Denso Starter Motor 24V 10 Tooth CW DXS626

The Denso DXS626 starter motor is a new 24V unit with clockwise rotation, 10 teeth on the pinion, and a 7.8kW power rating. It is listed as a 2-hole starter mount design with an 89mm flange diameter, 127mm mount centre-to-centre, and 11mm mount hole diameter.

This starter motor suits Denso applications and is described as suitable for wet or dry clutch use. It measures 300mm overall length, has a 40mm pinion diameter, and a 47mm pinion at rest, which are all useful checks when comparing against the original unit on the machine.

Key construction points include high-voltage tested armature and field coils, premium copper terminals, and a focus on maximum cranking torque. The unit weighs 8.28kg and carries a one year warranty, making it important to confirm the part number DXS626 and the physical mounting details before ordering.

Key Features

• New starter motor
• 24V electrical system
• Clockwise rotation
• 10-tooth pinion
• 2-hole starter mount
• High-voltage tested armature and field coils

Specifications

• Part No.: DXS626
• Brand: Denso
• Power rating: 7.8kW
• Overall length: 300mm
• Flange diameter: 89mm
• Mount hole diameter: 11mm
• Mount centre-to-centre: 127mm
• Pinion diameter: 40mm

Checked fitment applications

• Boart Longyear LF160
• Boart Longyear LF160 2019
• Hitachi ZW180PL-5B
• Hitachi ZW180PL-5B 2015
• Hitachi ZW220-5
• Hitachi ZW220-5 2017
• Tigercat 615C
• Tigercat 615C 2012

Application and Buying Notes

When replacing a starter motor, the safest match is the part number and the physical layout, not just the voltage. For this unit, DXS626, the important checks are 24V, clockwise rotation, 10 teeth, 2-hole mounting, 11mm mount holes, and the 127mm mount centre-to-centre measurement.

The 7.8kW power rating and 300mm overall length also matter when comparing units side by side. If the original starter differs in flange diameter, pinion size, or pinion rest position, the fit may not be correct even if the application name looks similar.

This starter is listed for Denso applications and appears against a defined set of Boart, Hitachi, and Tigercat equipment. Use the application list together with the measurements above to check the starter before fitting, especially where the machine has been modified or the old part number is unreadable.

The one year warranty applies to the unit as supplied, but it does not replace the need to confirm compatibility. It is still worth matching the old starter against the 89mm flange diameter, 40mm pinion diameter, and 47mm pinion at rest to avoid downtime and repeat removal work.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number DXS626 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty One Year, Mount Hole Diameter 11, Overall Length 300mm, Pinion Diameter 40mm, Rotation CW, Voltage 24, Mount Cnt to Cnt 127mm, Starter Mount Type 2 Hole.

Additional published details for cross-checking include Weight 8.28kg, Product Group 1 ROTATING ELECTRICAL, Part No. DXS626, Brand DENSO, Description Denso Starter Motor 24V 10Th CW, Flange Diameter 89mm, Number of Teeth 10, Pinion at Rest 47mm, Power Rating 7.8kW, Suits Unit Make Denso.

Denso Starter Motor 24V 10Th CW. Part number DXS626 should be checked first. Listed voltage is 24. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number DXS626, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 24 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include BOART LONGYEAR LF160, BOART LONGYEAR LF160 2019, HITACHI ZW180PL-5B, HITACHI ZW180PL-5B 2015, HITACHI ZW220-5, HITACHI ZW220-5 2017. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Please confirm compatibility by matching part number DXS626, 24V, clockwise rotation, 10-tooth pinion, and the mounting dimensions against your existing starter and machine application before ordering.

FAQ

What is the part number for this starter motor?

The part number is DXS626. For this listing, part number DXS626 is the main reference point. Listed voltage is 24. Published fitment references include BOART LONGYEAR LF160, BOART LONGYEAR LF160 2019, HITACHI ZW180PL-5B. These details should still be checked against the original unit before ordering.

What voltage is this starter motor?

It is a 24V starter motor. For this listing, part number DXS626 is the main reference point. Listed voltage is 24. Published fitment references include BOART LONGYEAR LF160, BOART LONGYEAR LF160 2019, HITACHI ZW180PL-5B. These details should still be checked against the original unit before ordering.

Does this starter rotate clockwise or anti-clockwise?

This starter motor is clockwise rotation, shown as CW. For this listing, part number DXS626 is the main reference point. Listed voltage is 24. Published fitment references include BOART LONGYEAR LF160, BOART LONGYEAR LF160 2019, HITACHI ZW180PL-5B. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

The pinion has 10 teeth. For this listing, part number DXS626 is the main reference point. Listed voltage is 24. Published fitment references include BOART LONGYEAR LF160, BOART LONGYEAR LF160 2019, HITACHI ZW180PL-5B. These details should still be checked against the original unit before ordering.

Is this a new or remanufactured unit?

It is listed as new. For this listing, part number DXS626 is the main reference point. Listed voltage is 24. Published fitment references include BOART LONGYEAR LF160, BOART LONGYEAR LF160 2019, HITACHI ZW180PL-5B. These details should still be checked against the original unit before ordering.

What vehicles or machines is it shown against?

It is shown against Boart Longyear LF160, Hitachi ZW180PL-5B, Hitachi ZW220-5, and Tigercat models including 615C, 630D, 635D, 718E, 724D, 726E, and M726E, with some year-specific applications listed as well. For this listing, part number DXS626 is the main reference point. Listed voltage is 24. Published fitment references include BOART LONGYEAR LF160, BOART LONGYEAR LF160 2019, HITACHI ZW180PL-5B. These details should still be checked against the original unit before ordering.