Mahle Starter Motor 12V 9 Tooth CCW MS436

The Mahle MS436 starter motor is a 12V, 1kW unit with 9 teeth and counter-clockwise rotation. It is listed as a new starter motor with a cradle starter mount type, a 66mm flange diameter, and an overall length of 220mm, so it is important to compare the physical dimensions and drive arrangement before ordering.

This unit has a pinion at rest measurement of 17mm, a pinion diameter of 30mm, and a flywheel depth note of 20. Those measurements matter when you are confirming engagement depth and starter layout, particularly where the installation is tight or the original starter has a specific drive-end offset.

Mahle describes this starter as dust proof and notes an offset drive end bracket. It is also listed as providing resistance to salt, fog, humidity, water, dust, mud, vibration, extreme temperatures, and aggressive liquids, with compliance to electromagnetic compatibility standards and other international directives and standards.

Key Features

• 12V starter motor
• 1kW power rating
• 9-tooth pinion
• Counter-clockwise rotation
• New unit
• Dust proof construction

Specifications

• Brand: Mahle
• Part No.: MS436
• Product type: Starter Motor
• Voltage: 12V
• Power rating: 1kW
• Rotation: CCW
• Number of teeth: 9
• Pinion at rest: 17mm

Fitment guidance

• Verified fitment references include AMMANN AFW150-2, AMMANN APR4920, AMMANN APR5920, HATZ 1B40, and HATZ 1B50.
• Application listings also reference model years including 1989 and 2015 in the supplied fitment data.
• Fitment tokens are limited, so the safest check is to match the part number MS436 and compare the starter layout, rotation, tooth count, flange diameter, overall length, and pinion measurements against the removed unit.

Application and Buying Notes

Before buying, confirm the part number MS436, the 12V electrical system, and the CCW rotation. Those three points are critical because a starter that is correct in appearance can still be unsuitable if the voltage, rotation direction, or drive arrangement does not match the vehicle or machine.

The listed 9-tooth pinion, 17mm pinion-at-rest measurement, 30mm pinion diameter, 66mm flange diameter, and 220mm overall length give you a practical way to compare the replacement against the original starter. If the old unit is available, measuring the mounting face and drive end layout is the most reliable way to avoid an installation mismatch.

This starter is described as dust proof and as having an offset drive end bracket. That makes the mounting style and clearance around the starter important, especially on equipment where the engine bay or bellhousing area leaves little room for variation. The cradle mount type and dry clutch listing are also useful checks when you are comparing like for like.

The 1kW power rating should be assessed in the context of the original starter specification rather than assumed to be interchangeable with any 12V unit. If your application is one of the listed AMMANN or HATZ references, it is still wise to verify the physical starter dimensions and drive engagement details before purchase.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number MS436 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty One Year, Number of Teeth 9, Pinion at Rest 17mm, Power Rating 1kW, Suits Unit Make Mahle, Note Dust proof. Off set drive end bracket, New / Reman. New, Wet / Dry Clutch Dry.

Additional published details for cross-checking include Number of mounting bores 0, Connecting Angle [Degree] 0, Packaging length 25.0, Packaging height 13.60, Product Group 2 STARTER MOTORS, Part No. MS436, Brand MAHLE, Description Mahle Starter Motor 12V 9Th CCW, Flange Diameter 66mm.

Mahle Starter Motor 12V 9Th CCW. Part number MS436 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number MS436, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include AMMANN AFW150-2, AMMANN AFW150-2 2015, AMMANN APR4920, AMMANN APR4920 2015, HATZ 1B40, HATZ 1B40 1989. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Please confirm compatibility using part number MS436, the 12V and CCW specifications, and the supplied dimensions and fitment references before ordering. Do not rely on model name alone when checking replacement starter motors.

FAQ

What is the part number for this starter motor?

The part number listed is MS436. For this listing, part number MS436 is the main reference point. Listed voltage is 12. Published fitment references include AMMANN AFW150-2, AMMANN AFW150-2 2015, AMMANN APR4920. These details should still be checked against the original unit before ordering.

What voltage is this starter motor?

It is a 12V starter motor. For this listing, part number MS436 is the main reference point. Listed voltage is 12. Published fitment references include AMMANN AFW150-2, AMMANN AFW150-2 2015, AMMANN APR4920. These details should still be checked against the original unit before ordering.

What rotation does this starter motor have?

It is listed as CCW, which means counter-clockwise rotation. For this listing, part number MS436 is the main reference point. Listed voltage is 12. Published fitment references include AMMANN AFW150-2, AMMANN AFW150-2 2015, AMMANN APR4920. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

The starter is listed with 9 teeth. For this listing, part number MS436 is the main reference point. Listed voltage is 12. Published fitment references include AMMANN AFW150-2, AMMANN AFW150-2 2015, AMMANN APR4920. These details should still be checked against the original unit before ordering.

What are the key physical dimensions?

The listed dimensions include a 66mm flange diameter, 220mm overall length, a 30mm pinion diameter, and a 17mm pinion-at-rest measurement. For this listing, part number MS436 is the main reference point. Listed voltage is 12. Published fitment references include AMMANN AFW150-2, AMMANN AFW150-2 2015, AMMANN APR4920. These details should still be checked against the original unit before ordering.

Which applications are shown in the fitment data?

The supplied fitment references include AMMANN AFW150-2, AMMANN APR4920, AMMANN APR5920, HATZ 1B40, and HATZ 1B50, with some entries shown for 1989 and 2015. For this listing, part number MS436 is the main reference point. Listed voltage is 12. Published fitment references include AMMANN AFW150-2, AMMANN AFW150-2 2015, AMMANN APR4920. These details should still be checked against the original unit before ordering.