OEX Starter Motor 24V 11T CW Denso Style DXS604

The OEX Starter Motor DXS604 is a new 24V starter motor with 11 teeth, clockwise rotation, and a Denso-style fitment profile. It is listed with a 4.5kW power rating, a 2 hole starter mount, and a dry clutch application, so the key checks are voltage, rotation, tooth count, and mounting dimensions before ordering.

Important dimensions on this unit include a 145mm mount centre spacing, 100mm flange diameter, 14mm mount hole diameter, 288mm overall length, 41mm pinion diameter, and 20mm pinion at rest. Those measurements matter when comparing it to the removed starter, especially on equipment where starter body clearance and bolt pattern need to line up exactly.

This starter is identified as part number DXS604 and is sold as an each unit. OEX lists the warranty as 3yr Passenger and 1yr Commercial, which gives a useful reference point for buyers matching the right starter to the right duty cycle and application type.

Key Features

• 24V starter motor
• 11-tooth pinion
• Clockwise rotation
• Denso style / suits Denso unit make
• 2 hole starter mount
• New unit

Specifications

• Power rating: 4.5kW
• Voltage: 24V
• Number of teeth: 11
• Rotation: CW
• Mount centres A: 145mm
• Starter mount type: 2 hole
• Flange diameter: 100mm
• Mount hole diameter: 14mm

Fitment references supplied for this starter

• BELL HD1023III
• BELL HD820III
• HIDROMEK HMK220LC
• K27 FH-SERIES
• KATO HD1023II
• KATO HD1023II-LC
• KATO HD1023III
• KATO HD1023III-LC

Application and Buying Notes

Before buying, confirm the replacement starter matches the 24V electrical system, the 11-tooth pinion, and clockwise rotation of this unit. The 2 hole mount, 145mm mount centres, 100mm flange diameter, and 14mm mount hole diameter are the practical measurements to compare against the removed starter, because a Denso-style unit can still differ in physical layout.

The 4.5kW power rating is another useful check when replacing a starter on heavier equipment, but it should be matched with the original unit rather than assumed from model name alone. If the old starter is available, compare the part number DXS604, the overall length of 288mm, and the pinion dimensions of 41mm diameter and 20mm at rest to reduce the risk of ordering the wrong unit.

Where fitment listings are broad, confirm the exact application with the machine or vehicle details, not just the brand family. The supplied fitment references span BELL, HIDROMEK, K27, KATO, KOBELCO, MITSUBISHI FUSO, MITSUBISHI INDUSTRIAL, and NEW HOLLAND, so matching the specific model and build details is still important before installation.

This starter is listed as new and intended for dry clutch use, so it should be checked against the original starter and the engine or machine setup it came from. If the application is commercial or off-road equipment, the 1yr Commercial warranty listed here may be the relevant warranty reference, while passenger use is shown separately at 3 years.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number DXS604 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Mount Centres A 145mm, Number of Teeth 11, Pinion at Rest 20mm, Power Rating 4.5kW, Suits Unit Make Denso, Item Type Starter Motor, Starter Mount Type 2 Hole.

Additional published details for cross-checking include Weight 8.5kg, Product Group 1 ROTATING ELECTRICAL, Part No. DXS604, Brand OEX, Description OEX Starter Motor 24V 11Th CW Denso Style, Flange Diameter 100mm, Mount Hole Diameter 14, Overall Length 288mm, Pinion Diameter 41mm, Rotation CW.

OEX Starter Motor 24V 11Th CW Denso Style. Part number DXS604 should be checked first. Listed voltage is 24. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number DXS604, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 24 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include BELL HD1023III, BELL HD1023III 1997, BELL HD820III, BELL HD820III 1995, HIDROMEK HMK220LC, HIDROMEK HMK220LC 2016. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Confirm compatibility by matching part number DXS604, 24V voltage, 11 teeth, clockwise rotation, Denso style application, and the listed mounting and pinion dimensions against the removed starter and the machine application before purchase.

FAQ

What is the part number for this starter motor?

The listed part number is DXS604. For this listing, part number DXS604 is the main reference point. Listed voltage is 24. Published fitment references include BELL HD1023III, BELL HD1023III 1997, BELL HD820III. These details should still be checked against the original unit before ordering.

What voltage does this starter use?

This starter is specified as 24V. For this listing, part number DXS604 is the main reference point. Listed voltage is 24. Published fitment references include BELL HD1023III, BELL HD1023III 1997, BELL HD820III. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

The pinion has 11 teeth. For this listing, part number DXS604 is the main reference point. Listed voltage is 24. Published fitment references include BELL HD1023III, BELL HD1023III 1997, BELL HD820III. These details should still be checked against the original unit before ordering.

What rotation does this starter motor have?

It is clockwise rotation, shown as CW. For this listing, part number DXS604 is the main reference point. Listed voltage is 24. Published fitment references include BELL HD1023III, BELL HD1023III 1997, BELL HD820III. These details should still be checked against the original unit before ordering.

Is this a new or remanufactured starter?

It is listed as new. For this listing, part number DXS604 is the main reference point. Listed voltage is 24. Published fitment references include BELL HD1023III, BELL HD1023III 1997, BELL HD820III. These details should still be checked against the original unit before ordering.

What warranty is listed for this OEX starter motor?

The listed warranty is 3yr Passenger and 1yr Commercial. For this listing, part number DXS604 is the main reference point. Listed voltage is 24. Published fitment references include BELL HD1023III, BELL HD1023III 1997, BELL HD820III. These details should still be checked against the original unit before ordering.