OEX Alternator 12V 70A Valeo VXA910

The OEX Alternator VXA910 is a 12V, 70A unit for Valeo applications, supplied new and sold as each. It uses an internal regulator and a twin leg alternator mount, so the mounting style and electrical setup need to match the vehicle specification before purchase.

Key dimensions include 45.5mm inside mounting legs, a 166.5mm mount centre-to-centre measurement, and an M8 x 1.25 adjusting hole diameter. The pulley is a 5 groove type with a 64mm outside diameter, which makes pulley profile and size important checks when comparing against the existing unit.

As with any alternator replacement, the part number VXA910 is the best starting point, followed by the physical mounting points and pulley details. The unit is supplied by OEX under the Rotating Electrical product group and carries a one year warranty.

Key Features

• 12V alternator rated at 70A
• Valeo application
• Internal regulator
• Twin leg alternator mount
• 5 groove pulley
• New unit, supplied each

Specifications

• Brand: OEX
• Part No.: VXA910
• Type: Alternator
• Power rating: 70A
• Voltage: 12V
• Suits unit make: Valeo
• Pulley outside diameter: 64mm
• Pulley section: 5 groove

Application and Buying Notes

Before ordering, compare the part number VXA910 with the existing alternator and check that the replacement is for a Valeo unit. The combination of 12V output, 70A charging capacity, internal regulator, and twin leg mounting should line up with the vehicle's original specification if it is to be a direct replacement.

The physical measurements matter just as much as the electrical details. Confirm the 45.5mm inside mounting legs, 166.5mm mount centre-to-centre distance, and M8 x 1.25 adjusting hole diameter against the old part or vehicle mounting points. If these measurements differ, the alternator may not sit correctly even if the plug or pulley looks similar.

Pulley detail is another important check. This unit has a 64mm outside diameter pulley with a 5 groove section, so the belt profile on the vehicle needs to match. A mismatch here can lead to incorrect belt tracking or an alternator that does not suit the existing drive arrangement.

Because no fitment list is supplied here, use the vehicle's original alternator as the main reference and compare all visible dimensions, mounting style, and electrical features before purchase. The OEX unit is new and uses OE components, but correct application still depends on matching the exact alternator setup fitted to the vehicle.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number VXA910 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty One Year, Inside Mounting Legs 45.5mm, Pulley Outside Diameter 64mm, Regulator Type Internal, Voltage 12, Mount Cnt to Cnt 166.5mm, Insulated Return No, Product Group 1 ROTATING ELECTRICAL.

Additional published details for cross-checking include Part No. VXA910, Brand OEX, Description OEX Alternator 12V 70A Valeo, Adjusting Hole Diameter M8 x 1.25, Power Rating (Amp) 70, Pulley Section 5 Groove, Suits Unit Make Valeo, Alternator Mount Twin Leg, New / Reman. New.

OEX Alternator 12V 70A Valeo. Part number VXA910 should be checked first. Listed voltage is 12. Listed output rating is 70. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Twin Leg. Regulator type is Internal. Pulley configuration is 5 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number VXA910, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 70 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Confirm compatibility by checking the part number VXA910, the Valeo unit make, the 12V 70A rating, twin leg mount, and the listed mounting and pulley measurements against the vehicle's original alternator.

FAQ

What type of alternator is this?

It is an OEX alternator, 12V, 70A, for Valeo applications. It is supplied new and uses an internal regulator. For this listing, part number VXA910 is the main reference point. Listed voltage is 12. Listed output rating is 70. These details should still be checked against the original unit before ordering.

What is the part number?

The part number is VXA910. For this listing, part number VXA910 is the main reference point. Listed voltage is 12. Listed output rating is 70. These details should still be checked against the original unit before ordering.

What pulley does it use?

It uses a 5 groove pulley with a 64mm outside diameter. For this listing, part number VXA910 is the main reference point. Listed voltage is 12. Listed output rating is 70. These details should still be checked against the original unit before ordering.

What mounting details are listed?

The listed mounting details are twin leg alternator mount, 45.5mm inside mounting legs, 166.5mm mount centre-to-centre, and an M8 x 1.25 adjusting hole diameter. For this listing, part number VXA910 is the main reference point. Listed voltage is 12. Listed output rating is 70. These details should still be checked against the original unit before ordering.

Is the unit new or remanufactured?

It is listed as new. For this listing, part number VXA910 is the main reference point. Listed voltage is 12. Listed output rating is 70. These details should still be checked against the original unit before ordering.

What warranty is supplied?

A one year warranty is listed for this alternator. For this listing, part number VXA910 is the main reference point. Listed voltage is 12. Listed output rating is 70. These details should still be checked against the original unit before ordering.