Mahle Alternator 12V 95A New Internal Regulator MG314

The MAHLE Alternator MG314 is a new 12V unit rated at 95A, supplied as an each item for rotating electrical applications. It is listed with an internal regulator and a single-leg alternator mount, which are important identifiers when matching the unit to an existing installation.

This alternator is specified with a 56mm mount leg thickness, 56.0mm mounting bores distance, 86.0 mounting points diameter, 8mm adjusting hole diameter, and 10mm pivot hole diameter. It is supplied without a belt pulley, so the pulley arrangement on the vehicle or machine needs to be checked before purchase.

The connector / clamp is listed as W, and the alternator is identified as MAHLE brand, Part No. MG314. The unit carries a one year warranty and is described as a new replacement rather than remanufactured, which may matter for buyers comparing condition and service expectations.

Key Features

• 12V alternator rated at 95A
• New unit, not remanufactured
• Internal regulator
• Single-leg alternator mount
• Supplied without belt pulley
• Connector / clamp: W

Specifications

• Brand: MAHLE
• Product type: Alternator
• Voltage: 12V
• Charge current: 95A
• Power rating: 95 amp
• Regulator type: Internal
• Mount type: Single leg
• Mount leg thickness: 56mm

Known fitment references

• AGCO Allis 9670
• AGCO Allis 9690
• BMW 3
• BOMAG BC601RB
• BOMAG BW151 AD-4
• Deutz Allis 7110
• Deutz Allis 7120
• Deutz Allis 7145

Application and Buying Notes

Matching alternators should always start with the part number and mount details. MG314, the 12V system voltage, the 95A output, and the single-leg mount are the key checks here, because alternators that look similar can differ in regulator style, pulley arrangement, and bracket dimensions.

The pulley detail matters on this unit because it is supplied without a belt pulley. If your existing alternator uses a specific pulley style or offset, you will need to confirm whether your current pulley can be transferred or whether a separate pulley solution is required for your application.

The listed hole sizes and spacing are practical fit checks: 56mm mount leg thickness, 56.0mm mounting bores distance, 86.0 mounting points diameter, 8mm adjusting hole, and 10mm pivot hole. These measurements should be compared with the vehicle or machine mounting arrangement before ordering, especially where space around the brackets is tight.

The presence of an internal regulator is another important checkpoint. If the original alternator uses a different regulation setup, the unit may not be a direct match even when the electrical rating appears similar. Checking the existing connector / clamp style, listed here as W, can help avoid unnecessary delays.

Fitment references are broad and include machinery and vehicle groups such as AGCO Allis, BMW 3, BOMAG, Deutz Allis, Deutz-Fahr, Fendt, Iveco, Liebherr, Terex O&K, and Wacker Neuson. Those references are useful as guidance, but the safest confirmation is still the part number and the physical mounting and connector details on the existing unit.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number MG314 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty One Year, Mount Leg Thickness 56mm, Power Rating (Amp) 95, Suits Unit Make Mahle, Alternator Mount Single Leg, Alternator Charge Current [A] 95, Connector / Clamp W, Mounting points diameter 86.0.

Additional published details for cross-checking include Packaging width 18.60, Net Weight 5102, Product Group 1 ROTATING ELECTRICAL, Part No. MG314, Brand MAHLE, Description Mahle Alternator 12V 95A, Adjusting Hole Diameter 8, Pivot Hole Diameter 10, Regulator Type Internal, Voltage 12.

Mahle Alternator 12V 95A. Part number MG314 should be checked first. Listed voltage is 12. Listed output rating is 95. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Single Leg. Regulator type is Internal. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number MG314, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 95 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include AGCO ALLIS 9670, AGCO ALLIS 9670 1994, AGCO ALLIS 9670 1995, AGCO ALLIS 9670 1996, BMW 3, BMW 3 1990. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

The listed warranty is One Year. Warranty terms should be considered alongside correct application and part identification, as warranty does not replace fitment confirmation.

Compatibility note: Confirm fitment using MAHLE Part No. MG314, the 12V 95A specification, the single-leg mount, internal regulator, connector / clamp W, and the listed mounting measurements before ordering. The pulley is not included, so pulley requirements should also be checked against the existing application.

FAQ

Is this alternator new or remanufactured?

It is listed as new, not remanufactured.

What is the electrical rating of this alternator?

The unit is 12V with a 95A charge current and 95 amp power rating.

Does this alternator include a belt pulley?

No. It is supplied without a belt pulley.

What type of regulator does it have?

It has an internal regulator.

What is the part number?

The listed part number is MG314.

What fitment should I check before buying?

Check the part number, 12V 95A rating, single-leg mount, connector / clamp W, and the listed mounting measurements: 56mm mount leg thickness, 56.0mm mounting bores distance, 86.0 mounting points diameter, 8mm adjusting hole, and 10mm pivot hole.