OEX Starter Motor 12V 12T CW Denso Style DXS495

The OEX starter motor DXS495 is a 12V unit with 12 teeth, clockwise rotation and a 2.5kW power rating. It is listed as a new starter motor in Denso style, with a 3 hole starter mount and wet or dry clutch compatibility.

Key dimensions are important on a starter like this. This unit measures 272mm overall length, has 127mm mount centres A, 90mm mount centres B and 90mm mount centres C, with a 89mm flange diameter and 10.5mm mount hole diameter.

The pinion details are also defined clearly: 46mm pinion diameter and 48mm pinion at rest. Those measurements, along with the 12 tooth count and CW rotation, should be matched carefully to the vehicle application before purchase.

Key Features

• 12V starter motor
• 12 tooth pinion
• Clockwise rotation (CW)
• 2.5kW power rating
• Denso style unit
• 3 hole starter mount

Specifications

• Part No.: DXS495
• Brand: OEX
• Product type: Starter Motor
• Voltage: 12V
• Rotation: CW
• Number of teeth: 12
• Power rating: 2.5kW
• Mount type: 3 hole

Known application references

• Allis Chalmers C60
• Allis Chalmers C70
• Allis Chalmers C80
• Bobcat 980
• Bobcat 995
• Bomag BW156D-3
• Ingersoll-Rand DD118HFA
• Ingersoll-Rand DD70

Application and Buying Notes

Before ordering, confirm the starter in your machine matches the DXS495 details: 12V, 12 teeth, CW rotation, 2.5kW output and a 3 hole mount. The physical measurements matter just as much as the electrical rating, especially the 272mm overall length, 127mm mount centres A, 90mm mount centres B and 90mm mount centres C.

The Denso-style listing and the supplied application references point to a starter used across several machines, including Allis Chalmers, Bobcat, Bomag, Ingersoll-Rand, Versatile and Volvo Construction models. That said, the safest check is still the part number and the existing starter’s dimensions, because similar-looking units can differ in flange diameter, mount spacing or pinion position.

If you are replacing a starter that has failed, compare the old unit carefully before fitting this one. Check the pinion at rest measurement of 48mm, pinion diameter of 46mm, mount hole diameter of 10.5mm and the 89mm flange diameter. These are the sorts of details that determine whether the unit will bolt up and engage correctly.

This starter is listed as new and carries a 3yr Passenger / 1yr Commercial warranty. That warranty term is useful for purchasing confidence, but it does not replace application checking. Match the part number DXS495, the OEX brand reference and the Denso-style specification against your vehicle or machine before you place the order.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number DXS495 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Mount Centres A 127mm, Mount Centres C 90mm, Number of Teeth 12, Pinion at Rest 48mm, Power Rating 2.5kW, Suits Unit Make Denso, Item Type Starter Motor.

Additional published details for cross-checking include Starter Mount Type 3 Hole, Weight 8.5kg, Product Group 1 ROTATING ELECTRICAL, Part No. DXS495, Brand OEX, Description OEX Starter Motor 12V 12Th CW Denso Style, Flange Diameter 89mm, Mount Centres B 90mm, Mount Hole Diameter 10.5, Overall Length 272mm.

OEX Starter Motor 12V 12Th CW Denso Style. Part number DXS495 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number DXS495, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include ALLIS CHALMERS C60, ALLIS CHALMERS C60 1982, ALLIS CHALMERS C60 1983, ALLIS CHALMERS C60 1984, BOBCAT 980, BOBCAT 980 1989. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Confirm fitment by matching part number DXS495, 12V voltage, 12 tooth count, CW rotation, Denso style mounting and the measured dimensions against the existing unit and application details before purchase.

FAQ

What is the part number for this starter motor?

The part number is DXS495. For this listing, part number DXS495 is the main reference point. Listed voltage is 12. Published fitment references include ALLIS CHALMERS C60, ALLIS CHALMERS C60 1982, ALLIS CHALMERS C60 1983. These details should still be checked against the original unit before ordering.

Is this a 12V or 24V starter?

It is a 12V starter motor. For this listing, part number DXS495 is the main reference point. Listed voltage is 12. Published fitment references include ALLIS CHALMERS C60, ALLIS CHALMERS C60 1982, ALLIS CHALMERS C60 1983. These details should still be checked against the original unit before ordering.

What rotation does this starter motor have?

It is clockwise rotation (CW). For this listing, part number DXS495 is the main reference point. Listed voltage is 12. Published fitment references include ALLIS CHALMERS C60, ALLIS CHALMERS C60 1982, ALLIS CHALMERS C60 1983. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

The pinion has 12 teeth. For this listing, part number DXS495 is the main reference point. Listed voltage is 12. Published fitment references include ALLIS CHALMERS C60, ALLIS CHALMERS C60 1982, ALLIS CHALMERS C60 1983. These details should still be checked against the original unit before ordering.

Is this a new or remanufactured unit?

It is listed as a new starter motor. For this listing, part number DXS495 is the main reference point. Listed voltage is 12. Published fitment references include ALLIS CHALMERS C60, ALLIS CHALMERS C60 1982, ALLIS CHALMERS C60 1983. These details should still be checked against the original unit before ordering.

What warranty is listed for this starter motor?

The listed warranty is 3yr Passenger / 1yr Commercial. For this listing, part number DXS495 is the main reference point. Listed voltage is 12. Published fitment references include ALLIS CHALMERS C60, ALLIS CHALMERS C60 1982, ALLIS CHALMERS C60 1983. These details should still be checked against the original unit before ordering.