Thunder OE Style Push Button Switch Lightbar 12V 3A - TDR11092

The Thunder OE Style Push Button Switch Lightbar is a 12V switch rated at 3A, with an ON-OFF SPST switching action and blue LED illumination. It is supplied as each unit and carries part number TDR11092, which is the key reference to use when matching the switch to your application.

This switch has a mounting size of 35mm x 18mm, making the aperture dimensions an important check before purchase. The wiring code is provided as Black for earth, Blue for dash light circuit optional, Red for 12V input, and Green for 12V output, so the installation can be matched carefully to the vehicle circuit layout.

The product is listed as suitable for Mitsubishi applications, including Triton ML series 2009-2015, Triton MN series 2009-2015, Challenger series 2009-2015, and Pajero 2009-2015. Those vehicle references are the specific fitment points supplied, and they should be checked against the vehicle, trim, and dash setup before ordering.

Key Features

• 12V push button switch
• 3A power rating
• Blue LED illumination
• ON-OFF SPST action
• Mount size 35mm x 18mm
• Part No. TDR11092

Specifications

• Brand: Thunder
• Product type: Switch
• Unit of measure: Each
• Voltage: 12V
• Power rating: 3A
• Switch type: Push
• Switch action: ON-OFF-SPST
• Switch illumination: Blue LED

Verified fitment references

• Mitsubishi Triton ML series 2009-2015
• Mitsubishi Triton MN series 2009-2015
• Mitsubishi Challenger series 2009-2015
• Mitsubishi Pajero 2009-2015

Application and Buying Notes

Before buying, confirm that the vehicle and dash opening match the stated fitment and mounting size of 35mm x 18mm. The switch is identified as TDR11092, and that part number is the most reliable reference when comparing against an existing switch or an installer’s parts list.

The electrical rating is 12V and 3A, so it is intended for low-current switching applications. The listed wiring code is Black earth, Blue dash light circuit optional, Red 12V input, and Green 12V output, which gives a clear guide for checking how it will integrate with the vehicle’s wiring before installation.

Because this is an OE style push button switch, the appearance and function may suit a range of dash layouts, but the mounting dimensions and application details still need to line up. If you are replacing an existing switch, compare the face size, cut-out size, switch action, and illumination style to avoid ordering the wrong part.

The one year warranty applies to the item as sold, but correct selection still depends on verifying the application. If the vehicle is one of the listed Mitsubishi models, check the series and model year carefully, as the fitment guidance supplied is specific to Triton ML, Triton MN, Challenger, and Pajero applications in the stated date range.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number TDR11092 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type SWITCH, Unit of Measure EACH, Warranty One Year, Power Rating (Amp) 3, Voltage 12V, Switch Type Push, Switch Illumination Blue LED Illumination, Product Group 1 AUTO ELEC ACCESSORIES, Part No. TDR11092, Brand THUNDER.

Additional published details for cross-checking include Description Thunder OE Style Push Button Switch Lightbar, Suits Mitsubishi, Mount Width 18mm, Switch Action On - Off - SPST, Mount Length 35mm, Item Type Switch, Product Group 2 FUSES BREAKERS RELAYS SWITCHES.

Thunder OE Style Push Button Switch Lightbar, Suits Mitsubishi. Part number TDR11092 should be checked first. Listed voltage is 12V. Listed output rating is 3. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number TDR11092, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a switch in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12V and output 3 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Where no verified application list is available, the part number, mounting details, connector style, and published specifications should be used as the primary selection criteria.

Compatibility note: Please confirm fitment using part number TDR11092, the 35mm x 18mm mounting size, the 12V 3A rating, and the listed Mitsubishi model-year applications before purchasing.

FAQ

What is the part number for this switch?

The part number is TDR11092. For this listing, part number TDR11092 is the main reference point. Listed voltage is 12V. Listed output rating is 3. These details should still be checked against the original unit before ordering.

What vehicles are listed for this switch?

The listed applications are Mitsubishi Triton ML series 2009-2015, Triton MN series 2009-2015, Challenger series 2009-2015, and Pajero 2009-2015. For this listing, part number TDR11092 is the main reference point. Listed voltage is 12V. Listed output rating is 3. These details should still be checked against the original unit before ordering.

What are the mounting dimensions?

The mounting size is 35mm x 18mm, with a mount width of 18mm and a mount length of 35mm. For this listing, part number TDR11092 is the main reference point. Listed voltage is 12V. Listed output rating is 3. These details should still be checked against the original unit before ordering.

What is the electrical rating?

The switch is rated at 12V and 3A. For this listing, part number TDR11092 is the main reference point. Listed voltage is 12V. Listed output rating is 3. These details should still be checked against the original unit before ordering.

What type of switch action does it use?

It uses an ON-OFF-SPST switch action and is a push button type. For this listing, part number TDR11092 is the main reference point. Listed voltage is 12V. Listed output rating is 3. These details should still be checked against the original unit before ordering.

How is the switch wired?

The listed wiring code is Black for earth, Blue for dash light circuit optional, Red for 12V input, and Green for 12V output. For this listing, part number TDR11092 is the main reference point. Listed voltage is 12V. Listed output rating is 3. These details should still be checked against the original unit before ordering.