OEX Alternator 12V 100A Mitsubishi Style MXA2068

The OEX Alternator MXA2068 is a new 12V, 100A unit built in a Mitsubishi style with a twin leg alternator mount. It suits Mitsubishi applications and uses an internal regulator, with a 6 groove pulley and a pulley outside diameter of 55mm.

This alternator is listed with a 156mm mount centre-to-centre measurement, 58mm inside mounting legs, and 8.5mm pivot and adjusting hole diameters. Those dimensions are the key checkpoints when comparing it to the unit being replaced.

OEX classifies this alternator in its rotating electrical range, with a 3 year passenger and 1 year commercial warranty. The unit weighs 6.8kg and carries part number MXA2068, which should be matched carefully before purchase.

Key Features

• New OEX alternator
• 12V, 100A output
• Mitsubishi style unit
• Internal regulator
• 6 groove pulley
• Twin leg mounting

Specifications

• Brand: OEX
• Product type: Alternator
• Voltage: 12V
• Power rating: 100A
• Part number: MXA2068
• Suits unit make: Mitsubishi
• Regulator type: Internal
• Alternator mount: Twin leg

Verified fitment

• Nissan Micra
• Nissan Micra 2010
• Nissan Micra 2011
• Nissan Micra 2012
• Nissan Micra 2013
• Nissan Micra 2014
• Nissan Micra 2015
• Nissan Micra 2016

Application and Buying Notes

Before ordering, compare the replacement alternator against part number MXA2068 and check the mounting style, especially the twin leg mount, 58mm inside mounting legs, and 156mm mount centre-to-centre measurement. These are the most practical checks for confirming that the physical shape matches the unit you are removing.

The electrical details also matter. This alternator is 12V and rated at 100A, with an internal regulator and a 6 groove pulley measuring 55mm outside diameter. If your vehicle uses a different voltage, regulator setup, or pulley style, the part will not be a direct match.

For fitment listed against Nissan Micra applications, confirm the vehicle against the existing unit and part number rather than relying on model name alone. Alternators can vary within the same model range, so the safest check is a side-by-side comparison of the old alternator, the mounting points, and the pulley arrangement.

Because this is a new OEX alternator, it is suitable where a direct replacement is needed, but the correct application still depends on matching the unit make, dimensions, and connector arrangement on the vehicle. The 8.5mm pivot and adjusting holes are useful confirmation points during comparison.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number MXA2068 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Inside Mounting Legs 58mm, Pivot Hole Diameter 8.5 / M8, Pulley Outside Diameter 55mm, Regulator Type Internal, Voltage 12, Mount Cnt to Cnt 156mm, Weight 6.8kg.

Additional published details for cross-checking include Product Group 1 ROTATING ELECTRICAL, Part No. MXA2068, Brand OEX, Description OEX Alternator 12V 100A Mitsubishi Style, Adjusting Hole Diameter 8.5, Pin Code IR50, Power Rating (Amp) 100, Pulley Section 6 Groove, Suits Unit Make Mitsubishi, Alternator Mount Twin Leg.

OEX Alternator 12V 100A Mitsubishi Style. Part number MXA2068 should be checked first. Listed voltage is 12. Listed output rating is 100. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Twin Leg. Regulator type is Internal. Pulley configuration is 6 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number MXA2068, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 100 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Confirm compatibility by matching part number MXA2068, the Mitsubishi style twin leg mounting, and the listed dimensions before purchase. Vehicle fitment should always be checked against the existing unit and application details.

FAQ

What is the part number for this alternator?

The part number is MXA2068. For this listing, part number MXA2068 is the main reference point. Listed voltage is 12. Listed output rating is 100. Published fitment references include NISSAN MICRA, NISSAN MICRA 2010, NISSAN MICRA 2011. These details should still be checked against the original unit before ordering.

What voltage and output does it have?

It is a 12V alternator with a 100A power rating. For this listing, part number MXA2068 is the main reference point. Listed voltage is 12. Listed output rating is 100. Published fitment references include NISSAN MICRA, NISSAN MICRA 2010, NISSAN MICRA 2011. These details should still be checked against the original unit before ordering.

Is this alternator new or remanufactured?

It is listed as new. For this listing, part number MXA2068 is the main reference point. Listed voltage is 12. Listed output rating is 100. Published fitment references include NISSAN MICRA, NISSAN MICRA 2010, NISSAN MICRA 2011. These details should still be checked against the original unit before ordering.

What type of regulator does it use?

It has an internal regulator. For this listing, part number MXA2068 is the main reference point. Listed voltage is 12. Listed output rating is 100. Published fitment references include NISSAN MICRA, NISSAN MICRA 2010, NISSAN MICRA 2011. These details should still be checked against the original unit before ordering.

What pulley setup does it use?

It has a 6 groove pulley with a 55mm outside diameter. For this listing, part number MXA2068 is the main reference point. Listed voltage is 12. Listed output rating is 100. Published fitment references include NISSAN MICRA, NISSAN MICRA 2010, NISSAN MICRA 2011. These details should still be checked against the original unit before ordering.

What warranty is listed?

The listed warranty is 3 years for passenger use and 1 year for commercial use. For this listing, part number MXA2068 is the main reference point. Listed voltage is 12. Listed output rating is 100. Published fitment references include NISSAN MICRA, NISSAN MICRA 2010, NISSAN MICRA 2011. These details should still be checked against the original unit before ordering.