OEX Starter Motor 12V 10T CW Lucas Style LXS9302

The OEX Starter Motor LXS9302 is a 12V, clockwise rotation starter motor with 10 teeth and a 2.8kW power rating. It is listed as a Lucas style unit and is supplied new, with a 3 hole starter mount type and a dry clutch application.

Key dimensions to check before ordering include 127mm mount centres A, 90mm mount centres B and C, 89mm flange diameter, 310mm overall length, 40mm pinion diameter and 30mm pinion at rest. The mounting hole diameter is 10mm, and the unit weighs 13.7kg.

This starter is noted for the M50 Series with a passenger side Perkins mount. If your vehicle or equipment uses a drivers side mount, the listed alternative is DXS569. Matching the mount side, tooth count, rotation and overall dimensions matters just as much as matching the part number.

Key Features

• 12V starter motor, clockwise rotation
• 10 tooth pinion
• 2.8kW power rating
• Lucas style unit
• New starter motor
• 3 hole starter mount

Specifications

• Part No.: LXS9302
• Brand: OEX
• Unit of measure: Each
• Voltage: 12V
• Rotation: CW
• Number of teeth: 10
• Power rating: 2.8kW
• Starter mount type: 3 hole

Compatibility and application guidance

• M50 Series
• Passenger side Perkins mount
• Use DXS569 for drivers side mount

Application and Buying Notes

Before ordering, confirm the part number LXS9302 against your existing starter and check the mounting arrangement carefully. The listing identifies this as a 12V, 10 tooth, clockwise unit with a 3 hole mount, so those details need to line up with the original starter on the vehicle or equipment.

The key fitment points here are the passenger side Perkins mount note, the 127mm / 90mm mount centre measurements, the 89mm flange diameter and the 310mm overall length. If any of these differ on the unit being replaced, the starter may not bolt up correctly or may not align as expected.

This starter is listed for the M50 Series, but the note also makes clear that side of mount matters. If the application is drivers side rather than passenger side, the listed alternative is DXS569. That is a useful checkpoint for avoiding the wrong unit.

As with any starter replacement, compare the tooth count, pinion size and rotation before purchase. This model is specified as 10 tooth, 40mm pinion diameter, 30mm pinion at rest and CW rotation, which are practical details to verify alongside the physical mounting measurements.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number LXS9302 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Mount Centres A 127mm, Mount Centres C 90mm, Number of Teeth 10, Pinion at Rest 30mm, Power Rating 2.8kW, Suits Unit Make Lucas, Note M50 Series. Passenger side Perkins mount. For drivers side mount use DXS569..

Additional published details for cross-checking include New / Reman. New, Wet / Dry Clutch Dry, Product Group 2 STARTER MOTORS, Part No. LXS9302, Brand OEX, Description OEX Starter Motor 12V 10Th CW Lucas Style, Flange Diameter 89mm, Mount Centres B 90mm, Mount Hole Diameter 10.

OEX Starter Motor 12V 10Th CW Lucas Style. Part number LXS9302 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number LXS9302, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include CASE IH CX, CASE IH MX100C, CASE IH MX80C, CASE IH MX90C, CATERPILLAR 216, CATERPILLAR 226. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Confirm fitment using part number LXS9302, the 12V 10 tooth CW specification, and the passenger side Perkins mount details before ordering. If your application is a drivers side mount, the listed alternative is DXS569.

FAQ

What is the part number for this starter motor?

The part number listed is LXS9302. For this listing, part number LXS9302 is the main reference point. Listed voltage is 12. Published fitment references include CASE IH CX, CASE IH MX100C, CASE IH MX80C. These details should still be checked against the original unit before ordering.

What voltage and rotation does this starter have?

It is a 12V starter motor with clockwise (CW) rotation. For this listing, part number LXS9302 is the main reference point. Listed voltage is 12. Published fitment references include CASE IH CX, CASE IH MX100C, CASE IH MX80C. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

The starter is specified with 10 teeth. For this listing, part number LXS9302 is the main reference point. Listed voltage is 12. Published fitment references include CASE IH CX, CASE IH MX100C, CASE IH MX80C. These details should still be checked against the original unit before ordering.

What mount type is listed for this unit?

It is listed as a 3 hole starter mount with mount centres A of 127mm and B/C of 90mm. For this listing, part number LXS9302 is the main reference point. Listed voltage is 12. Published fitment references include CASE IH CX, CASE IH MX100C, CASE IH MX80C. These details should still be checked against the original unit before ordering.

Is this starter new or remanufactured?

It is listed as new. For this listing, part number LXS9302 is the main reference point. Listed voltage is 12. Published fitment references include CASE IH CX, CASE IH MX100C, CASE IH MX80C. These details should still be checked against the original unit before ordering.

What should I check if my application is on the drivers side?

The note states that for drivers side mount you should use DXS569 instead of this passenger side Perkins mount unit. For this listing, part number LXS9302 is the main reference point. Listed voltage is 12. Published fitment references include CASE IH CX, CASE IH MX100C, CASE IH MX80C. These details should still be checked against the original unit before ordering.