OEX Starter Motor 12V 9TH CW Denso Style DXS4032

The OEX Starter Motor DXS4032 is a new 12V starter motor with a 9-tooth pinion, clockwise rotation and a Denso-style configuration. It is rated at 1kW and uses a 2-hole starter mount with 115mm mount centres, which are the key checks to make before ordering.

This unit has a 74mm flange diameter, 51mm nose cone length and an overall length of 212mm. The pinion sits at 19mm at rest, with a 29mm pinion diameter and M10 x 1.25 mount hole diameter. These measurements matter when matching the starter to the vehicle application and mounting arrangement.

OEX lists this starter as a new unit for dry clutch applications, with the part number DXS4032. It is described as Denso style and suits Denso units, so the physical dimensions and mounting pattern should be matched carefully to the existing starter before purchase.

Key Features

• 12V starter motor
• 9-tooth pinion
• Clockwise rotation (CW)
• 1kW power rating
• 2-hole starter mount
• New unit

Specifications

• Brand: OEX
• Part No.: DXS4032
• Product type: Starter motor
• Voltage: 12V
• Power rating: 1kW
• Rotation: CW
• Number of teeth: 9
• Starter mount type: 2 hole

Fitment guidance

• Listed fitment references include Lexus and Lexus IS applications.
• Sample applications supplied include Lexus IS 1999, 2000, 2001, 2002, 2003, 2004 and 2005.
• Fitment should still be checked against the part number, mounting pattern and dimensions before ordering.

Application and Buying Notes

Before buying, compare the part number DXS4032 with the starter already fitted to the vehicle, then check the 12V electrical system, 9-tooth pinion, CW rotation and 2-hole mount arrangement. The 115mm mount centres, 74mm flange diameter and 212mm overall length are practical checks that help confirm whether the replacement matches the original setup.

The Denso-style design and the note that this unit suits Denso units make the existing starter a useful reference point, but they do not remove the need to measure up. The M10 x 1.25 mount hole diameter, 51mm nose cone length and 19mm pinion at rest are all helpful when confirming the housing and mounting match.

OEX states the product is sourced from market leading original equipment manufacturers and aftermarket suppliers, and from ISO certified factories. The warranty listed is 3 years for passenger use and 1 year for commercial use, so it is still important to confirm the intended application before fitting and to keep purchase details for reference.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number DXS4032 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Mount Centres A 115mm, Mount Hole Diameter M10 x 1.25, Number of Teeth 9, Pinion at Rest 19mm, Power Rating 1kW, Suits Unit Make Denso, New / Reman. New.

Additional published details for cross-checking include Wet / Dry Clutch Dry, Product Group 2 STARTER MOTORS, Part No. DXS4032, Brand OEX, Description OEX Starter Motor 12V 9Th CW Denso Style, Flange Diameter 74mm, Mount Centres B 115mm, Nose Cone Length 51mm, Overall Length 212mm.

OEX Starter Motor 12V 9Th CW Denso Style. Part number DXS4032 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number DXS4032, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include LEXUS IS, LEXUS IS 1999, LEXUS IS 2000, LEXUS IS 2001. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

The listed warranty is 3yr Passenger 1yr Commercial. Warranty terms should be considered alongside correct application and part identification, as warranty does not replace fitment confirmation.

Compatibility note: Confirm compatibility by matching part number DXS4032, the Denso-style application details, and the listed dimensions and mounting pattern to the existing starter before ordering.

FAQ

What is the part number for this starter motor?

The part number listed is DXS4032. For this listing, part number DXS4032 is the main reference point. Listed voltage is 12. Published fitment references include LEXUS IS, LEXUS IS 1999, LEXUS IS 2000. These details should still be checked against the original unit before ordering.

Is this starter motor new or remanufactured?

It is listed as a new starter motor. For this listing, part number DXS4032 is the main reference point. Listed voltage is 12. Published fitment references include LEXUS IS, LEXUS IS 1999, LEXUS IS 2000. These details should still be checked against the original unit before ordering.

What voltage is this starter motor?

It is a 12V starter motor. For this listing, part number DXS4032 is the main reference point. Listed voltage is 12. Published fitment references include LEXUS IS, LEXUS IS 1999, LEXUS IS 2000. These details should still be checked against the original unit before ordering.

What rotation does this starter motor use?

It is clockwise rotation, shown as CW. For this listing, part number DXS4032 is the main reference point. Listed voltage is 12. Published fitment references include LEXUS IS, LEXUS IS 1999, LEXUS IS 2000. These details should still be checked against the original unit before ordering.

What are the main mounting details?

It uses a 2-hole starter mount with 115mm mount centres, M10 x 1.25 mount hole diameter, a 74mm flange diameter and a 51mm nose cone length. For this listing, part number DXS4032 is the main reference point. Listed voltage is 12. Published fitment references include LEXUS IS, LEXUS IS 1999, LEXUS IS 2000. These details should still be checked against the original unit before ordering.

What fitment information is supplied?

Fitment references include Lexus and Lexus IS applications, with sample applications listed for Lexus IS 1999 through 2005. Final fitment should still be checked against the part number and measurements. For this listing, part number DXS4032 is the main reference point. Listed voltage is 12. Published fitment references include LEXUS IS, LEXUS IS 1999, LEXUS IS 2000. These details should still be checked against the original unit before ordering.