Nikko Starter Motor 24V 11 Tooth CW 4.5KW Part No. NXS9727

This Nikko starter motor is a 24V, clockwise rotation unit with 11 teeth and a 4.5kW power rating. It is listed as a new starter motor under part number NXS9727, with a 2 hole starter mount, 120mm mount centres, and a 95mm flange diameter.

The unit is specified with a 13mm mount hole diameter and a 40mm pinion diameter. It is intended for Nikko applications and is supplied as a dry clutch starter motor. For buyers matching a replacement, the part number, voltage, rotation, tooth count, and mounting dimensions are the key checks.

This starter motor is described as built to withstand the harshest environments, which suits the heavy-duty nature of the applications shown against the fitment data. Confirming the correct 24V electrical system and the mounting layout before ordering is essential, especially where equipment may have been updated or previously repaired.

Key Features

• 24V starter motor
• 11 tooth pinion
• Clockwise rotation
• 4.5kW power rating
• 2 hole starter mount
• New unit

Specifications

• Brand: Nikko
• Part No.: NXS9727
• Product type: Starter Motor
• Unit of measure: Each
• Voltage: 24
• Rotation: CW
• Number of teeth: 11
• Power rating: 4.5kW

Known fitment applications

• CASE CX135
• CASE CX135SR
• CASE CX225SR
• DYNAPAC CC224HF/CHF
• DYNAPAC CC224HI
• DYNAPAC CP215
• DYNAPAC CP224/W
• HITACHI LX70

Application and Buying Notes

Before ordering, match the part number NXS9727 first, then confirm the electrical and mechanical details: 24V, 11 tooth, clockwise rotation, 4.5kW, and the 2 hole mounting arrangement. The 120mm mount centres, 95mm flange diameter, 13mm mount hole diameter, and 40mm pinion diameter are the practical measurements that help rule out a mismatch.

The fitment data links this starter motor to a range of CASE, DYNAPAC, HITACHI, ISUZU, KOBELCO, LINK-BELT, SUMITOMO, and TAKEUCHI applications. Even where a machine model appears on the list, the safest approach is to compare the existing starter’s part number and mounting dimensions, because similar-looking units can differ in rotation, tooth count, flange size, or pinion diameter.

This is a new starter motor and it carries a one year warranty. That said, warranty coverage does not replace fitment checking, and it should not be taken as confirmation that the unit will suit every machine in a family or every year within a model line. For heavy equipment and industrial applications, the 24V system requirement is especially important because a 12V unit will not be a suitable substitute.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number NXS9727 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty One Year, Mount Centres A 120mm, Number of Teeth 11, Power Rating 4.5kW, Suits Unit Make Nikko, Item Type Starter Motor, Starter Mount Type 2 Hole.

Additional published details for cross-checking include Product Group 2 STARTER MOTORS, Part No. NXS9727, Brand NIKKO, Description Nikko Starter Motor 24V 11Th CW, Flange Diameter 95mm, Mount Hole Diameter 13, Pinion Diameter 40mm, Rotation CW, Voltage 24, New / Reman. New.

Nikko Starter Motor 24V 11Th CW. Part number NXS9727 should be checked first. Listed voltage is 24. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number NXS9727, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 24 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include CASE CX135, CASE CX135 2005, CASE CX135 2006, CASE CX135 2007, DYNAPAC CC224HF/CHF, DYNAPAC CC224HF/CHF 2011. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

The listed warranty is One Year. Warranty terms should be considered alongside correct application and part identification, as warranty does not replace fitment confirmation.

Compatibility note: Confirm fitment by matching part number NXS9727, then verify 24V, CW rotation, 11 teeth, 2 hole mounting, 120mm mount centres, 95mm flange diameter, 13mm mount hole diameter, and 40mm pinion diameter against the existing unit and machine application.

FAQ

What is the part number for this starter motor?

The part number is NXS9727. For this listing, part number NXS9727 is the main reference point. Listed voltage is 24. Published fitment references include CASE CX135, CASE CX135 2005, CASE CX135 2006. These details should still be checked against the original unit before ordering.

What voltage is this starter motor?

It is a 24V starter motor. For this listing, part number NXS9727 is the main reference point. Listed voltage is 24. Published fitment references include CASE CX135, CASE CX135 2005, CASE CX135 2006. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

The pinion has 11 teeth. For this listing, part number NXS9727 is the main reference point. Listed voltage is 24. Published fitment references include CASE CX135, CASE CX135 2005, CASE CX135 2006. These details should still be checked against the original unit before ordering.

What direction does it rotate?

It is clockwise rotation, shown as CW. For this listing, part number NXS9727 is the main reference point. Listed voltage is 24. Published fitment references include CASE CX135, CASE CX135 2005, CASE CX135 2006. These details should still be checked against the original unit before ordering.

What are the main mounting dimensions?

The starter uses a 2 hole mount, with 120mm mount centres, a 95mm flange diameter, and 13mm mount hole diameter. For this listing, part number NXS9727 is the main reference point. Listed voltage is 24. Published fitment references include CASE CX135, CASE CX135 2005, CASE CX135 2006. These details should still be checked against the original unit before ordering.

Which machines are listed in the fitment data?

The fitment data includes CASE CX135, CASE CX135SR, CASE CX225SR, DYNAPAC CC224HF/CHF, DYNAPAC CC224HI, DYNAPAC CP215, DYNAPAC CP224/W, HITACHI LX70, HITACHI ZX110, HITACHI ZX110M, ISUZU 4BG1-T, KOBELCO SK135SR, LINK-BELT 130LX, LINK-BELT SPIN ACE 135, SUMITOMO SH120-3, SUMITOMO SH125X-3, SUMITOMO SH135X-3/XU-3, and TAKEUCHI TB1140.