Capital Toggle Switch Mom On-off-mom On Spdt 20A 12V/24V Part No. 95

This Capital toggle switch is a Mom On - Off - Mom On - SPDT style switch, supplied as part number 95 and sold each. It is a non-illuminated toggle switch rated at 20A @ 12V and listed for 12 or 24 volt use, so it suits electrical work where a momentary centre-off control is required.

Because the switch action is momentary in both outer positions with an off position in the middle, it is important to match the control function to the job before purchase. That switch action is the key detail here, along with the 20A current rating and the 12 or 24 voltage listing.

The product sits in the AUTO ELEC ACCESSORIES and FUSES BREAKERS RELAYS SWITCHES groups, and it carries a one year warranty. If you are replacing a failed toggle switch or selecting a new manual control for an electrical circuit, confirming the part number 95 and the switch action is the safest starting point.

Key Features

• Mom On - Off - Mom On - SPDT switch action
• Toggle switch type
• Non illuminated
• Rated 20A @ 12V
• Listed for 12 or 24 volt use
• Supplied each

Specifications

• Brand: Capital
• Product type: Switch
• Switch type: Toggle
• Switch action: Mom On - Off - Mom On - SPDT
• Power rating: 20A @ 12V
• Voltage: 12 or 24
• Illumination: Non illuminated
• Unit of measure: Each

Application and Buying Notes

Before ordering, confirm that your application calls for a Mom On - Off - Mom On - SPDT toggle switch rather than a latching on/off style. The centre-off position and momentary outer positions are the most important functional details, and they must suit the circuit you are controlling.

Check the electrical load against the stated 20A @ 12V rating and the 12 or 24 volt listing. Those figures matter because they tell you the switch’s stated operating range, but they do not replace proper circuit design or wiring checks for the equipment it will be used on.

The switch is non illuminated, so it will not provide a lighted indication in the switch body. If your panel or dash setup needs an illuminated switch for visibility or status feedback, this part will not provide that function.

Part No. 95 is the clearest identifier to use when comparing replacements. If you already have the old switch out, compare the action, voltage requirement, and physical style carefully before fitting the new one, especially where the original switch has a particular terminal arrangement or mounting style.

This switch is sold individually and is described only as a toggle switch with the listed electrical and action details. When selecting it for repair work, make sure the switch function matches the job first, then confirm the electrical rating is appropriate for the circuit current and voltage you have on hand.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number 95 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type SWITCH, Unit of Measure EACH, Warranty One Year, Switch Action Mom On - Off - Mom On - SPDT, Switch Type Toggle, Product Group 1 AUTO ELEC ACCESSORIES, Part No. 95, Brand CAPITAL, Description Toggle Switch - Mom On/Off/Mom On, Power Rating (Amp) 20A @ 12V.

Additional published details for cross-checking include Voltage 12 or 24, Switch Illumination Non Illuminated, Product Group 2 FUSES BREAKERS RELAYS SWITCHES.

Toggle Switch - Mom On/Off/Mom On. Part number 95 should be checked first. Listed voltage is 12 or 24. Listed output rating is 20A @ 12V. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number 95, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a switch in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 or 24 and output 20A @ 12V should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Where no verified application list is available, the part number, mounting details, connector style, and published specifications should be used as the primary selection criteria.

In the absence of a verified fitment list, the safest approach is to compare the removed unit directly with the listed product details. That includes checking the housing style, pulley layout, regulator arrangement, and any visible identification numbers before supply is approved.

The listed warranty is One Year. Warranty terms should be considered alongside correct application and part identification, as warranty does not replace fitment confirmation.

Compatibility note: Confirm fitment by matching part number 95, the Mom On - Off - Mom On - SPDT action, and the 12 or 24 volt electrical requirement against your existing switch and application before ordering.

FAQ

What type of switch is this?

It is a Capital toggle switch with a Mom On - Off - Mom On - SPDT action. It is listed as non illuminated and supplied each.

What does Mom On - Off - Mom On mean?

It means the switch has momentary action in both outer positions and a centre off position. It is not a standard latching on/off switch.

What voltage is it listed for?

It is listed for 12 or 24 volt use. The stated power rating is 20A @ 12V.

Is the switch illuminated?

No. The specification lists the switch illumination as non illuminated.

What is the part number?

The part number is 95.

Is fitment guaranteed?

No fitment is provided here, so the safest approach is to confirm the switch action, voltage requirement, and part number 95 against your existing part or application before ordering.