Mitsubishi Starter Motor 24V 10 Tooth CW M8T62471AMA

The Mitsubishi starter motor listed here is a new 24V unit with 10 teeth and clockwise rotation, part number M8T62471AMA. It is a 5kW starter motor with a 3 hole mount type, intended for applications that match the same electrical and physical setup.

Key dimensions to check before purchase include 127mm mount centres A, 90mm mount centres B, 90mm mount centres C, an 89mm flange diameter and 11mm mount hole diameter. The pinion diameter is 40mm and pinion at rest is 27mm, so these measurements matter when matching against the original unit.

This starter motor suits Mitsubishi unit make applications and is listed for wet or dry clutch use. It carries a 2 years / 400,000km warranty and weighs 13.5kg, which may be useful when comparing against an existing starter or replacement part.

Because starter motors must match the vehicle, engine and mounting arrangement exactly, the safest approach is to confirm the part number M8T62471AMA together with the 24V, 10 tooth and clockwise rotation details before ordering.

Key Features

• New starter motor
• 24V unit
• 10 tooth pinion
• Clockwise rotation
• 5kW power rating
• 3 hole mount type

Specifications

• Part number: M8T62471AMA
• Brand: Mitsubishi
• Type: Starter motor
• Voltage: 24V
• Power rating: 5kW
• Number of teeth: 10
• Rotation: CW
• New / remanufactured: New

Verified fitment applications

• ASIA MOTORS COSMOS
• ATLAS COPCO QAS200
• ECOLOG 550E
• ECOLOG 560E
• ECOLOG 574E
• ECOLOG 580E
• ECOLOG 590E
• ECOLOG 594E

Application and Buying Notes

Use the part number M8T62471AMA first, then compare the 24V rating, 10 tooth count, clockwise rotation and 3 hole mount type against the starter you are replacing. Those details are the quickest way to rule in or rule out a match before you go any further.

The mounting measurements are important on this unit: 127mm mount centres A, 90mm mount centres B and 90mm mount centres C, with an 89mm flange diameter and 11mm mount hole diameter. If any of those dimensions differ from your existing starter, the unit should not be assumed to fit.

The pinion details also need checking. This starter has a 40mm pinion diameter and 27mm pinion at rest, so a correct physical match is just as important as the electrical rating. The listed 5kW output and wet or dry clutch suitability should only be used where the application matches the vehicle or equipment being repaired.

If you are replacing an existing Mitsubishi starter motor, compare the old unit carefully and do not rely on appearance alone. The same starter family can still differ by rotation, tooth count, mounting pattern or overall dimensions, and those differences are enough to stop a proper installation.

The listed fitment applications include ASIA MOTORS COSMOS, ATLAS COPCO QAS200, ECOLOG 550E and 560E, KALMAR DCF330-12, TIMBERPRO TL745C, UD TRUCKS CONDOR and QUON, plus VOLVO B5, B7, B8 and VOLVO CONSTRUCTION BL60. Use those application names only as a guide and confirm them against the vehicle or machine identification before ordering.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number M8T62471AMA helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty 2 Years 400,000km, Mount Centres A 127mm, Mount Centres C 90mm, Number of Teeth 10, Pinion Diameter 40mm, Rotation CW, Voltage 24, New / Reman. New.

Additional published details for cross-checking include Wet / Dry Clutch Wet or Dry, Product Group 2 STARTER MOTORS, Part No. M8T62471AMA, Brand MITSUBISHI, Description Mitsubishi Starter Motor 24V 10Th CW, Flange Diameter 89mm, Mount Centres B 90mm, Mount Hole Diameter 11, Pinion at Rest 27mm.

Mitsubishi Starter Motor 24V 10Th CW. Part number M8T62471AMA should be checked first. Listed voltage is 24. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number M8T62471AMA, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 24 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Confirm fitment by matching part number M8T62471AMA, 24V voltage, 10 tooth count, CW rotation, 3 hole mount type and all mounting dimensions against the original starter and the vehicle or equipment application.

FAQ

Is this starter motor new or remanufactured?

It is listed as new, not remanufactured. For this listing, part number M8T62471AMA is the main reference point. Listed voltage is 24. Published fitment references include ASIA MOTORS COSMOS, ASIA MOTORS COSMOS 2008, ATLAS COPCO QAS200. These details should still be checked against the original unit before ordering.

What voltage does this starter motor use?

The listed voltage is 24V. For this listing, part number M8T62471AMA is the main reference point. Listed voltage is 24. Published fitment references include ASIA MOTORS COSMOS, ASIA MOTORS COSMOS 2008, ATLAS COPCO QAS200. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

The pinion has 10 teeth. For this listing, part number M8T62471AMA is the main reference point. Listed voltage is 24. Published fitment references include ASIA MOTORS COSMOS, ASIA MOTORS COSMOS 2008, ATLAS COPCO QAS200. These details should still be checked against the original unit before ordering.

What rotation does this starter motor have?

The rotation is clockwise (CW). For this listing, part number M8T62471AMA is the main reference point. Listed voltage is 24. Published fitment references include ASIA MOTORS COSMOS, ASIA MOTORS COSMOS 2008, ATLAS COPCO QAS200. These details should still be checked against the original unit before ordering.

What part number should I match before ordering?

The part number is M8T62471AMA. For this listing, part number M8T62471AMA is the main reference point. Listed voltage is 24. Published fitment references include ASIA MOTORS COSMOS, ASIA MOTORS COSMOS 2008, ATLAS COPCO QAS200. These details should still be checked against the original unit before ordering.

Which applications are listed for this starter motor?

Listed applications include ASIA MOTORS COSMOS, ATLAS COPCO QAS200, ECOLOG 550E and 560E, KALMAR DCF330-12, TIMBERPRO TL745C, UD TRUCKS CONDOR and QUON, and VOLVO B5, B7, B8 and VOLVO CONSTRUCTION BL60. For this listing, part number M8T62471AMA is the main reference point. Listed voltage is 24. Published fitment references include ASIA MOTORS COSMOS, ASIA MOTORS COSMOS 2008, ATLAS COPCO QAS200. These details should still be checked against the original unit before ordering.