OEX Starter Motor 12V 9T CW Delco 10MT Style DXS9108

The OEX starter motor listed here is a 12V unit with 9 teeth, clockwise rotation, and a 10MT style design. It is identified by part number DXS9108 and is supplied as a new starter motor for wet or dry clutch applications where the physical and electrical specifications match.

Key dimensions include 127mm mount centres A, 90mm mount centres B, 90mm mount centres C, a 3 hole starter mount type, and an 89mm flange diameter. The unit measures 304mm overall length, uses 10mm mount hole diameter, and has a pinion diameter of 29mm with the pinion at rest measuring 18mm.

This starter motor is rated at 2.3kW and weighs 10.9kg. It is listed as a Delco suit unit make and forms part of the OEX rotating electrical range, with the product supplied new rather than remanufactured.

Key Features

• 12V starter motor
• 9-tooth pinion
• Clockwise rotation
• 10MT style
• Delco suit unit make
• New unit

Specifications

• Part No.: DXS9108
• Brand: OEX
• Type: Starter Motor
• Voltage: 12V
• Power rating: 2.3kW
• Number of teeth: 9
• Rotation: CW
• Series: 10MT

Known application groups supplied

• BARKO various
• BARKO various 1980
• CATERPILLAR 815F
• CATERPILLAR 815F 2000
• CLARK 1075
• CLARK 1075 1975
• CLARK 1080
• CLARK 1080 1982

Application and Buying Notes

Before ordering, compare the part number DXS9108, the 12V electrical specification, and the 10MT style against the starter currently fitted to the machine. The mounting layout is specific: 3 hole mount, 127mm mount centres A, 90mm mount centres B, 90mm mount centres C, and an 89mm flange diameter.

The pinion and rotation details also need to match the application. This unit is 9 tooth with clockwise rotation, a 29mm pinion diameter, and 18mm pinion at rest, so it should only be selected where those values align with the original starter or the required replacement.

The listed application groups include selected BARKO, CATERPILLAR, CLARK, and JCB machines, but those names are only a guide to known usage. Final confirmation should always come from the part number, mount measurements, and the machine’s existing starter details, especially where equipment has been modified or fitted with non-standard components.

At 2.3kW and 10.9kg, this is a substantial starter motor, so allow for the physical size and handling during installation. The unit is supplied new and is listed for wet or dry clutch use, which helps narrow the application, but it does not remove the need to confirm the exact fit before purchase.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number DXS9108 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Mount Centres A 127mm, Mount Centres C 90mm, Number of Teeth 9, Pinion at Rest 18mm, Power Rating 2.3kW, Series 10MT, Voltage 12.

Additional published details for cross-checking include Starter Mount Type 3 Hole, Weight 10.9kg, Product Group 1 ROTATING ELECTRICAL, Part No. DXS9108, Brand OEX, Description OEX Starter Motor 12V 9Th CW Delco 10MT Style, Flange Diameter 89mm, Mount Centres B 90mm, Mount Hole Diameter 10, Overall Length 304mm.

OEX Starter Motor 12V 9Th CW Delco 10MT Style. Part number DXS9108 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number DXS9108, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include BARKO VARIOUS, BARKO VARIOUS 1980, CATERPILLAR 815F, CATERPILLAR 815F 2000, CLARK 1075, CLARK 1075 1975. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Confirm compatibility by matching part number DXS9108, 12V, 9 tooth, CW rotation, 10MT style, and the mounting dimensions against the starter currently fitted to the equipment.

FAQ

What is the part number for this starter motor?

The part number supplied is DXS9108. For this listing, part number DXS9108 is the main reference point. Listed voltage is 12. Published fitment references include BARKO VARIOUS, BARKO VARIOUS 1980, CATERPILLAR 815F. These details should still be checked against the original unit before ordering.

Is this starter motor 12V or 24V?

It is a 12V starter motor. For this listing, part number DXS9108 is the main reference point. Listed voltage is 12. Published fitment references include BARKO VARIOUS, BARKO VARIOUS 1980, CATERPILLAR 815F. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

The pinion has 9 teeth. For this listing, part number DXS9108 is the main reference point. Listed voltage is 12. Published fitment references include BARKO VARIOUS, BARKO VARIOUS 1980, CATERPILLAR 815F. These details should still be checked against the original unit before ordering.

What rotation does this starter motor use?

It is clockwise rotation, listed as CW. For this listing, part number DXS9108 is the main reference point. Listed voltage is 12. Published fitment references include BARKO VARIOUS, BARKO VARIOUS 1980, CATERPILLAR 815F. These details should still be checked against the original unit before ordering.

Is this unit new or remanufactured?

It is listed as new, not remanufactured. For this listing, part number DXS9108 is the main reference point. Listed voltage is 12. Published fitment references include BARKO VARIOUS, BARKO VARIOUS 1980, CATERPILLAR 815F. These details should still be checked against the original unit before ordering.

Which machines are listed as known application groups?

Known application groups supplied include BARKO various, CATERPILLAR 815F, CLARK 1075, CLARK 1080, CLARK 975, and JCB 434S, 436EHT, and 436EZX variants. Final fitment still needs to be confirmed against the part number and mounting details. For this listing, part number DXS9108 is the main reference point. Listed voltage is 12. Published fitment references include BARKO VARIOUS, BARKO VARIOUS 1980, CATERPILLAR 815F. These details should still be checked against the original unit before ordering.