Denso Starter Motor 24V 10T CW 4.8KW 438000-0060

This Denso starter motor is a new 24V unit with 10 teeth, clockwise rotation, and a 4.8kW power rating. It carries part number 438000-0060 and is listed as suited to Denso unit make applications, with a note for Cummins engine applications.

Key physical details include a 2-hole starter mount, 127mm mount centres, an 89mm flange diameter, and 11mm mount hole diameter. Overall length is 278mm, the pinion at rest measures 47mm, and the pinion diameter is 40mm.

The unit weighs 7.58kg and is supplied as a single each. It is described as a new starter motor with a one-year warranty, and the specification set also notes wet or dry clutch suitability.

Key Features

• New Denso starter motor
• 24V electrical system
• 10-tooth pinion
• Clockwise rotation
• 4.8kW power rating
• High-voltage tested armature and field coils

Specifications

• Brand: Denso
• Part No.: 438000-0060
• Product type: Starter motor
• Voltage: 24V
• Rotation: CW
• Number of teeth: 10
• Power rating: 4.8kW
• Starter mount type: 2 hole

Application and Buying Notes

Before ordering, compare the part number 438000-0060 with the existing starter or the application details on your engine. This unit is a 24V Denso starter motor with clockwise rotation and a 10-tooth pinion, so those points need to match the vehicle or equipment setup exactly.

Physical measurements matter just as much as electrical details. Check the 2-hole starter mount, 127mm mount centres, 89mm flange diameter, 11mm mount hole diameter, 278mm overall length, and 47mm pinion at rest against the unit being replaced.

The 4.8kW rating, 40mm pinion diameter, and wet or dry clutch note are useful compatibility checkpoints, but they should be matched to the original starter arrangement rather than used as a substitute for proper identification. If the old unit is unavailable, use the engine application, part number, and mounting measurements together to confirm suitability.

This starter is listed for Denso unit make applications with a note for Cummins engine applications. That is a useful indicator, but it is still important to verify the complete spec set before purchase, especially where starter fitment can vary by engine build, mounting style, or electrical configuration.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number 438000-0060 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty One Year, Mount Centres A 127mm, Number of Teeth 10, Pinion at Rest 47mm, Power Rating 4.8kW, Suits Unit Make Denso, Note Cummins engine applications, Starter Mount Type 2 Hole.

Additional published details for cross-checking include Weight 7.58kg, Product Group 1 ROTATING ELECTRICAL, Part No. 438000-0060, Brand DENSO, Description Denso Starter Motor 24V 10Th CW, Flange Diameter 89mm, Mount Hole Diameter 11, Overall Length 278mm, Pinion Diameter 40mm, Rotation CW.

Denso Starter Motor 24V 10Th CW. Part number 438000-0060 should be checked first. Listed voltage is 24. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number 438000-0060, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 24 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Where no verified application list is available, the part number, mounting details, connector style, and published specifications should be used as the primary selection criteria.

In the absence of a verified fitment list, the safest approach is to compare the removed unit directly with the listed product details. That includes checking the housing style, pulley layout, regulator arrangement, and any visible identification numbers before supply is approved.

The listed warranty is One Year. Warranty terms should be considered alongside correct application and part identification, as warranty does not replace fitment confirmation.

Compatibility note: Confirm fitment by checking part number 438000-0060, 24V voltage, 10-tooth clockwise rotation, 2-hole mounting, and all listed measurements against the existing starter and engine application before ordering.

FAQ

What is the part number for this starter motor?

The part number is 438000-0060. For this listing, part number 438000-0060 is the main reference point. Listed voltage is 24. These details should still be checked against the original unit before ordering.

Is this a 12V or 24V starter?

It is a 24V starter motor. For this listing, part number 438000-0060 is the main reference point. Listed voltage is 24. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

The pinion has 10 teeth. For this listing, part number 438000-0060 is the main reference point. Listed voltage is 24. These details should still be checked against the original unit before ordering.

What rotation does this starter use?

It is clockwise rotation, listed as CW. For this listing, part number 438000-0060 is the main reference point. Listed voltage is 24. These details should still be checked against the original unit before ordering.

What mounting details are listed?

It has a 2-hole starter mount, 127mm mount centres, an 89mm flange diameter, and 11mm mount hole diameter. For this listing, part number 438000-0060 is the main reference point. Listed voltage is 24. These details should still be checked against the original unit before ordering.

Is this a new unit and is there a warranty?

Yes. It is listed as new and carries a one-year warranty. For this listing, part number 438000-0060 is the main reference point. Listed voltage is 24. These details should still be checked against the original unit before ordering.