HCC Air Conditioning Compressor 12V Direct Mount VS14 CXH081

The HCC Air Conditioning Compressor 12V Direct Mount VS14 is a replacement air conditioning compressor from HANON SYSTEM, listed under part number CXH081 and original equipment number 97701-A5200. It is a direct mount unit with a pad fitting type, 5 groove pulley section, and 119mm clutch diameter, so matching the mounting style and pulley setup is an important check before ordering.

This compressor is specified at 12 volts and suits Halla unit make applications. The listed oil capacity is 110cc and the noted oil type is FD46XG. Weight is shown as 6kg, and the unit is supplied as each, which is useful when comparing against the existing compressor on the vehicle.

The only explicit vehicle application provided is Hyundai i30 GD 1.6L turbo diesel from 05/2012 to 12/2014. If your vehicle is outside that range, or if the existing compressor details differ, confirm the part number, mounting style, and pulley configuration before proceeding. Climate control parts are best matched carefully, especially when the compressor has direct mount construction and model-specific fitment.

Key Features

• HANON SYSTEM HCC air conditioning compressor
• 12V direct mount VS14 series
• Part number CXH081
• Original equipment number 97701-A5200
• Pad fitting type
• 5 groove pulley section

Specifications

• Type: Air conditioning compressor
• Brand: HANON SYSTEM
• Series: VS14
• Voltage: 12V
• Compressor mounting: Direct mount
• Fitting type: Pad
• Pulley section: 5 groove
• Clutch diameter: 119mm

Verified fitment

• Hyundai i30 GD 1.6L turbo diesel
• Build range: 05/2012 to 12/2014

Application and Buying Notes

Before ordering, compare the compressor on the vehicle with the key identifiers here: CXH081, 97701-A5200, VS14 series, 12V, direct mount, pad fitting, and 5 groove pulley. These details matter because A/C compressors can vary even within the same model range, and the wrong mount or pulley arrangement can prevent correct installation.

The listed application is limited to Hyundai i30 GD 1.6L turbo diesel from 05/2012 to 12/2014. If the vehicle has been repaired previously, or if the air conditioning system has been modified, check the existing unit and the vehicle identification details rather than relying on model name alone. The compressor is specified for Halla unit make applications, which is another useful compatibility checkpoint.

Oil capacity is listed as 110cc with FD46XG oil type. That does not remove the need to confirm system requirements during installation, but it does provide a practical reference when comparing against the replacement unit and the vehicle service information. As with any climate control component, correct fitment and correct handling are more important than appearance alone.

The unit weighs 6kg and is sold individually. If you are replacing a failed compressor, it is sensible to inspect the mounting points, belt alignment, and surrounding components at the same time. A direct mount compressor with a 119mm clutch diameter should be matched carefully to avoid unnecessary rework or parts mismatch.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number CXH081 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type AIR CONDITIONING COMPRESSOR, Unit of Measure EACH, Warranty One Year, Compressor Mounting Direct Mount, Original Equipment Number 97701-A5200, Series VS14, Voltage 12, Oil Capacity 110cc, Weight 6kg, Product Group 1 COOLING.

Additional published details for cross-checking include Part No. CXH081, Brand HANON SYSTEM, Description HCC Air Conditioning Compressor 12V Direct Mount VS14, Clutch Diameter 119mm, Fitting Type Pad, Pulley Section 5 Groove, Suits Unit Make Halla, Note Oil type: FD46XG, Dust Cover Y/N No.

HCC Air Conditioning Compressor 12V Direct Mount VS14. Part number CXH081 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Pulley configuration is 5 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number CXH081, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a air conditioning compressor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Please confirm fitment using part number CXH081, original equipment number 97701-A5200, and the listed Hyundai i30 GD 1.6L turbo diesel application from 05/2012 to 12/2014 before purchase.

FAQ

What is the part number for this compressor?

The listed part number is CXH081. For this listing, part number CXH081 is the main reference point. Listed voltage is 12. Published fitment references include HYUNDAI I30, HYUNDAI I30 2011, HYUNDAI I30 2012. These details should still be checked against the original unit before ordering.

What original equipment number is associated with this compressor?

The original equipment number listed is 97701-A5200. For this listing, part number CXH081 is the main reference point. Listed voltage is 12. Published fitment references include HYUNDAI I30, HYUNDAI I30 2011, HYUNDAI I30 2012. These details should still be checked against the original unit before ordering.

What vehicle application is explicitly listed?

Hyundai i30 GD 1.6L turbo diesel from 05/2012 to 12/2014 is the only explicit vehicle application provided. For this listing, part number CXH081 is the main reference point. Listed voltage is 12. Published fitment references include HYUNDAI I30, HYUNDAI I30 2011, HYUNDAI I30 2012. These details should still be checked against the original unit before ordering.

What are the main mounting and pulley details?

It is a direct mount compressor with a pad fitting type, 5 groove pulley section, and a 119mm clutch diameter. For this listing, part number CXH081 is the main reference point. Listed voltage is 12. Published fitment references include HYUNDAI I30, HYUNDAI I30 2011, HYUNDAI I30 2012. These details should still be checked against the original unit before ordering.

What oil information is provided?

The listed oil capacity is 110cc and the noted oil type is FD46XG. For this listing, part number CXH081 is the main reference point. Listed voltage is 12. Published fitment references include HYUNDAI I30, HYUNDAI I30 2011, HYUNDAI I30 2012. These details should still be checked against the original unit before ordering.

Is a warranty stated?

Yes. The listed warranty is one year. For this listing, part number CXH081 is the main reference point. Listed voltage is 12. Published fitment references include HYUNDAI I30, HYUNDAI I30 2011, HYUNDAI I30 2012. These details should still be checked against the original unit before ordering.