Auto Electrics Aust Starter Motor Repair Kit 24V 12T CW Denso Style STR KIT #9

This Auto Electrics Aust starter motor repair kit is listed as a 24V, 12-tooth, clockwise rotation unit with a Denso-style application and part number STR KIT #9. It is supplied as a new rotating electrical component and is noted for use with Denso units, so matching the part number and key dimensions is important before ordering.

The major identifying measurements are 126mm mount centres A, B and C, a 92mm flange diameter, and a 3-hole starter mount type with 16mm mount hole diameter. The overall length is 450mm, the pinion diameter is 56mm, and the pinion at rest measures 48mm, all of which are useful checks when comparing against a removed starter or an existing part.

This is a substantial starter motor repair kit at 17.0kg, so it is best handled and compared carefully against the vehicle’s original unit rather than selected by appearance alone. The listing also notes a one-year warranty and unit of measure as each, which gives you a clear reference point for ordering and replacement planning.

Key Features

• 24V starter motor repair kit
• 12-tooth pinion
• Clockwise rotation
• Denso style application
• Suitable for Denso units
• New unit

Specifications

• Voltage: 24V
• Number of teeth: 12
• Rotation: CW
• Starter mount type: 3 hole
• Mount centres A: 126mm
• Mount centres B: 126mm
• Mount centres C: 126mm
• Flange diameter: 92mm

Application and Buying Notes

Before buying, check the part number STR KIT #9 against the unit being replaced, then compare the electrical and physical details that are already listed here: 24V, 12 teeth, CW rotation, 3-hole mount, 126mm mount centres, and 92mm flange diameter. Those are the most reliable checkpoints when identifying a starter assembly of this style.

The Denso-style note and the Suits Unit Make entry for Denso are important, but they are not a substitute for a direct match on the starter you have in front of you. Pay close attention to the overall length of 450mm, pinion diameter of 56mm, and pinion at rest of 48mm, because small differences in these dimensions can stop a starter from fitting or engaging correctly.

If you are replacing a failed unit, compare the old starter side by side before installation. A 17.0kg starter is not something to select by general shape alone, and the 16mm mount hole diameter plus 3-hole mount pattern should be checked carefully against the existing housing and mounting points.

This part is sold as a new rotating electrical component and carries a one-year warranty. That does not remove the need to confirm application first, particularly where the vehicle has been altered, the original unit has been changed previously, or the existing starter is not the same Denso-style configuration.

For accurate ordering, use the part number STR KIT #9 together with the voltage, tooth count, rotation direction, and mount measurements. These details matter more than a description alone, especially when matching a starter that is specific to a Denso-style application.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number STR KIT #9 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR REPAIR KIT, Unit of Measure EACH, Warranty One Year, Mount Centres A 126mm, Mount Centres C 126mm, Number of Teeth 12, Pinion at Rest 48mm, Rotation CW, Voltage 24, Starter Mount Type 3 Hole.

Additional published details for cross-checking include Product Group 1 ROTATING ELECTRICAL, Part No. STR KIT #9, Brand AUTO ELECTRICS AUST, Description Starter Motor 24V 12Th CW Denso Style, Flange Diameter 92mm, Mount Centres B 126mm, Mount Hole Diameter 16, Overall Length 450mm, Pinion Diameter 56mm, Suits Unit Make Denso.

Starter Motor 24V 12Th CW Denso Style. Part number STR KIT #9 should be checked first. Listed voltage is 24. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number STR KIT #9, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor repair kit in workshop, fleet, trade, agricultural, or construction service, the listed voltage 24 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Where no verified application list is available, the part number, mounting details, connector style, and published specifications should be used as the primary selection criteria.

In the absence of a verified fitment list, the safest approach is to compare the removed unit directly with the listed product details. That includes checking the housing style, pulley layout, regulator arrangement, and any visible identification numbers before supply is approved.

The listed warranty is One Year. Warranty terms should be considered alongside correct application and part identification, as warranty does not replace fitment confirmation.

Compatibility note: Please confirm compatibility by matching part number STR KIT #9 and the listed application details, including 24V, 12 teeth, CW rotation, Denso style, 3-hole mount, 126mm mount centres, and the 92mm flange diameter before purchase.

FAQ

What is this part number?

The listed part number is STR KIT #9.

What voltage is the starter motor repair kit?

It is listed as 24V.

How many teeth does the pinion have?

The pinion is listed with 12 teeth.

What rotation direction is listed?

The rotation is listed as clockwise, or CW.

What mounting details are provided?

The listing shows a 3-hole starter mount type, 126mm mount centres for A, B and C, a 92mm flange diameter, and a 16mm mount hole diameter.

Is there a warranty listed?

Yes. The warranty listed is one year.