Mahle Alternator 12V 85A MG354

This Mahle alternator is a 12V, 85A unit, sold new and supplied each. It carries part number MG354 and is listed with an internal regulator, single leg mount, and no belt pulley fitted.

The mounting details matter on this unit: mount leg thickness is 56mm, mount centre to centre is 166mm, and both the adjusting hole diameter and pivot hole diameter are 8mm. Those measurements are the points to check against the vehicle before ordering.

It is noted as dust proof and for counter clockwise application. If you are replacing a worn alternator, the key checks are voltage, amperage, mounting style, pulley requirement, and the part number MG354 rather than relying on appearance alone.

Key Features

• 12V alternator with 85A output
• Mahle brand, part number MG354
• New unit, supplied each
• Internal regulator
• Single leg mount
• Dust proof design

Specifications

• Voltage: 12V
• Alternator charge current: 85A
• Power rating: 85A
• Mount leg thickness: 56mm
• Mount centre to centre: 166mm
• Adjusting hole diameter: 8mm
• Pivot hole diameter: 8mm
• Regulator type: Internal

Fitment guidance

• Fitment is listed against SAME applications, including ANTARES, COMPATTO, DORADO, FRUTTETO, and SILVER.
• Sample applications supplied include SAME ANTARES 1989, 1990, 1991, 1992, 1993, 1994, and 1995.
• A grouped preview also shows SAME DORADO 1982 and SAME COMPATTO 1997 among the applications provided.
• Use the part number MG354 and the mounting measurements to confirm the replacement unit before purchase.

Application and Buying Notes

When replacing an alternator, match the electrical rating and the physical layout before you commit. This unit is 12V and 85A, with an internal regulator, single leg mount, 56mm mount leg thickness, and 166mm mount centre to centre. Those details are the practical checks that usually determine whether the unit will suit the vehicle correctly.

The pulley arrangement is also important here because this alternator is supplied without a belt pulley. If the original unit has a pulley that needs to be transferred, or if the vehicle requires a different pulley arrangement, that needs to be confirmed before fitting. The note for counter clockwise application should also be checked against the vehicle’s original alternator direction.

The same applies to the mounting holes. An adjusting hole diameter of 8mm and pivot hole diameter of 8mm are useful confirmation points when comparing to the existing unit. Even where a vehicle is listed in the fitment data, the safest approach is to compare MG354, the mount dimensions, and the application details on the original alternator.

For workshop or retail buyers, the one year warranty provides a clear replacement window, but it does not remove the need to verify the installation requirements first. Matching the correct voltage, amperage, regulator type, pulley setup, and mounting measurements will save time at fitment and reduce the chance of ordering the wrong alternator.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number MG354 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty One Year, Mount Leg Thickness 56mm, Power Rating (Amp) 85, Suits Unit Make Mahle, Note Dust proof, For counter clockwise application., Mount Cnt to Cnt 166mm, Alternator Charge Current [A] 85, Packaging length 24.8.

Additional published details for cross-checking include Packaging height 17.50, Product Group 2 ALTERNATORS, Part No. MG354, Brand MAHLE, Description Mahle Alternator 12V 85A, Adjusting Hole Diameter 8, Pivot Hole Diameter 8, Regulator Type Internal, Voltage 12.

Mahle Alternator 12V 85A. Part number MG354 should be checked first. Listed voltage is 12. Listed output rating is 85. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Single Leg. Regulator type is Internal. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number MG354, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 85 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include SAME ANTARES, SAME ANTARES 1989, SAME ANTARES 1990, SAME ANTARES 1991. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

The listed warranty is One Year. Warranty terms should be considered alongside correct application and part identification, as warranty does not replace fitment confirmation.

Compatibility note: Please confirm compatibility using part number MG354, the 12V 85A specification, the single leg mount dimensions, and the listed SAME applications before ordering. If the original alternator differs in pulley, regulator, mounting style, or direction of rotation, do not assume this unit is the correct replacement.

FAQ

What is the part number for this alternator?

The part number supplied is MG354.

What voltage and output does it have?

It is a 12V alternator with an 85A output.

Does it come with a pulley?

No. This alternator is listed without a belt pulley.

What type of regulator does it use?

It has an internal regulator.

What vehicles is it listed for?

The fitment data supplied lists SAME applications, including ANTARES, COMPATTO, DORADO, FRUTTETO, and SILVER.

What should I check before ordering?

Confirm the part number MG354, 12V 85A rating, single leg mount, 56mm mount leg thickness, 166mm mount centre to centre, 8mm adjusting and pivot holes, and the counter clockwise application note.