OEX Starter Motor 12V 10 Tooth CW Valeo VXS917

The OEX VXS917 is a 12V starter motor with 10 teeth, clockwise rotation and a 3kW power rating. It is listed as a new unit, with a dry clutch arrangement, a 2 hole starter mount, and a Valeo application. Those details matter when you are matching a replacement starter, especially where the original unit uses the same mount centres, flange size, pinion dimensions and rotation.

Key dimensions for identification are 105mm mount centres, 82mm flange diameter, 12mm mount hole diameter, 340mm overall length, 32mm pinion diameter and 35mm pinion at rest. The starter weighs 8.3kg and is supplied as each. For direct replacement work, the part number VXS917 and the Valeo suit listing are the most useful identifiers to confirm before ordering.

OEX states this starter is made using OE components and sourced from ISO9001 certified factories. It is also covered by a 3 year warranty for passenger use and 1 year for commercial use. While that gives a useful quality and support context, fitment still needs to be checked against the vehicle application, tooth count and physical dimensions before installation.

Key Features

• 12V starter motor
• 10 tooth pinion
• Clockwise rotation
• 3kW power rating
• New unit
• Dry clutch type

Specifications

• Brand: OEX
• Type: Starter Motor
• Voltage: 12V
• Power rating: 3kW
• Rotation: CW
• Number of teeth: 10
• Suits unit make: Valeo
• Starter mount type: 2 hole

Known application references

• ATLAS COPCO XAS375
• ATLAS COPCO XAS375 2010
• CHAMBERLAIN 3380
• CHAMBERLAIN 3380B
• CHAMBERLAIN 4090
• CHAMBERLAIN 4280
• CHAMBERLAIN 4280B
• CHAMBERLAIN 4290

Application and Buying Notes

Before buying, match the part number VXS917 and confirm the starter is a Valeo type with 12V, 10 teeth and clockwise rotation. Those are the core identifiers here, and they should line up with the original unit on the vehicle or machine. If any one of those details differs, the starter may not be the correct replacement.

The physical measurements are just as important as the electrical details. Check the 105mm mount centres, 82mm flange diameter, 12mm mount hole diameter and 340mm overall length against the removed starter. The pinion diameter of 32mm and pinion at rest of 35mm are also useful checks when comparing units that may appear similar at a glance.

This starter is listed as a new OEX unit and is supplied with a dry clutch arrangement. If the original setup was different, the starter should only be used where the vehicle application and the fitted unit details agree. The 3kW power rating and 8.3kg weight also give useful comparison points when you are checking against the removed component.

For buyers working from machine or fleet records, the application list includes ATLAS COPCO XAS375, several CHAMBERLAIN models, JOHN DEERE entries such as 2020, 2030 and 2040, plus KUBOTA S2200 and S2800-A. Use those references as a guide only, and still confirm the dimensions, rotation and tooth count before purchase.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number VXS917 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Mount Centres A 105mm, Number of Teeth 10, Pinion at Rest 35mm, Power Rating 3kW, Suits Unit Make Valeo, Note 10 tooth, 11 tooth and 13 tooth units interchangeable., New / Reman. New.

Additional published details for cross-checking include Wet / Dry Clutch Dry, Product Group 2 STARTER MOTORS, Part No. VXS917, Brand OEX, Description OEX Starter Motor 12V 10Th CW Valeo, Flange Diameter 82mm, Mount Hole Diameter 12, Overall Length 340mm, Pinion Diameter 32mm.

OEX Starter Motor 12V 10Th CW Valeo. Part number VXS917 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number VXS917, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include ATLAS COPCO XAS375, ATLAS COPCO XAS375 2010, CHAMBERLAIN 3380, CHAMBERLAIN 3380B, CHAMBERLAIN 4090, CHAMBERLAIN 4280. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Confirm fitment by matching part number VXS917, 12V, 10 tooth, clockwise rotation, Valeo suit listing, and the physical mounting dimensions before ordering.

FAQ

What is the part number for this starter motor?

The part number listed is VXS917. For this listing, part number VXS917 is the main reference point. Listed voltage is 12. Published fitment references include ATLAS COPCO XAS375, ATLAS COPCO XAS375 2010, CHAMBERLAIN 3380. These details should still be checked against the original unit before ordering.

Is this a 12V starter motor?

Yes. The listed voltage is 12V. For this listing, part number VXS917 is the main reference point. Listed voltage is 12. Published fitment references include ATLAS COPCO XAS375, ATLAS COPCO XAS375 2010, CHAMBERLAIN 3380. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

It is listed with 10 teeth. For this listing, part number VXS917 is the main reference point. Listed voltage is 12. Published fitment references include ATLAS COPCO XAS375, ATLAS COPCO XAS375 2010, CHAMBERLAIN 3380. These details should still be checked against the original unit before ordering.

What rotation does this starter motor have?

The rotation is clockwise, shown as CW. For this listing, part number VXS917 is the main reference point. Listed voltage is 12. Published fitment references include ATLAS COPCO XAS375, ATLAS COPCO XAS375 2010, CHAMBERLAIN 3380. These details should still be checked against the original unit before ordering.

Is this a new or remanufactured unit?

It is listed as a new starter motor. For this listing, part number VXS917 is the main reference point. Listed voltage is 12. Published fitment references include ATLAS COPCO XAS375, ATLAS COPCO XAS375 2010, CHAMBERLAIN 3380. These details should still be checked against the original unit before ordering.

What warranty is listed for this starter motor?

The listed warranty is 3 years for passenger use and 1 year for commercial use. For this listing, part number VXS917 is the main reference point. Listed voltage is 12. Published fitment references include ATLAS COPCO XAS375, ATLAS COPCO XAS375 2010, CHAMBERLAIN 3380. These details should still be checked against the original unit before ordering.