Mahle Starter Motor 12V 10 Tooth CW New – MS293

This Mahle starter motor is a 12V unit with 10 teeth, clockwise rotation, and a 3.2kW power rating. It is listed as a new starter motor, part number MS293, with a 2 hole starter mount and 105mm mount centres.

Key physical points include an overall length of 321mm, a 82mm flange diameter, a 10.5mm mount hole diameter, and a 32mm pinion diameter. The pinion at rest is 35mm, and the unit is described as oiltight for wet or dry clutch applications.

The starter is specified with reduction gear transmission and 2 mounting bores. It is identified as a Mahle unit and carries a one year warranty, so matching the part number and the measured mounting details is the safest way to confirm suitability before ordering.

Key Features

• 12V starter motor
• 10 tooth pinion
• Clockwise rotation
• 3.2kW power rating
• 2 hole starter mount
• New unit

Specifications

• Part number: MS293
• Brand: Mahle
• Product type: Starter motor
• Voltage: 12V
• Power rating: 3.2kW
• Rotation: CW
• Number of teeth: 10
• Starter mount type: 2 hole

Fitment guidance

• Fitment is not confirmed here by exact vehicle application.
• The part is listed against Mahle part number MS293 and should be matched by part number and mounting measurements.
• Recorded application data includes various Atlas Copco, Claas, Clark, Dynapac, John Deere, Kubota, and TYM entries, but these should be checked against the exact machine and engine details before purchase.
• Do not rely on vehicle make alone; compare the 12V, 10 tooth, CW rotation, 105mm mount centres, 82mm flange diameter, and 321mm overall length against the existing unit.

Application and Buying Notes

When replacing a starter motor, the safest match is the part number MS293 together with the physical dimensions. This unit is a 12V Mahle starter motor with 10 teeth, clockwise rotation, 105mm mount centres, and a 321mm overall length, so the old starter should be checked side by side where possible.

The starter uses a 2 hole mounting pattern with 10.5mm mount hole diameter and an 82mm flange diameter. Those dimensions matter because even a starter with the right voltage can still fail to fit if the mount centres, flange, or pinion position differ.

The unit is rated at 3.2kW and uses reduction gear transmission. That combination is relevant when the machine calls for this style of starter, but it should not be assumed interchangeable with every 12V Mahle starter.

A one year warranty is listed for this new starter motor. Keep the part number, dimensions, and purchase details on hand so the replacement can be checked quickly if there is any doubt during installation or comparison with the removed unit.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number MS293 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty One Year, Mount Centres A 105mm, Number of Teeth 10, Pinion at Rest 35mm, Power Rating 3.2kW, Suits Unit Make Mahle, Item Type Starter Motor, Starter Mount Type 2 Hole.

Additional published details for cross-checking include Transmission Type with reduction gear, Bore O 1 10.5, Tooth Pitch 12.29, Mounting points diameter 105.0, Packaging width 16.60, Net Weight 7280, Product Group 1 ROTATING ELECTRICAL, Part No. MS293, Brand MAHLE, Description Mahle Starter Motor 12V 10Th CW.

Mahle Starter Motor 12V 10Th CW. Part number MS293 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number MS293, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include ATLAS COPCO XAS375, ATLAS COPCO XAS375 2010, ATLAS COPCO XAS90, CLAAS ARES, CLAAS ARES 2006, CLAAS ARES 2007. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Confirm compatibility by matching Mahle part number MS293, then verify the 12V system, 10 tooth CW configuration, 2 hole mount, 105mm mount centres, 82mm flange diameter, and 321mm overall length against the existing starter and application details.

FAQ

What is the part number for this starter motor?

The listed part number is MS293. For this listing, part number MS293 is the main reference point. Listed voltage is 12. Published fitment references include ATLAS COPCO XAS375, ATLAS COPCO XAS375 2010, ATLAS COPCO XAS90. These details should still be checked against the original unit before ordering.

What voltage does this starter motor use?

It is a 12V starter motor. For this listing, part number MS293 is the main reference point. Listed voltage is 12. Published fitment references include ATLAS COPCO XAS375, ATLAS COPCO XAS375 2010, ATLAS COPCO XAS90. These details should still be checked against the original unit before ordering.

Which way does the starter rotate?

The rotation is clockwise, shown as CW. For this listing, part number MS293 is the main reference point. Listed voltage is 12. Published fitment references include ATLAS COPCO XAS375, ATLAS COPCO XAS375 2010, ATLAS COPCO XAS90. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

The starter has 10 teeth. For this listing, part number MS293 is the main reference point. Listed voltage is 12. Published fitment references include ATLAS COPCO XAS375, ATLAS COPCO XAS375 2010, ATLAS COPCO XAS90. These details should still be checked against the original unit before ordering.

What are the main mounting dimensions?

The listed mounting details are 2 hole mounting, 105mm mount centres, 10.5mm mount hole diameter, and an 82mm flange diameter. For this listing, part number MS293 is the main reference point. Listed voltage is 12. Published fitment references include ATLAS COPCO XAS375, ATLAS COPCO XAS375 2010, ATLAS COPCO XAS90. These details should still be checked against the original unit before ordering.

Is this starter motor new or remanufactured?

It is listed as new. For this listing, part number MS293 is the main reference point. Listed voltage is 12. Published fitment references include ATLAS COPCO XAS375, ATLAS COPCO XAS375 2010, ATLAS COPCO XAS90. These details should still be checked against the original unit before ordering.