Denso Alternator 24V 80A Remanufactured - DXA4097

The Denso Alternator 24V 80A, part number DXA4097, is a remanufactured rotating electrical unit supplied as each. It is an 80 amp, 24 volt alternator with an internal regulator, a single leg mount, and an AA pulley section.

Key physical details include a 58mm mount leg thickness, 168mm mount centre to centre, M8x1.25 adjusting hole diameter, 74mm pulley outside diameter, 17 shaft dimension, and a listed weight of 6.05kg. These measurements are the main checkpoints when matching the unit to an existing application.

This alternator is listed for Denso units and carries a one year warranty. The stated features are premium cores with precise OE assembly benchmarks, design aimed at demanding heat and electrical requirements, and a compact, lightweight layout.

Because alternators must match both the electrical setup and the mounting pattern, the part number DXA4097, 24V charging system, 80A output, and single leg mount should all be checked against the vehicle before purchase.

Key Features

• Remanufactured Denso alternator
• 24V system with 80A output
• Internal regulator
• Single leg alternator mount
• AA pulley section
• One year warranty

Specifications

• Brand: Denso
• Part No.: DXA4097
• Type: Alternator
• Voltage: 24V
• Power Rating: 80A
• New / Reman.: Remanufactured
• Alternator Mount: Single Leg
• Mount Leg Thickness: 58mm

Verified fitment references

• Hino 300 Series
• Hino 500 Series
• Hino Dutro
• Hino FB
• Hino Ranger
• Hino RB
• Toyota Coaster
• Toyota Dyna

Application and Buying Notes

Before ordering, compare the alternator mounting pattern and electrical specification on the vehicle with the listed DXA4097 details. The critical points here are 24V charging, 80A output, single leg mount, 168mm mount centre to centre, 58mm mount leg thickness, and the M8x1.25 adjusting hole.

The pulley setup also matters. This unit has an AA pulley section and a 74mm pulley outside diameter, so the belt profile and pulley dimensions need to align with the existing drive arrangement. The listed shaft dimension is 17, which is another useful check when comparing like-for-like units.

As this is a remanufactured alternator, it is intended to meet OE assembly benchmarks using premium cores. That makes it sensible to inspect the old unit carefully for mounting layout, connector arrangement, and the vehicle’s original charging system requirements before fitting.

The part number DXA4097 is the most reliable reference when matching this alternator. If the vehicle uses a Denso alternator and the fitment history overlaps with the model list below, confirm the exact application details rather than relying on the vehicle badge alone.

Weight can also help when confirming a direct replacement. At 6.05kg, this alternator should be compared with the removed unit where possible, especially if space around the mount, pulley line, or bracket clearance is tight.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number DXA4097 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty One Year, Mount Leg Thickness 58mm, Power Rating (Amp) 80, Pulley Section AA, Suits Unit Make Denso, Alternator Mount Single Leg, New / Reman. Remanufactured, Shaft Dimension 17.

Additional published details for cross-checking include Product Group 2 ALTERNATORS, Part No. DXA4097, Brand DENSO, Description Denso Alternator 24V 80A, Adjusting Hole Diameter M8x1.25, Pin Code IR11, Pulley Outside Diameter 74mm, Regulator Type Internal, Voltage 24.

Denso Alternator 24V 80A. Part number DXA4097 should be checked first. Listed voltage is 24. Listed output rating is 80. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Single Leg. Regulator type is Internal. Pulley configuration is AA. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number DXA4097, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

Compatibility note: Confirm fitment using part number DXA4097, the 24V 80A specification, the single leg mount, and the stated mounting and pulley dimensions before buying. Vehicle badge or model family alone is not enough to verify compatibility.

FAQ

Is this alternator new or remanufactured?

It is listed as remanufactured. For this listing, part number DXA4097 is the main reference point. Listed voltage is 24. Listed output rating is 80. Published fitment references include CHIRON HINO RB8, CHIRON HINO RB8 2012, DAIHATSU DELTA. These details should still be checked against the original unit before ordering.

What is the part number?

The part number is DXA4097. For this listing, part number DXA4097 is the main reference point. Listed voltage is 24. Listed output rating is 80. Published fitment references include CHIRON HINO RB8, CHIRON HINO RB8 2012, DAIHATSU DELTA. These details should still be checked against the original unit before ordering.

What voltage and amperage does it have?

It is a 24V alternator with an 80A power rating. For this listing, part number DXA4097 is the main reference point. Listed voltage is 24. Listed output rating is 80. Published fitment references include CHIRON HINO RB8, CHIRON HINO RB8 2012, DAIHATSU DELTA. These details should still be checked against the original unit before ordering.

What type of regulator does it use?

It has an internal regulator. For this listing, part number DXA4097 is the main reference point. Listed voltage is 24. Listed output rating is 80. Published fitment references include CHIRON HINO RB8, CHIRON HINO RB8 2012, DAIHATSU DELTA. These details should still be checked against the original unit before ordering.

What mount style is listed?

The alternator mount is listed as single leg. For this listing, part number DXA4097 is the main reference point. Listed voltage is 24. Listed output rating is 80. Published fitment references include CHIRON HINO RB8, CHIRON HINO RB8 2012, DAIHATSU DELTA. These details should still be checked against the original unit before ordering.

Which vehicle groups are referenced for fitment?

The listed fitment references include Hino 300 Series, Hino 500 Series, Hino Dutro, Hino FB, Hino Ranger, Hino RB, Toyota Coaster, Toyota Dyna, Toyota Dyna 400, Daihatsu Delta, UD Nissan Diesel MK Series, UD Trucks Condor, Mercedes-Benz Actros MP2 / MP3, and Chiron Hino RB8. For this listing, part number DXA4097 is the main reference point. Listed voltage is 24. Listed output rating is 80. Published fitment references include CHIRON HINO RB8, CHIRON HINO RB8 2012, DAIHATSU DELTA. These details should still be checked against the original unit before ordering.