Mahle Starter Motor 12V 11T CCW MS132

The Mahle starter motor MS132 is a new 12V unit with 11 teeth and counter-clockwise rotation. It is listed as a dry-clutch starter motor with a 1.0kW power rating, 2-hole starter mount type, and a flange diameter of 76mm.

Key dimensions include an overall length of 195mm, a pinion diameter of 36mm, a pinion at rest of 15mm, and a mount hole diameter of 10mm. The mounting points diameter is 100.0mm, with centre-to-centre mounting at 98mm and a for flywheel depth figure of 18.0.

This unit is identified as Mahle part number MS132 and is supplied as each. The listed warranty is one year. Where fitment matters, the most reliable checks are the part number, starter mount type, tooth count, rotation, voltage, and physical dimensions before ordering.

Key Features

• 12V starter motor
• 11-tooth pinion
• Counter-clockwise rotation
• New unit, not remanufactured
• 2-hole starter mount
• 1.0kW power rating

Specifications

• Brand: Mahle
• Part number: MS132
• Type: Starter motor
• Voltage: 12V
• Power rating: 1.0kW
• Rotation: CCW
• Number of teeth: 11
• Starter mount type: 2 hole

Fitment Information

• BOMAG BPR55/65D
• BOMAG BPR55/65D 2012
• HUSQVARNA CONSTRUCTION LG400
• HUSQVARNA CONSTRUCTION LG400 2018
• LOMBARDINI 15LD
• LOMBARDINI 15LD 2007
• LOMBARDINI LDW1503
• LOMBARDINI LDW1503 1989

Application and Buying Notes

Fitment is listed against BOMAG, Husqvarna Construction, and Lombardini applications, including BPR55/65D, LG400, 15LD, LDW1503, and LDW2004 references. Even where a model name appears to match, confirm the starter is the same 12V, 11-tooth, CCW configuration with the same 2-hole mount and 76mm flange before buying.

The dimensional checks are important on this starter. The overall length is 195mm, the pinion diameter is 36mm, the pinion at rest is 15mm, and the mounting pattern includes a 100.0mm mounting points diameter with 98mm centre-to-centre spacing. Those figures help confirm physical interchangeability when the original starter is no longer installed or the machine has had previous repairs.

The flywheel and drive side should also be checked carefully. This starter is listed with 18.0 flywheel depth and 11 teeth, so the pinion engagement must align with the existing application. If the original unit carries a matching Mahle MS132 reference, that is the strongest cross-check alongside voltage, rotation, and mount style.

Because starter motors can vary by engine build, machine year, and previous component changes, it is wise to compare the old starter’s tag, the mounting face, and the wiring arrangement before ordering. The one-year warranty applies to the part supplied, but correct application still depends on matching the technical details above.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number MS132 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty One Year, Mount Hole Diameter 10, Overall Length 195mm, Pinion Diameter 36mm, Rotation CCW, Voltage 12, New / Reman. New, Wet / Dry Clutch Dry.

Additional published details for cross-checking include Number of mounting bores 2, For flywheel depth 18.0, Mounting points diameter 100.0, Packaging width 16.60, Net Weight 3885, Product Group 1 ROTATING ELECTRICAL, Part No. MS132, Brand MAHLE, Description Mahle Starter Motor 12V 11Th CCW, Flange Diameter 76mm.

Mahle Starter Motor 12V 11Th CCW. Part number MS132 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number MS132, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include BOMAG BPR55/65D, BOMAG BPR55/65D 2012, HUSQVARNA CONSTRUCTION LG400, HUSQVARNA CONSTRUCTION LG400 2018, LOMBARDINI 15LD, LOMBARDINI 15LD 2007. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Confirm compatibility using the Mahle MS132 part number, 12V rating, 11-tooth CCW specification, 2-hole mount, and the stated dimensions before purchase. If there is any difference in the original starter, flywheel depth, or mounting pattern, verify the application against the machine details first.

FAQ

What is the part number for this Mahle starter motor?

The listed part number is MS132. For this listing, part number MS132 is the main reference point. Listed voltage is 12. Published fitment references include BOMAG BPR55/65D, BOMAG BPR55/65D 2012, HUSQVARNA CONSTRUCTION LG400. These details should still be checked against the original unit before ordering.

What voltage and rotation does this starter motor have?

It is a 12V starter motor with counter-clockwise (CCW) rotation. For this listing, part number MS132 is the main reference point. Listed voltage is 12. Published fitment references include BOMAG BPR55/65D, BOMAG BPR55/65D 2012, HUSQVARNA CONSTRUCTION LG400. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

The pinion has 11 teeth. For this listing, part number MS132 is the main reference point. Listed voltage is 12. Published fitment references include BOMAG BPR55/65D, BOMAG BPR55/65D 2012, HUSQVARNA CONSTRUCTION LG400. These details should still be checked against the original unit before ordering.

Is this a new or remanufactured unit?

This is listed as a new starter motor, not remanufactured. For this listing, part number MS132 is the main reference point. Listed voltage is 12. Published fitment references include BOMAG BPR55/65D, BOMAG BPR55/65D 2012, HUSQVARNA CONSTRUCTION LG400. These details should still be checked against the original unit before ordering.

What mounting style does it use?

It is listed as a 2-hole starter mount with 2 mounting bores and a 76mm flange diameter. For this listing, part number MS132 is the main reference point. Listed voltage is 12. Published fitment references include BOMAG BPR55/65D, BOMAG BPR55/65D 2012, HUSQVARNA CONSTRUCTION LG400. These details should still be checked against the original unit before ordering.

Which applications are listed for fitment?

Listed applications include BOMAG BPR55/65D, HUSQVARNA CONSTRUCTION LG400, and LOMBARDINI 15LD, LDW1503, and LDW2004 references, including some year-specific entries. For this listing, part number MS132 is the main reference point. Listed voltage is 12. Published fitment references include BOMAG BPR55/65D, BOMAG BPR55/65D 2012, HUSQVARNA CONSTRUCTION LG400. These details should still be checked against the original unit before ordering.