Mahle Starter Motor 12V 10 Teeth CW MS148

The MAHLE starter motor listed here is a 12V unit with 10 teeth, clockwise rotation, and part number MS148. It is a new starter motor with a 3.2kW power rating, built with a reduction gear transmission and a 3 hole starter mount type.

Key physical dimensions include overall length of 297mm, flange diameter of 89mm, pinion diameter of 32mm, pinion at rest of 48mm, and mounting points diameter of 127.0mm. Mount centres are shown as A 127mm, B 90mm, and C 90mm, with 3 mounting bores and a mount hole diameter of 11.

The unit is listed for dry clutch applications and carries a one year warranty. It is described as suitable for MAHLE units and is identified as MAHLE starter motor 12V 10Th CW, which makes the part number, voltage, rotation, tooth count, and mounting dimensions the most important checks before ordering.

Key Features

• 12V starter motor
• 10 teeth pinion
• Clockwise rotation
• 3.2kW power rating
• 3 hole starter mount
• Reduction gear transmission

Specifications

• Brand: MAHLE
• Part No.: MS148
• Product type: Starter Motor
• Voltage: 12V
• Rotation: CW
• Number of teeth: 10
• Power rating: 3.2kW
• Starter mount type: 3 Hole

Application fitment preview

• ALLIS CHALMERS 6124
• ALLIS CHALMERS 6125
• ALLIS CHALMERS 6144
• ALLIS CHALMERS 6145
• ALLIS CHALMERS 8310
• ALLIS CHALMERS 8410
• AMMANN VP2400
• BERTRAM 35

Application and Buying Notes

Before ordering, compare the part number MS148, the 12V electrical setup, and the clockwise rotation against the unit being replaced. The key mounting checks are the 3 hole starter mount, 3 mounting bores, 127mm mount centres A, and 90mm mount centres B and C, because these dimensions need to align with the engine or bellhousing arrangement.

The tooth count is 10 and the pinion diameter is 32mm, so the starter must match the ring gear and engagement setup used on the machine. The listed pinion at rest of 48mm, flange diameter of 89mm, and overall length of 297mm are useful cross-checks when confirming physical clearance around the starter location.

This is a 3.2kW starter motor with reduction gear transmission, so it is intended for applications that call for that configuration rather than a generic substitute. The unit is marked for dry clutch use, and the 11mm mount hole diameter should be compared carefully with the existing mounting hardware before purchase.

The fitment list includes a wide range of equipment and machinery names, but the safest way to confirm compatibility is to match the replacement starter by part number and then check the application details against the machine already fitted. Where a machine has been modified, replaced, or fitted with a different starter previously, the dimensions and rotation are just as important as the model name.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number MS148 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty One Year, Mount Centres A 127mm, Mount Centres C 90mm, Number of Teeth 10, Pinion at Rest 48mm, Power Rating 3.2kW, Suits Unit Make Mahle, Item Type Starter Motor.

Additional published details for cross-checking include Starter Mount Type 3 Hole, Transmission Type with reduction gear, Number of mounting bores 3, For flywheel depth 51.0, Mounting points diameter 127.0, Packaging width 21.50, Net Weight 8967, Product Group 1 ROTATING ELECTRICAL, Part No. MS148, Brand MAHLE.

Mahle Starter Motor 12V 10Th CW. Part number MS148 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number MS148, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include ALLIS CHALMERS 6124, ALLIS CHALMERS 6124 1993, ALLIS CHALMERS 6124 1994, ALLIS CHALMERS 6124 1995, AMMANN VP2400, AMMANN VP2400 2001. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Confirm fitment by matching part number MS148, 12V voltage, clockwise rotation, 10 tooth count, and the listed mounting dimensions against the existing starter and application details before ordering.

FAQ

What is the part number for this starter motor?

The part number is MS148. For this listing, part number MS148 is the main reference point. Listed voltage is 12. Published fitment references include ALLIS CHALMERS 6124, ALLIS CHALMERS 6124 1993, ALLIS CHALMERS 6124 1994. These details should still be checked against the original unit before ordering.

What voltage is this starter motor?

It is a 12V starter motor. For this listing, part number MS148 is the main reference point. Listed voltage is 12. Published fitment references include ALLIS CHALMERS 6124, ALLIS CHALMERS 6124 1993, ALLIS CHALMERS 6124 1994. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

The pinion has 10 teeth. For this listing, part number MS148 is the main reference point. Listed voltage is 12. Published fitment references include ALLIS CHALMERS 6124, ALLIS CHALMERS 6124 1993, ALLIS CHALMERS 6124 1994. These details should still be checked against the original unit before ordering.

What direction does this starter rotate?

It rotates clockwise (CW). For this listing, part number MS148 is the main reference point. Listed voltage is 12. Published fitment references include ALLIS CHALMERS 6124, ALLIS CHALMERS 6124 1993, ALLIS CHALMERS 6124 1994. These details should still be checked against the original unit before ordering.

Is this a new or remanufactured unit?

It is listed as new. For this listing, part number MS148 is the main reference point. Listed voltage is 12. Published fitment references include ALLIS CHALMERS 6124, ALLIS CHALMERS 6124 1993, ALLIS CHALMERS 6124 1994. These details should still be checked against the original unit before ordering.

What warranty is supplied?

A one year warranty is listed. For this listing, part number MS148 is the main reference point. Listed voltage is 12. Published fitment references include ALLIS CHALMERS 6124, ALLIS CHALMERS 6124 1993, ALLIS CHALMERS 6124 1994. These details should still be checked against the original unit before ordering.