OEX Starter Motor 12V 9TH CW Delco 10MT Style DXS9101

The OEX Starter Motor DXS9101 is a 12V starter motor in 10MT style with 9 teeth, clockwise rotation, and a 1.6kW power rating. It is listed as a new unit with a pad mount type, and the starter is noted as suited to Delco applications.

Key dimensions on this starter motor include an 83mm mount centres A measurement, 68mm flange diameter, 10mm mount hole diameter, 25mm pinion diameter, and 265mm overall length. The pinion at rest is 8mm, and the unit weighs 6.12kg.

This is a dry clutch starter motor intended for SD260 Series inline mount applications. The listed part number is DXS9101, and the product is supplied under the OEX brand in the rotating electrical category.

Key Features

• 12V starter motor, 10MT style
• 9-tooth pinion with clockwise rotation
• 1.6kW power rating
• New unit, pad mount type
• Suits Delco unit make
• Dry clutch application

Specifications

• Brand: OEX
• Part No.: DXS9101
• Type: Starter Motor
• Voltage: 12V
• Power Rating: 1.6kW
• Series: 10MT
• Number of Teeth: 9
• Rotation: CW

Known application groups

• CHEVROLET C10
• CHEVROLET C30
• CHEVROLET CAMARO
• CHEVROLET CORVETTE
• CHEVROLET IMPALA
• HOLDEN MONARO

Application and Buying Notes

Before ordering, match the part number DXS9101 against the vehicle application and the starter layout on the vehicle. The key checks here are 12V operation, 9-tooth pinion count, clockwise rotation, 10MT style, and the pad mount arrangement, because these details need to align with the replacement unit.

The physical measurements matter on starters. This unit lists 83mm mount centres A, a 68mm flange diameter, 10mm mount hole diameter, 25mm pinion diameter, 265mm overall length, and 8mm pinion at rest. If any of those mounting points or clearances differ on the vehicle, it should be treated as a mismatch until confirmed.

The note on the listing says SD260 Series inline mount, and the unit is suited to Delco applications. That combination is useful for identification, but it should still be checked against the existing starter and the vehicle's setup before purchase. A starter motor that appears close but differs in tooth count, rotation, or mount style may not install correctly.

The warranty is listed as 3 years for passenger use and 1 year for commercial use. As with any rotating electrical part, the right way to buy is to verify the existing starter's part number, mounting style, and electrical specification first, then compare the dimensions and application details second.

If the vehicle has been modified, if the engine or bellhousing has changed, or if an earlier repair used a different starter arrangement, confirm the fitment carefully. The safest approach is to compare the old unit side-by-side with DXS9101 using the tooth count, rotation direction, pad mount type, and the listed measurements.

OEX states the product is sourced from ISO certified factories and backed by a nationwide warranty. Those are useful supply and support details, but the important buying decision still comes down to correct application matching and confirming the starter is the right 12V Delco-style 10MT unit for the vehicle.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number DXS9101 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Mount Centres A 83mm, Number of Teeth 9, Pinion at Rest 8mm, Power Rating 1.6kW, Series 10MT, Voltage 12, New / Reman. New.

Additional published details for cross-checking include Wet / Dry Clutch Dry, Product Group 2 STARTER MOTORS, Part No. DXS9101, Brand OEX, Description OEX Starter Motor 12V 9Th CW Delco 10MT Style, Flange Diameter 68mm, Mount Hole Diameter 10, Overall Length 265mm, Pinion Diameter 25mm.

OEX Starter Motor 12V 9Th CW Delco 10MT Style. Part number DXS9101 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number DXS9101, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

Compatibility note: Confirm fitment using part number DXS9101, the 12V 9-tooth clockwise 10MT specification, the pad mount type, and the listed measurements before ordering. Application data is provided for known Chevrolet and Holden groups, but final compatibility should be checked against the vehicle and the existing starter.

FAQ

What is the part number for this starter motor?

The part number listed is DXS9101. For this listing, part number DXS9101 is the main reference point. Listed voltage is 12. Published fitment references include CHEVROLET C10, CHEVROLET C10 1974, CHEVROLET C10 1975. These details should still be checked against the original unit before ordering.

What voltage and rotation does this starter motor use?

It is a 12V starter motor with clockwise rotation. For this listing, part number DXS9101 is the main reference point. Listed voltage is 12. Published fitment references include CHEVROLET C10, CHEVROLET C10 1974, CHEVROLET C10 1975. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

The pinion has 9 teeth. For this listing, part number DXS9101 is the main reference point. Listed voltage is 12. Published fitment references include CHEVROLET C10, CHEVROLET C10 1974, CHEVROLET C10 1975. These details should still be checked against the original unit before ordering.

What mount style is listed?

The starter is listed as a pad mount type. For this listing, part number DXS9101 is the main reference point. Listed voltage is 12. Published fitment references include CHEVROLET C10, CHEVROLET C10 1974, CHEVROLET C10 1975. These details should still be checked against the original unit before ordering.

Is this unit new or remanufactured?

It is listed as a new starter motor. For this listing, part number DXS9101 is the main reference point. Listed voltage is 12. Published fitment references include CHEVROLET C10, CHEVROLET C10 1974, CHEVROLET C10 1975. These details should still be checked against the original unit before ordering.

What warranty is listed?

The warranty is listed as 3 years for passenger use and 1 year for commercial use. For this listing, part number DXS9101 is the main reference point. Listed voltage is 12. Published fitment references include CHEVROLET C10, CHEVROLET C10 1974, CHEVROLET C10 1975. These details should still be checked against the original unit before ordering.