OEX Alternator 24V 80A Bosch Style BXA9052

The OEX Alternator BXA9052 is a new 24V, 80A unit designed in Bosch style and supplied as an alternator for rotating electrical applications. It uses an internal regulator, twin leg alternator mount, 17mm shaft diameter and 71mm inside mounting legs, with 174mm mount centre to centre.

This unit is listed with a 10mm adjusting hole diameter and 10mm pivot hole diameter, which are useful points to check against the original alternator before ordering. It is a 7.4kg alternator, so the physical mounting arrangement and clearance should be compared carefully with the existing unit and bracket set-up.

OEX identifies this alternator as suitable for Bosch unit make applications, but that still needs to be matched to the vehicle and the original part details. The part number is BXA9052, and the 24V 80A specification should be confirmed wherever the charging system is required to remain within that electrical setup.

Key Features

• New alternator, not remanufactured
• 24V, 80A output
• Bosch style design
• Internal regulator
• Twin leg alternator mount
• 17mm shaft diameter

Specifications

• Part No.: BXA9052
• Brand: OEX
• Product type: Alternator
• Voltage: 24V
• Power rating: 80 amp
• Regulator type: Internal
• Suits unit make: Bosch
• Alternator mount: Twin leg

Fitment notes

• Fitment references include FIAT, FIAT ALLIS, INTERNATIONAL, IVECO and SCANIA applications.
• Sample applications listed include FIAT ALLIS 65B, INTERNATIONAL E-SERIES, IVECO 90-17W and SCANIA 3 - SERIES.
• Year coverage shown in the application data includes examples such as 1978 to 1987 for FIAT ALLIS 65B, 1987 to 1996 for IVECO 90-17W, 1991 to 1994 for INTERNATIONAL E-SERIES, and 1988 to 1997 for SCANIA 3 - SERIES.
• The fitment data names Bosch as the unit make, so the original alternator style and mounting dimensions should still be checked against the removed unit before purchase.

Application and Buying Notes

For this alternator, the key buying checks are the 24V system, 80A output, Bosch style form, and the twin leg mount with 71mm inside mounting legs. A replacement alternator can look similar but still differ in shaft size, hole spacing or bracket geometry, so the 17mm shaft diameter and 174mm mount centre to centre should be compared with the unit being replaced.

The internal regulator is another important point, because regulator type needs to match the vehicle’s charging system arrangement. If the original unit uses a different regulator setup, the alternator may not be a direct swap even when the casing looks close.

The listed fitment group covers a range of heavy vehicle and equipment applications, including FIAT ALLIS, INTERNATIONAL, IVECO and SCANIA references. That broad listing is useful, but it is not a substitute for checking the actual alternator on the vehicle, the part number BXA9052, and the mounting dimensions before ordering.

If you are replacing a worn or failed alternator, compare the old unit’s mounting ears, shaft, pulley alignment and electrical connection layout against the details here. The 10mm adjusting hole and 10mm pivot hole are especially important where brackets are tight or non-standard, because those small differences can affect installation even when the amperage rating is correct.

The 7.4kg weight also gives a useful sense of the unit’s size and construction, but it should not be used on its own as a fitment guide. The safest approach is to match the part number, confirm the 24V charging system, and verify the original Bosch style application details against the vehicle specification.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number BXA9052 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Inside Mounting Legs 71mm, Power Rating (Amp) 80, Shaft Diameter 17mm, Voltage 24, Mount Cnt to Cnt 174mm, Shaft Dimension 17.

Additional published details for cross-checking include Product Group 2 ALTERNATORS, Part No. BXA9052, Brand OEX, Description OEX Alternator 24V 80A Bosch Style, Adjusting Hole Diameter 10, Pivot Hole Diameter 10, Regulator Type Internal, Suits Unit Make Bosch, Alternator Mount Twin Leg, New / Reman. New.

OEX Alternator 24V 80A Bosch Style. Part number BXA9052 should be checked first. Listed voltage is 24. Listed output rating is 80. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Twin Leg. Regulator type is Internal. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number BXA9052, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 24 and output 80 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Confirm fitment by matching part number BXA9052, the 24V 80A rating, Bosch style application, and all mounting dimensions against the original alternator and vehicle application before purchase.

FAQ

What is the part number for this alternator?

The part number is BXA9052.

Is this alternator new or remanufactured?

It is listed as new.

What voltage and output does it have?

It is a 24V alternator with an 80A power rating.

Does it use an internal regulator?

Yes. The regulator type is listed as internal.

What mounting details should be checked before ordering?

Check the twin leg mount arrangement, 71mm inside mounting legs, 174mm mount centre to centre, 17mm shaft diameter, and the 10mm adjusting and pivot holes.

What vehicles or applications are shown in the fitment data?

The fitment data references FIAT, FIAT ALLIS, INTERNATIONAL, IVECO and SCANIA applications, including examples such as FIAT ALLIS 65B, INTERNATIONAL E-SERIES, IVECO 90-17W and SCANIA 3 - SERIES.