Valeo Alternator 12V 70A 432829 New Internal Regulator Twin Leg

The Valeo Alternator 12V 70A, part number 432829, is a new alternator supplied as each unit. It is rated at 70 amps and 12 volts, with an internal regulator and a twin leg alternator mount.

Key mounting dimensions recorded for this unit include 65mm inside mounting legs, 164mm mount centre to centre, an 8mm adjusting hole diameter, and a 10mm pivot hole diameter. The pulley is an A section design with a 67mm outside diameter.

This alternator is listed with a connector arrangement of no connector for revolution counter, a right-hand 20 degree position, and a double pivot lever fastening type. It weighs 5.13kg and carries a one year warranty.

Valeo is noted as a leading OE manufacturer and supplier for many euro vehicles. For buyers matching a replacement alternator, the part number 432829 and the physical mounting measurements are the most important checkpoints before ordering.

Key Features

• 12V alternator rated at 70A
• New unit, supplied each
• Internal regulator
• Twin leg alternator mount
• A section pulley, 67mm outside diameter
• No connector for revolution counter

Specifications

• Brand: Valeo
• Part number: 432829
• Type: Alternator
• Voltage: 12V
• Power rating: 70A
• Alternator charge current: 70A
• Regulator type: Internal
• New / remanufactured: New

Fitment notes

• PEUGEOT 505
• PEUGEOT 505 1986
• PEUGEOT 505 1987
• PEUGEOT 505 1988
• PEUGEOT 505 1989
• PEUGEOT 505 1990
• PEUGEOT 505 1991
• PEUGEOT 505 1992

Application and Buying Notes

Before ordering, compare the part number 432829 with the number on your existing alternator, then check the mounting style and measurements. The recorded specifications for this unit include a twin leg mount, 65mm inside mounting legs, 164mm mount centre to centre, and 8mm adjusting and 10mm pivot hole diameters.

Pulley and charging details also matter when matching alternators. This Valeo unit is a 12V, 70A alternator with an internal regulator, an A section pulley, and a 67mm pulley outside diameter. Those details should be checked against the vehicle’s existing setup so the replacement matches the original configuration.

The connector arrangement is listed as no connector for revolution counter, so it is sensible to confirm the plug style and any accessory wiring before purchase. A right-hand 20 degree position and double pivot lever fastening type are also listed, which may help when comparing the physical orientation of the original unit.

Fitment is shown against Peugeot 505 and Peugeot 604 applications in the supplied vehicle data, including Peugeot 505 years 1986 through 1993 and Peugeot 604 years 1977 and 1978. Even with that application detail, alternator replacement is still best confirmed by matching the unit number, mount pattern, pulley, and connector arrangement on the vehicle already fitted.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number 432829 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty One Year, Inside Mounting Legs 65mm, Power Rating (Amp) 70, Pulley Section A, Suits Unit Make Valeo, Alternator Mount Twin Leg, New / Reman. New, Position / Degree R 20.

Additional published details for cross-checking include Connector / Clamp No Connector for Revolution Counter, Product Group 2 ALTERNATORS, Part No. 432829, Brand VALEO, Description Valeo Alternator 12V 70A, Adjusting Hole Diameter 8, Pivot Hole Diameter 10, Pulley Outside Diameter 67mm, Regulator Type Internal.

Valeo Alternator 12V 70A. Part number 432829 should be checked first. Listed voltage is 12. Listed output rating is 70. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Twin Leg. Regulator type is Internal. Pulley configuration is A. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number 432829, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 70 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Confirm compatibility by matching part number 432829, the twin leg mount, 65mm inside mounting legs, 164mm mount centre to centre, and the pulley and connector details against the alternator currently fitted to the vehicle.

FAQ

What is the part number for this alternator?

The part number listed for this Valeo alternator is 432829. For this listing, part number 432829 is the main reference point. Listed voltage is 12. Listed output rating is 70. Published fitment references include PEUGEOT 505, PEUGEOT 505 1986, PEUGEOT 505 1987. These details should still be checked against the original unit before ordering.

What voltage and amperage is it rated for?

It is a 12V alternator rated at 70A. For this listing, part number 432829 is the main reference point. Listed voltage is 12. Listed output rating is 70. Published fitment references include PEUGEOT 505, PEUGEOT 505 1986, PEUGEOT 505 1987. These details should still be checked against the original unit before ordering.

Is this a new unit or a remanufactured unit?

This alternator is listed as new. For this listing, part number 432829 is the main reference point. Listed voltage is 12. Listed output rating is 70. Published fitment references include PEUGEOT 505, PEUGEOT 505 1986, PEUGEOT 505 1987. These details should still be checked against the original unit before ordering.

What mounting style does it use?

It uses a twin leg alternator mount and a double pivot lever fastening type. For this listing, part number 432829 is the main reference point. Listed voltage is 12. Listed output rating is 70. Published fitment references include PEUGEOT 505, PEUGEOT 505 1986, PEUGEOT 505 1987. These details should still be checked against the original unit before ordering.

Which pulley details are listed?

The pulley is listed as an A section pulley with a 67mm outside diameter. For this listing, part number 432829 is the main reference point. Listed voltage is 12. Listed output rating is 70. Published fitment references include PEUGEOT 505, PEUGEOT 505 1986, PEUGEOT 505 1987. These details should still be checked against the original unit before ordering.

What vehicles are shown in the fitment data?

The supplied fitment data shows Peugeot 505 applications from 1986 through 1993, and Peugeot 604 applications for 1977 and 1978. For this listing, part number 432829 is the main reference point. Listed voltage is 12. Listed output rating is 70. Published fitment references include PEUGEOT 505, PEUGEOT 505 1986, PEUGEOT 505 1987. These details should still be checked against the original unit before ordering.