed is with revcounter coupling, so the plug and instrument connection should be checked carefully against the vehicle loom and the removed alternator. If the original unit has a different connector style, pulley arrangement, or mount position, do not rely on the model name alone—use the full set of measurements and application details to confirm compatibility.

Because this is a new alternator and not a remanufactured unit, buyers generally expect it to be installed as a direct replacement for a matching application. Even so, the correct choice still depends on the alternator mount, hole diameters, regulator type, and whether the vehicle is one of the Mack applications referenced for this part.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number 102052 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty One Year, Inside Mounting Legs 65mm, Power Rating (Amp) 60, Pulley Section Not Applicable, Suits Unit Make Valeo, Alternator Mount Twin Leg, New / Reman. New, Position / Degree R 20.

Additional published details for cross-checking include Pulleys without belt pulley, Weight 5.97kg, Product Group 1 ROTATING ELECTRICAL, Part No. 102052, Brand VALEO, Description Valeo Alternator 24V 60A, Adjusting Hole Diameter 8, Pivot Hole Diameter 10, Pulley Outside Diameter 82mm, Regulator Type Internal.

Valeo Alternator 24V 60A. Part number 102052 should be checked first. Listed voltage is 24. Listed output rating is 60. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Twin Leg. Regulator type is Internal. Pulley configuration is Not Applicable. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number 102052, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 24 and output 60 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include MACK G330, MACK G330 1992, MACK G330 1993, MACK G330 1994. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

The listed warranty is One Year. Warranty terms should be considered alongside correct application and part identification, as warranty does not replace fitment confirmation.

Compatibility note: Please confirm fitment using part number 102052, the 24V 60A rating, the twin leg mounting details, and the Mack application references before ordering. Vehicle naming alone is not enough to confirm compatibility.

FAQ

What is the part number for this Valeo alternator?

The part number is 102052.

What voltage and output does this alternator have?

It is a 24V alternator rated at 60A.

Does this alternator include a pulley?

No. It is listed as without belt pulley.

What type of regulator does it use?

It uses an internal regulator.

Which engine application is specifically listed?

It is listed to suit Mack G with MIDR 06.20.45 engine.

What should I check before ordering?

Check the part number 102052, the 24V 60A rating, twin leg mount, 173mm mount centre-to-centre, 65mm inside mounting legs, connector style, and whether your vehicle matches the listed Mack application details.