Denso Starter Motor 24V 11 Tooth CW DXS618

This Denso starter motor is a 24V, clockwise rotation unit with 11 teeth and part number DXS618. It is listed as new, with a 7.8kW power rating, and carries a one year warranty. For buyers replacing an existing starter, the important checks are the voltage, rotation, tooth count, mounting layout, and the OEM number RE505465.

Physical dimensions matter on starters, and this unit has a 127mm mount centres A measurement, 90mm mount centres B, 90mm mount centres C, a 89mm flange diameter, and 12mm mount hole diameter. The pinion diameter is 40mm and the pinion at rest is 48mm. It is a 3 hole starter motor, which makes the mounting pattern a key compatibility point before ordering.

Key Features

• 24V starter motor
• 11 tooth pinion
• Clockwise rotation
• 3 hole mount type
• New unit
• One year warranty

Specifications

• Brand: Denso
• Product type: Starter motor
• Voltage: 24V
• Power rating: 7.8kW
• Rotation: CW
• Number of teeth: 11
• Pinion diameter: 40mm
• Pinion at rest: 48mm

Known fitment applications

• John Deere 120C
• John Deere 120D
• John Deere 160C LC
• John Deere 160D LC
• John Deere 200C LC
• John Deere 200D/DLC
• John Deere 200LC
• John Deere 230C LC

Application and Buying Notes

Before ordering, compare the existing starter against DXS618, RE505465, and the measured details: 24V, 11 teeth, CW rotation, 127mm mount centres A, 90mm mount centres B and C, 89mm flange diameter, and 12mm mount hole diameter. Those are the most useful checks when matching a replacement starter motor, because a starter can look similar while differing in rotation, tooth count, or mounting pattern.

The 7.8kW power rating is another detail worth verifying against the application and the original unit. For a starter motor, matching the voltage and physical fit is not enough on its own if the application requires a specific output level. The wet or dry clutch note broadens the intended use, but it should still be checked against the machine and the removed starter.

If you are servicing a machine that already uses a Denso starter, the part number DXS618 and OEM number RE505465 are the strongest reference points. Where the machine model is listed in the fitment section, use it as a guide, then confirm the existing starter’s tooth count, rotation, and mount measurements before purchase.

This is a new starter motor, sold each, with a one year warranty. For practical workshop use, that means it is a replacement component intended to match the OE-style application and installation pattern, not a universal starter. A careful side-by-side comparison is still the best way to avoid downtime and returns.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number DXS618 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty One Year, Mount Centres A 127mm, Mount Centres C 90mm, Number of Teeth 11, Pinion Diameter 40mm, Rotation CW, Voltage 24, New / Reman. New.

Additional published details for cross-checking include Wet / Dry Clutch Wet or Dry, Product Group 2 STARTER MOTORS, Part No. DXS618, Brand DENSO, Description Denso Starter Motor 24V 11Th CW, Flange Diameter 89mm, Mount Centres B 90mm, Mount Hole Diameter 12, Pinion at Rest 48mm.

Denso Starter Motor 24V 11Th CW. Part number DXS618 should be checked first. Listed voltage is 24. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number DXS618, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 24 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include JOHN DEERE 120C, JOHN DEERE 120C 2002, JOHN DEERE 120C 2003, JOHN DEERE 120C 2004. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Confirm compatibility by matching part number DXS618, OEM number RE505465, 24V electrical requirement, 11 tooth CW configuration, and the listed mount and flange measurements against the starter currently fitted to the machine.

FAQ

What is the part number for this starter motor?

The part number is DXS618. For this listing, part number DXS618 is the main reference point. Listed voltage is 24. Published fitment references include JOHN DEERE 120C, JOHN DEERE 120C 2002, JOHN DEERE 120C 2003. These details should still be checked against the original unit before ordering.

What voltage is this starter motor?

It is a 24V starter motor. For this listing, part number DXS618 is the main reference point. Listed voltage is 24. Published fitment references include JOHN DEERE 120C, JOHN DEERE 120C 2002, JOHN DEERE 120C 2003. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

The pinion has 11 teeth. For this listing, part number DXS618 is the main reference point. Listed voltage is 24. Published fitment references include JOHN DEERE 120C, JOHN DEERE 120C 2002, JOHN DEERE 120C 2003. These details should still be checked against the original unit before ordering.

What rotation does this starter motor use?

It is clockwise rotation, shown as CW. For this listing, part number DXS618 is the main reference point. Listed voltage is 24. Published fitment references include JOHN DEERE 120C, JOHN DEERE 120C 2002, JOHN DEERE 120C 2003. These details should still be checked against the original unit before ordering.

What OEM number is listed for this starter?

The OEM number listed is RE505465. For this listing, part number DXS618 is the main reference point. Listed voltage is 24. Published fitment references include JOHN DEERE 120C, JOHN DEERE 120C 2002, JOHN DEERE 120C 2003. These details should still be checked against the original unit before ordering.

Which machine families are listed in the fitment data?

The listed applications include John Deere 120C, 120D, 160C LC, 160D LC, 200C LC, 200D/DLC, 200LC, 230C LC, 240D LC, 270C LC, 270D LC, 670D and 672D. For this listing, part number DXS618 is the main reference point. Listed voltage is 24. Published fitment references include JOHN DEERE 120C, JOHN DEERE 120C 2002, JOHN DEERE 120C 2003. These details should still be checked against the original unit before ordering.