OEX Starter Motor 12V 9TH CW Delco Style DXS506

The OEX Starter Motor DXS506 is a new 12V starter motor with 9 teeth, clockwise rotation, and a Delco unit make. It is listed with a 1.2kW power rating, 2 hole starter mount type, 75mm flange diameter, and a 94mm mount centres measurement, which are all important checks when matching a replacement starter.

This unit is described as a Delco style starter motor and measures 210mm overall length with a 65mm nose cone length. The pinion diameter is 25mm, the pinion at rest is 29mm, and the mount hole diameter is 11.5mm. Those dimensions matter when confirming physical clearance and mounting style before ordering.

OEX backs the product with a 3 year passenger warranty and 1 year commercial warranty. It is supplied as a single each item and weighs 2.9kg, which can be useful when comparing against the removed starter or confirming handling and installation expectations.

Key Features

• 12V starter motor
• 9 tooth pinion
• Clockwise rotation
• Delco unit make
• 2 hole starter mount
• New unit

Specifications

• Part No.: DXS506
• Brand: OEX
• Product type: Starter Motor
• Voltage: 12V
• Rotation: CW
• Number of teeth: 9
• Power rating: 1.2kW
• Suits unit make: Delco

Fitment guidance

• Holden Captiva 5 applications are listed in the supplied fitment data, including 2011, 2012, 2013, 2014 and 2015 models.
• Holden Captiva 7 applications are listed in the supplied fitment data, including 2011, 2012, 2013, 2014 and 2015 models.
• Fitment is shown against Holden and Holden Captiva 5 / Holden Captiva 7 listings only; confirm the exact application with the part number and starter measurements before ordering.

Application and Buying Notes

For this starter, the most useful checks are the part number DXS506, the 12V rating, the 9 tooth pinion, and the clockwise rotation. If any of those do not match the vehicle or the removed unit, stop and compare again before buying. The Delco unit make is also a key identifier for matching the correct replacement style.

Physical measurements are just as important on a starter motor. This unit has a 94mm mount centres measurement, 75mm flange diameter, 11.5mm mount hole diameter, 210mm overall length, and 65mm nose cone length. The pinion diameter is 25mm and the pinion at rest is 29mm, so these dimensions should be checked against the original starter or the vehicle’s requirements.

The 1.2kW power rating gives a useful comparison point if you are matching output to a removed starter, but the correct choice still depends on the full fitment details. Where a vehicle listing is provided, use it as a guide and then confirm the shape, mounting pattern, pinion count, and rotation direction before fitting.

Because starter motors can look similar while differing in mounting style or gear arrangement, it is worth comparing photos, measurements, and the part number together. This unit is listed as a new OEX starter motor and is supplied with a 3 year passenger warranty or 1 year commercial warranty, so confirm the intended vehicle use as well as the physical match.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number DXS506 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Mount Centres A 94mm, Nose Cone Length 65mm, Overall Length 210mm, Pinion Diameter 25mm, Rotation CW, Voltage 12, Starter Mount Type 2 Hole.

Additional published details for cross-checking include Product Group 2 STARTER MOTORS, Part No. DXS506, Brand OEX, Description OEX Starter Motor 12V 9Th CW Delco Style, Flange Diameter 75mm, Mount Hole Diameter 11.5, Number of Teeth 9, Pinion at Rest 29mm, Power Rating 1.2kW.

OEX Starter Motor 12V 9Th CW Delco Style. Part number DXS506 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number DXS506, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include HOLDEN CAPTIVA 5, HOLDEN CAPTIVA 5 2011, HOLDEN CAPTIVA 5 2012, HOLDEN CAPTIVA 5 2013. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Please confirm compatibility using part number DXS506, the 12V 9 tooth clockwise Delco-style specification, and the listed mounting and dimension details before purchase.

FAQ

What is the part number for this starter motor?

The part number is DXS506. For this listing, part number DXS506 is the main reference point. Listed voltage is 12. Published fitment references include HOLDEN CAPTIVA 5, HOLDEN CAPTIVA 5 2011, HOLDEN CAPTIVA 5 2012. These details should still be checked against the original unit before ordering.

What voltage is this starter motor?

It is a 12V starter motor. For this listing, part number DXS506 is the main reference point. Listed voltage is 12. Published fitment references include HOLDEN CAPTIVA 5, HOLDEN CAPTIVA 5 2011, HOLDEN CAPTIVA 5 2012. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

The pinion has 9 teeth. For this listing, part number DXS506 is the main reference point. Listed voltage is 12. Published fitment references include HOLDEN CAPTIVA 5, HOLDEN CAPTIVA 5 2011, HOLDEN CAPTIVA 5 2012. These details should still be checked against the original unit before ordering.

What rotation does this starter motor use?

It is clockwise rotation, listed as CW. For this listing, part number DXS506 is the main reference point. Listed voltage is 12. Published fitment references include HOLDEN CAPTIVA 5, HOLDEN CAPTIVA 5 2011, HOLDEN CAPTIVA 5 2012. These details should still be checked against the original unit before ordering.

What vehicle fitment is listed?

Holden Captiva 5 and Holden Captiva 7 applications are listed, including 2011 to 2015 model years in the supplied fitment data. For this listing, part number DXS506 is the main reference point. Listed voltage is 12. Published fitment references include HOLDEN CAPTIVA 5, HOLDEN CAPTIVA 5 2011, HOLDEN CAPTIVA 5 2012. These details should still be checked against the original unit before ordering.

What warranty is listed for this starter motor?

The listed warranty is 3 years for passenger use and 1 year for commercial use. For this listing, part number DXS506 is the main reference point. Listed voltage is 12. Published fitment references include HOLDEN CAPTIVA 5, HOLDEN CAPTIVA 5 2011, HOLDEN CAPTIVA 5 2012. These details should still be checked against the original unit before ordering.