Sanden Air Conditioning Compressor 12V Direct Mount PXE16 CXS1620

This Sanden air conditioning compressor is a 12V direct mount unit in the PXE16 series, supplied as part number CXS1620. It is listed with a 110mm clutch diameter, 6 groove pulley section, vertical pad fitting type, and a weight of 5.6kg.

It is a cooling system component sold each, and the recorded original equipment number is 4573. The unit is marked as a Sanden compressor with no dust cover, so matching the mounting style and connection layout is important before purchase.

Fitment references supplied for this compressor include Audi A3 from 1/04 onward, Skoda Octavia from 1/07 onward, and VW Golf from 1/04 onward. Those references are useful starting points, but the part number and physical specifications should still be checked carefully against the vehicle already in front of you.

Key Features

• 12V air conditioning compressor
• Sanden PXE16 series
• Direct mount compressor
• Vertical pad fitting type
• 110mm clutch diameter
• 6 groove pulley section

Specifications

• Brand: Sanden
• Part No.: CXS1620
• Series: PXE16
• Voltage: 12V
• Compressor mounting: Direct mount
• Fitting type: Vertical pad
• Clutch diameter: 110mm
• Pulley section: 6 groove

Fitment references supplied

• Audi A3 from 1/04 onward
• Skoda Octavia from 1/07 onward
• VW Golf from 1/04 onward

Application and Buying Notes

Before ordering, confirm the compressor on the vehicle matches the key identifiers here: Sanden PXE16 series, CXS1620 part number, 12V electrical system, direct mount arrangement, and vertical pad fitting. These details matter because air conditioning compressors are often similar in appearance while differing in mounting, pulley setup, or connector style.

The pulley section is 6 groove and the clutch diameter is 110mm, so those measurements should be compared with the removed unit where possible. If the replacement compressor has a different pulley configuration or mounting face, it may not suit the application even if the vehicle model is close to one of the listed references.

The recorded vehicle references cover Audi A3 from 1/04, Skoda Octavia from 1/07, and VW Golf from 1/04. Use those as compatibility checkpoints only, then verify against the actual compressor installed on the car. The original equipment number 4573 and part number CXS1620 are the most useful identifiers when checking for a match.

This unit is supplied as a one year warranty item and weighs 5.6kg. When comparing options, make sure the vehicle is configured for a 12V Sanden direct mount compressor and that the fitting layout aligns with the existing air conditioning system. Careful comparison at the vehicle level reduces the chance of ordering the wrong compressor.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number CXS1620 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type AIR CONDITIONING COMPRESSOR, Unit of Measure EACH, Warranty One Year, Compressor Mounting Direct Mount, Original Equipment Number 4573, Series PXE16, Voltage 12, Weight 5.6kg, Product Group 1 COOLING, Part No. CXS1620.

Additional published details for cross-checking include Brand SANDEN, Description Sanden Air Conditioning Compressor 12V Direct Mount PXE16, Clutch Diameter 110mm, Fitting Type Vertical Pad, Pulley Section 6 Groove, Suits Unit Make Sanden, Dust Cover Y/N No, Product Group 2 AC COMPONENTS.

Sanden Air Conditioning Compressor 12V Direct Mount PXE16. Part number CXS1620 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Pulley configuration is 6 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number CXS1620, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a air conditioning compressor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Confirm fitment by matching the part number CXS1620, the PXE16 series, the 12V direct mount layout, and the 110mm 6 groove pulley details against the existing compressor and vehicle application before ordering.

FAQ

What type of compressor is this?

It is a Sanden air conditioning compressor in the PXE16 series, with a 12V rating and direct mount design. For this listing, part number CXS1620 is the main reference point. Listed voltage is 12. Published fitment references include AUDI A1, AUDI A1 2010, AUDI A1 2011. These details should still be checked against the original unit before ordering.

What is the part number?

The listed part number is CXS1620. For this listing, part number CXS1620 is the main reference point. Listed voltage is 12. Published fitment references include AUDI A1, AUDI A1 2010, AUDI A1 2011. These details should still be checked against the original unit before ordering.

What vehicles are referenced for fitment?

The supplied references are Audi A3 from 1/04 onward, Skoda Octavia from 1/07 onward, and VW Golf from 1/04 onward. For this listing, part number CXS1620 is the main reference point. Listed voltage is 12. Published fitment references include AUDI A1, AUDI A1 2010, AUDI A1 2011. These details should still be checked against the original unit before ordering.

What pulley and clutch details are listed?

The compressor has a 110mm clutch diameter and a 6 groove pulley section. For this listing, part number CXS1620 is the main reference point. Listed voltage is 12. Published fitment references include AUDI A1, AUDI A1 2010, AUDI A1 2011. These details should still be checked against the original unit before ordering.

Is a dust cover included?

No. The listed dust cover status is no. For this listing, part number CXS1620 is the main reference point. Listed voltage is 12. Published fitment references include AUDI A1, AUDI A1 2010, AUDI A1 2011. These details should still be checked against the original unit before ordering.

What warranty is provided?

The warranty listed is one year. For this listing, part number CXS1620 is the main reference point. Listed voltage is 12. Published fitment references include AUDI A1, AUDI A1 2010, AUDI A1 2011. These details should still be checked against the original unit before ordering.