OEX Alternator 12V 150A Bosch Style BXA067

The OEX BXA067 is a new 12V alternator rated at 150A, built in a Bosch style configuration for vehicles that match the listed mounting and pulley details. Key identifiers to confirm are the part number BXA067, Pin Code IR216, quad leg alternator mount, and 7 groove pulley with a 49mm outside diameter.

This unit uses an internal regulator and has a mount centre to centre measurement of 127mm, with inside mounting legs measuring 60mm. Those dimensions matter when comparing against the existing alternator, as Bosch style units can vary in housing layout even where the electrical rating is the same.

OEX positions this alternator range as an aftermarket replacement option backed by a 3 year passenger and 1 year commercial warranty. For a correct match, the practical checks are the 12V system voltage, 150A output, Bosch unit make, and the physical fitment points already listed for this model.

Key Features

• New alternator
• 12V system voltage
• 150A output
• Bosch style unit
• Internal regulator
• 7 groove pulley

Specifications

• Brand: OEX
• Product type: Alternator
• Part No.: BXA067
• Voltage: 12
• Power rating: 150A
• Regulator type: Internal
• Suits unit make: Bosch
• Alternator mount: Quad leg

Confirmed fitment references

• Mitsubishi Express
• Nissan Qashqai
• Nissan X-Trail
• Renault Trafic

Application and Buying Notes

Before ordering, compare the part number BXA067, the Bosch style design, and the physical mounting details on your existing alternator. The important measurements here are the 127mm mount centre to centre distance, 60mm inside mounting legs, and the quad leg mounting arrangement, as these are the checks most likely to separate a correct replacement from a near match.

The electrical side also needs to line up with the vehicle’s charging system. This unit is rated at 12V and 150A, and it uses an internal regulator. If your original alternator has a different voltage, different amperage output, or a different regulator arrangement, it is not a safe assumption that the units are interchangeable.

The pulley configuration should also be checked closely. This alternator uses a 7 groove pulley with a 49mm outside diameter. Pulley section, offset, and diameter affect belt alignment and drive compatibility, so the existing belt and pulley setup should be compared before purchase.

Fitment references supplied for this part include Mitsubishi Express, Nissan Qashqai, Nissan X-Trail, and Renault Trafic. Those names are useful starting points, but final confirmation still comes down to the exact application details, the unit make being Bosch, and whether the physical dimensions match the alternator already fitted to the vehicle.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number BXA067 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Pin Code IR216, Pulley Outside Diameter 49mm, Regulator Type Internal, Voltage 12, Mount Cnt to Cnt 127mm, Weight 6.48kg, Product Group 1 ROTATING ELECTRICAL.

Additional published details for cross-checking include Part No. BXA067, Brand OEX, Description OEX Alternator 12V 150A Bosch Style, Inside Mounting Legs 60mm, Power Rating (Amp) 150, Pulley Section 7 Groove, Suits Unit Make Bosch, Alternator Mount Quad Leg, New / Reman. New.

OEX Alternator 12V 150A Bosch Style. Part number BXA067 should be checked first. Listed voltage is 12. Listed output rating is 150. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Quad Leg. Regulator type is Internal. Pulley configuration is 7 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number BXA067, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 150 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Confirm fitment by matching the part number BXA067, the Bosch style application, the 12V 150A rating, and the listed mount and pulley dimensions against the existing unit before ordering.

FAQ

Is this alternator new or remanufactured?

This OEX alternator is listed as new, not remanufactured. For this listing, part number BXA067 is the main reference point. Listed voltage is 12. Listed output rating is 150. Published fitment references include MITSUBISHI EXPRESS, MITSUBISHI EXPRESS 2020, NISSAN QASHQAI. These details should still be checked against the original unit before ordering.

What is the voltage and output rating?

It is a 12V alternator rated at 150A. For this listing, part number BXA067 is the main reference point. Listed voltage is 12. Listed output rating is 150. Published fitment references include MITSUBISHI EXPRESS, MITSUBISHI EXPRESS 2020, NISSAN QASHQAI. These details should still be checked against the original unit before ordering.

What type of regulator does it use?

This unit uses an internal regulator. For this listing, part number BXA067 is the main reference point. Listed voltage is 12. Listed output rating is 150. Published fitment references include MITSUBISHI EXPRESS, MITSUBISHI EXPRESS 2020, NISSAN QASHQAI. These details should still be checked against the original unit before ordering.

What mounting style does it have?

It is listed as a quad leg alternator mount with 127mm mount centre to centre and 60mm inside mounting legs. For this listing, part number BXA067 is the main reference point. Listed voltage is 12. Listed output rating is 150. Published fitment references include MITSUBISHI EXPRESS, MITSUBISHI EXPRESS 2020, NISSAN QASHQAI. These details should still be checked against the original unit before ordering.

What pulley specification should I check?

The pulley is a 7 groove design with a 49mm outside diameter. For this listing, part number BXA067 is the main reference point. Listed voltage is 12. Listed output rating is 150. Published fitment references include MITSUBISHI EXPRESS, MITSUBISHI EXPRESS 2020, NISSAN QASHQAI. These details should still be checked against the original unit before ordering.

Which vehicles are referenced for fitment?

The supplied fitment references include Mitsubishi Express, Nissan Qashqai, Nissan X-Trail, and Renault Trafic. Final fitment should still be confirmed against the part number and matching alternator details. For this listing, part number BXA067 is the main reference point. Listed voltage is 12. Listed output rating is 150. Published fitment references include MITSUBISHI EXPRESS, MITSUBISHI EXPRESS 2020, NISSAN QASHQAI. These details should still be checked against the original unit before ordering.