OEX Alternator 12V 150A Valeo DXA600

The OEX Alternator DXA600 is a 12V, 150A unit suited to Valeo applications and supplied as a new alternator, not a remanufactured unit. It uses an internal regulator, a 6 groove pulley, and a pad-style alternator mount, which are the key details to check against the original unit before ordering.

This alternator carries a part number of DXA600, with a mount centres B measurement of 59mm, an adjusting hole diameter of 10mm, and a mount leg thickness of 52mm. Those dimensions matter when comparing the replacement against the vehicle’s existing alternator and mounting arrangement.

At 6.5kg, this is a substantial rotating electrical component built around a 12V system and a 150 amp output. The listed pin code is IR212, and the pulley outside diameter is 57mm, so it is important to match the electrical and physical details as well as the part number when confirming suitability.

Key Features

• OEX alternator, part number DXA600
• 12V charging system
• 150 amp power rating
• New unit, not remanufactured
• Internal regulator
• 6 groove pulley

Specifications

• Brand: OEX
• Product type: Alternator
• Part number: DXA600
• Voltage: 12V
• Power rating: 150A
• Unit condition: New
• Regulator type: Internal
• Pulley section: 6 groove

Fitment guidance

• Listed for Holden Captiva 7 applications
• Fitment preview includes Holden Captiva 7 2011 through 2018
• Confirm the original alternator details against part number DXA600 before purchase

Application and Buying Notes

Before ordering, check the original alternator against the key identifiers here: DXA600, 12V, 150A, Valeo, IR212, and the pad mount layout. The physical measurements are just as important as the electrical rating, especially the 59mm mount centres B, 10mm adjusting hole diameter, 52mm mount leg thickness, and 57mm pulley outside diameter.

This alternator is a new OEX unit with an internal regulator, so it is not the same as a remanufactured replacement. That distinction matters when a buyer is comparing condition, expected appearance, and installation requirements. If the vehicle originally uses a Valeo alternator with matching mount and pulley details, that is the strongest starting point for checking suitability.

The 6 groove pulley and IR212 pin code should also be matched carefully. Even where a vehicle is shown in fitment data, alternators can differ by charging output, connector arrangement, mounting style, and pulley configuration. A visual comparison with the old unit remains one of the most reliable checks before fitting.

The warranty listed is 3 years for passenger use and 1 year for commercial use. That provides a clear commercial context, but it does not replace the need to verify compatibility. If the vehicle has been modified, or if the existing alternator has a different pulley, connector, or mounting arrangement, the part should be checked again before purchase.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number DXA600 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Mount Centres B 59mm, Pin Code IR212, Pulley Outside Diameter 57mm, Regulator Type Internal, Voltage 12, New / Reman. New.

Additional published details for cross-checking include Product Group 2 ALTERNATORS, Part No. DXA600, Brand OEX, Description OEX Alternator 12V 150A Valeo, Adjusting Hole Diameter 10, Mount Leg Thickness 52mm, Power Rating (Amp) 150, Pulley Section 6 Groove, Suits Unit Make Valeo, Alternator Mount Pad.

OEX Alternator 12V 150A Valeo. Part number DXA600 should be checked first. Listed voltage is 12. Listed output rating is 150. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Pad. Regulator type is Internal. Pulley configuration is 6 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number DXA600, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 150 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Confirm compatibility using part number DXA600, the Valeo application, and the listed mount, pulley, and connector details before ordering. Vehicle fitment should always be checked against the original alternator and application information.

FAQ

What vehicle application is shown for this alternator?

The fitment information provided shows Holden Captiva 7 applications, with a preview covering model years 2011 through 2018. For this listing, part number DXA600 is the main reference point. Listed voltage is 12. Listed output rating is 150. Published fitment references include HOLDEN CAPTIVA 7, HOLDEN CAPTIVA 7 2011, HOLDEN CAPTIVA 7 2012. These details should still be checked against the original unit before ordering.

What is the part number for this alternator?

The listed part number is DXA600. For this listing, part number DXA600 is the main reference point. Listed voltage is 12. Listed output rating is 150. Published fitment references include HOLDEN CAPTIVA 7, HOLDEN CAPTIVA 7 2011, HOLDEN CAPTIVA 7 2012. These details should still be checked against the original unit before ordering.

Is this alternator new or remanufactured?

This is a new alternator. For this listing, part number DXA600 is the main reference point. Listed voltage is 12. Listed output rating is 150. Published fitment references include HOLDEN CAPTIVA 7, HOLDEN CAPTIVA 7 2011, HOLDEN CAPTIVA 7 2012. These details should still be checked against the original unit before ordering.

What are the main electrical specifications?

It is a 12V alternator with a 150A power rating and an internal regulator. For this listing, part number DXA600 is the main reference point. Listed voltage is 12. Listed output rating is 150. Published fitment references include HOLDEN CAPTIVA 7, HOLDEN CAPTIVA 7 2011, HOLDEN CAPTIVA 7 2012. These details should still be checked against the original unit before ordering.

What pulley and mounting details are listed?

The alternator has a 6 groove pulley, a 57mm pulley outside diameter, a pad mount, 59mm mount centres B, a 10mm adjusting hole diameter, and 52mm mount leg thickness. For this listing, part number DXA600 is the main reference point. Listed voltage is 12. Listed output rating is 150. Published fitment references include HOLDEN CAPTIVA 7, HOLDEN CAPTIVA 7 2011, HOLDEN CAPTIVA 7 2012. These details should still be checked against the original unit before ordering.

What warranty is listed for this product?

The warranty is 3 years for passenger use and 1 year for commercial use. For this listing, part number DXA600 is the main reference point. Listed voltage is 12. Listed output rating is 150. Published fitment references include HOLDEN CAPTIVA 7, HOLDEN CAPTIVA 7 2011, HOLDEN CAPTIVA 7 2012. These details should still be checked against the original unit before ordering.