OEX Alternator 12V 130A Mitsubishi Style MXA2070

The OEX Alternator MXA2070 is a 12V, 130A unit in Mitsubishi style with a twin leg alternator mount and internal regulator. It is supplied new, not remanufactured, and the listed pulley is a 7 groove design with a 55mm outside diameter. These details matter when you are matching an alternator to the vehicle’s belt, bracket and charging system requirements.

For installation and identification, key measurements include 72mm inside mounting legs, a 10.5mm pivot hole diameter and an M8 x 1.25 adjusting hole diameter. The unit is listed at 6.5kg and uses pin code IR50. If you are replacing an existing alternator, these physical and electrical details should be checked against the removed unit before ordering.

OEX positions this alternator range around quality and reliability at aftermarket pricing, with factories stated as ISO9001 certified. The unit carries a 3 year passenger / 1 year commercial warranty, so it is intended for buyers who want a new replacement alternator with clear technical identifiers and known mounting dimensions.

Key Features

• 12V, 130A alternator
• Mitsubishi style unit
• New alternator, not remanufactured
• Internal regulator
• Twin leg alternator mount
• 7 groove pulley

Specifications

• Brand: OEX
• Part number: MXA2070
• Product type: Alternator
• Power rating: 130 amp
• Voltage: 12V
• Suits unit make: Mitsubishi
• Alternator mount: Twin leg
• Inside mounting legs: 72mm

Fitment guidance

• NISSAN: ALTIMA, ALTIMA 2013, ALTIMA 2014, ALTIMA 2015, ALTIMA 2016, plus other listed applications

Application and Buying Notes

Before ordering, confirm the part number MXA2070 and compare the mounting layout on your existing unit. The critical fitment points here are the twin leg alternator mount, 72mm inside mounting legs, 10.5mm pivot hole diameter and M8 x 1.25 adjusting hole diameter. If any of those dimensions differ from the alternator being removed, the unit should not be assumed to fit.

Belt alignment is just as important as the mounting points. This alternator is listed with a 55mm outside diameter pulley and a 7 groove pulley section, so the belt profile on the vehicle must match. The regulator is internal, so the charging system arrangement should also be checked against the original unit before fitting.

The product is described as Mitsubishi style and suits unit make Mitsubishi, which helps narrow the style and construction, but it does not by itself confirm vehicle application. Always compare the removed alternator, the vehicle’s belt drive and the listed measurements before purchase. The 130A output is the rated charging capacity, so it should be selected with the vehicle’s electrical setup in mind rather than on appearance alone.

If the vehicle is used commercially, the warranty difference matters: 3 years for passenger use and 1 year for commercial use. That makes the intended application worth confirming at the time of purchase. The unit is new and weighs 6.5kg, so handling and installation should be planned accordingly.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number MXA2070 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Inside Mounting Legs 72mm, Pivot Hole Diameter 10.5, Pulley Outside Diameter 55mm, Regulator Type Internal, Voltage 12, New / Reman. New.

Additional published details for cross-checking include Product Group 2 ALTERNATORS, Part No. MXA2070, Brand OEX, Description OEX Alternator 12V 130A Mitsubishi Style, Adjusting Hole Diameter M8 x 1.25, Pin Code IR50, Power Rating (Amp) 130, Pulley Section 7 Groove, Suits Unit Make Mitsubishi, Alternator Mount Twin Leg.

OEX Alternator 12V 130A Mitsubishi Style. Part number MXA2070 should be checked first. Listed voltage is 12. Listed output rating is 130. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Twin Leg. Regulator type is Internal. Pulley configuration is 7 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number MXA2070, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 130 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Confirm fitment by matching part number MXA2070, the Mitsubishi style designation, and all listed mounting and pulley dimensions against the vehicle and the removed alternator before buying.

FAQ

What is the part number for this alternator?

The part number listed is MXA2070. For this listing, part number MXA2070 is the main reference point. Listed voltage is 12. Listed output rating is 130. Published fitment references include NISSAN ALTIMA, NISSAN ALTIMA 2013, NISSAN ALTIMA 2014. These details should still be checked against the original unit before ordering.

Is this alternator new or remanufactured?

It is listed as new. For this listing, part number MXA2070 is the main reference point. Listed voltage is 12. Listed output rating is 130. Published fitment references include NISSAN ALTIMA, NISSAN ALTIMA 2013, NISSAN ALTIMA 2014. These details should still be checked against the original unit before ordering.

What is the output rating?

The alternator is rated at 130 amp and 12V. For this listing, part number MXA2070 is the main reference point. Listed voltage is 12. Listed output rating is 130. Published fitment references include NISSAN ALTIMA, NISSAN ALTIMA 2013, NISSAN ALTIMA 2014. These details should still be checked against the original unit before ordering.

What pulley setup does it use?

It has a 7 groove pulley with a 55mm outside diameter. For this listing, part number MXA2070 is the main reference point. Listed voltage is 12. Listed output rating is 130. Published fitment references include NISSAN ALTIMA, NISSAN ALTIMA 2013, NISSAN ALTIMA 2014. These details should still be checked against the original unit before ordering.

What mounting details should be checked before ordering?

Check the twin leg alternator mount, 72mm inside mounting legs, 10.5mm pivot hole diameter and M8 x 1.25 adjusting hole diameter. For this listing, part number MXA2070 is the main reference point. Listed voltage is 12. Listed output rating is 130. Published fitment references include NISSAN ALTIMA, NISSAN ALTIMA 2013, NISSAN ALTIMA 2014. These details should still be checked against the original unit before ordering.

What warranty is listed?

The listed warranty is 3 years for passenger use and 1 year for commercial use. For this listing, part number MXA2070 is the main reference point. Listed voltage is 12. Listed output rating is 130. Published fitment references include NISSAN ALTIMA, NISSAN ALTIMA 2013, NISSAN ALTIMA 2014. These details should still be checked against the original unit before ordering.