Eaton Push Switch On-off Dpst 10A 12/24V ESP6/6

The Eaton push switch, part number ESP6/6, is a non-illuminated switch rated at 10 amp for 12V or 24V systems. It uses an On-Off-DPST switch action with 2 poles and 4 terminals, making it suitable where a simple push-operated control is required in an auto electrical setup.

This switch is supplied as a single each item and features an aluminium housing with an IP65 rating. The compact face measures 95mm x 95mm, and the switch is lockable in the off position for applications where accidental activation needs to be reduced.

Operation is described as push to stop and pull to release, with both normally open and normally closed circuits noted in the product details. For buyers comparing similar controls, the key identifiers here are the Eaton brand, ESP6/6 part number, 10A rating, and 12V or 24V compatibility.

Key Features

• Eaton push switch
• Part number: ESP6/6
• On-Off-DPST switch action
• 10 amp rating
• Suitable for 12V or 24V systems
• Non-illuminated

Specifications

• Type: Switch
• Brand: Eaton
• Product type: Switch
• Unit of measure: Each
• Power rating: 10 amp
• Voltage: 12 or 24V
• Number of positions: 1
• Number of poles: 2

Application and Buying Notes

When checking whether the ESP6/6 is the right choice, start with the electrical system voltage and the load it will carry. This switch is rated at 10 amp and is specified for 12V or 24V use, so it suits control circuits only where those figures match the application requirements.

The switch action is On-Off-DPST, with 2 poles and 4 terminals, so wiring layout matters. If the existing control uses a different pole count, terminal count, or circuit arrangement, the switch may not be interchangeable without reworking the circuit. The notes for normally open and normally closed circuits are useful, but they should be matched carefully to the job at hand.

Physical size is another important check. The listed face dimensions are 95mm x 95mm, and the switch has an aluminium housing with IP65 protection. That helps when space, mounting style, and resistance to dust or water ingress are part of the installation requirements.

Because fitment data is not supplied, the safest way to buy is to confirm against the part number ESP6/6, the Eaton brand, and the detailed application requirements of the vehicle or equipment being repaired. If you are replacing an existing switch, compare the voltage, terminal count, pole count, mounting size, and switch action before ordering.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number ESP6/6 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type SWITCH, Unit of Measure EACH, Warranty One Year, Power Rating (Amp) 10, Voltage 12 or 24, Number of Positions 1, Switch Illumination Non Illuminated, Product Group 2 FUSES BREAKERS RELAYS SWITCHES, Part No. ESP6/6.

Additional published details for cross-checking include Brand EATON, Description Eaton Push Switch On - Off - DPST (Contacts Rated 10A @ 12 or 24V), Number of Terminals 4, Switch Action On - Off - DPST, Number of Poles 2, Switch Type Push, Weight 1.3kg, Product Group 1 AUTO ELEC ACCESSORIES.

Eaton Push Switch On - Off - DPST (Contacts Rated 10A @ 12 or 24V). Part number ESP6/6 should be checked first. Listed voltage is 12 or 24. Listed output rating is 10. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number ESP6/6, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a switch in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 or 24 and output 10 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Where no verified application list is available, the part number, mounting details, connector style, and published specifications should be used as the primary selection criteria.

Compatibility note: Confirm compatibility by matching part number ESP6/6, the Eaton brand, 10A rating, 12V or 24V requirement, 2-pole/4-terminal On-Off-DPST layout, and the 95mm x 95mm dimensions against your existing switch or application.

FAQ

What is the part number for this Eaton switch?

The part number is ESP6/6. For this listing, part number ESP6/6 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 10. These details should still be checked against the original unit before ordering.

What voltage systems is it listed for?

It is listed for 12V or 24V systems. For this listing, part number ESP6/6 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 10. These details should still be checked against the original unit before ordering.

What is the current rating?

The switch is rated at 10 amp. For this listing, part number ESP6/6 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 10. These details should still be checked against the original unit before ordering.

Is the switch illuminated?

No. It is listed as non illuminated. For this listing, part number ESP6/6 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 10. These details should still be checked against the original unit before ordering.

How many terminals and poles does it have?

It has 4 terminals and 2 poles. For this listing, part number ESP6/6 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 10. These details should still be checked against the original unit before ordering.

What mounting size or face dimension is listed?

The listed dimensions are 95mm x 95mm. For this listing, part number ESP6/6 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 10. These details should still be checked against the original unit before ordering.