OEX Starter Motor 12V 9 Tooth CW Denso Style DXS4043

The OEX starter motor DXS4043 is a new 12V unit with clockwise rotation and a 9 tooth pinion, built in a Denso style configuration. It is rated at 1.3kW and uses a 2 hole starter mount, with an M10x1.5 mount hole diameter and 81mm mount centre-to-centre spacing.

Key dimensions to check include a 68mm flange diameter, 67mm nose cone length, 190mm overall length, and a 31mm pinion diameter. The pinion sits 35mm at rest, and the unit weighs 2.26kg.

This starter motor is listed as suitable for Denso applications and is supplied new. The part number is DXS4043, which is the safest reference to match against your existing starter or vehicle application details before ordering.

Key Features

• 12V starter motor
• Clockwise rotation
• 9 tooth pinion
• 1.3kW power rating
• New unit
• 2 hole starter mount

Specifications

• Brand: OEX
• Part No.: DXS4043
• Type: Starter Motor
• Voltage: 12V
• Power Rating: 1.3kW
• Rotation: CW
• Number of Teeth: 9
• Suits Unit Make: Denso

Supported application details

• Chrysler 300C
• Chrysler 300C 2011
• Jeep Grand Cherokee
• Jeep Grand Cherokee 2010
• Jeep Grand Cherokee 2011
• Jeep Grand Cherokee 2012
• Jeep Grand Cherokee 2013
• Jeep Grand Cherokee 2014

Application and Buying Notes

Before buying, compare the part number DXS4043, the 12V rating, 9 tooth pinion, and clockwise rotation with the starter you are replacing. Those details need to line up with the vehicle application and existing unit style, especially on Denso-type starters where mounting and drive dimensions are important.

The mounting details are just as important as the electrical rating. This unit has a 2 hole mount, M10x1.5 mount hole diameter, and 81mm mount centre-to-centre spacing, so it should only be considered where those measurements match the vehicle’s starter location and the original part.

Physical size can also rule a part in or out. Check the 68mm flange diameter, 67mm nose cone length, 190mm overall length, and 31mm pinion diameter against the old starter before ordering. Even when an application list is available, matching the dimensions is the best way to avoid a costly mismatch.

The listed warranty is 3 years for passenger use and 1 year for commercial use. Make sure the intended use matches that warranty category, and confirm the starter is suitable for a dry clutch application if that applies to your vehicle setup.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number DXS4043 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Mount Hole Diameter M10x1.5, Number of Teeth 9, Pinion at Rest 35mm, Power Rating 1.3kW, Suits Unit Make Denso, Mount Cnt to Cnt 81mm, Starter Mount Type 2 Hole.

Additional published details for cross-checking include Weight 2.26kg, Product Group 1 ROTATING ELECTRICAL, Part No. DXS4043, Brand OEX, Description OEX Starter Motor 12V 9Th CW Denso Style, Flange Diameter 68mm, Nose Cone Length 67mm, Overall Length 190mm, Pinion Diameter 31mm, Rotation CW.

OEX Starter Motor 12V 9Th CW Denso Style. Part number DXS4043 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number DXS4043, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include CHRYSLER 300C, CHRYSLER 300C 2011, JEEP GRAND CHEROKEE, JEEP GRAND CHEROKEE 2010, JEEP GRAND CHEROKEE 2011, JEEP GRAND CHEROKEE 2012. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Confirm fitment by matching part number DXS4043, 12V clockwise Denso-style specifications, tooth count, mounting dimensions, and the vehicle application details before purchase.

FAQ

What is the part number for this starter motor?

The part number is DXS4043. For this listing, part number DXS4043 is the main reference point. Listed voltage is 12. Published fitment references include CHRYSLER 300C, CHRYSLER 300C 2011, JEEP GRAND CHEROKEE. These details should still be checked against the original unit before ordering.

Is this a new or remanufactured unit?

This starter motor is listed as new. For this listing, part number DXS4043 is the main reference point. Listed voltage is 12. Published fitment references include CHRYSLER 300C, CHRYSLER 300C 2011, JEEP GRAND CHEROKEE. These details should still be checked against the original unit before ordering.

What voltage and rotation does it have?

It is a 12V starter motor with clockwise rotation. For this listing, part number DXS4043 is the main reference point. Listed voltage is 12. Published fitment references include CHRYSLER 300C, CHRYSLER 300C 2011, JEEP GRAND CHEROKEE. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

The pinion has 9 teeth. For this listing, part number DXS4043 is the main reference point. Listed voltage is 12. Published fitment references include CHRYSLER 300C, CHRYSLER 300C 2011, JEEP GRAND CHEROKEE. These details should still be checked against the original unit before ordering.

What vehicle applications are listed?

The listed applications include Chrysler 300C, Jeep Grand Cherokee from 2010 to 2018, and Jeep Wrangler, including Jeep Wrangler 2011. For this listing, part number DXS4043 is the main reference point. Listed voltage is 12. Published fitment references include CHRYSLER 300C, CHRYSLER 300C 2011, JEEP GRAND CHEROKEE. These details should still be checked against the original unit before ordering.

What warranty is provided?

The warranty is 3 years for passenger use and 1 year for commercial use. For this listing, part number DXS4043 is the main reference point. Listed voltage is 12. Published fitment references include CHRYSLER 300C, CHRYSLER 300C 2011, JEEP GRAND CHEROKEE. These details should still be checked against the original unit before ordering.