OEX Air Conditioning Compressor 12V 7PV Direct Mount Denso 10S17C Style CXD0098

The OEX air conditioning compressor listed here is a 12V unit with a 7 groove pulley, direct mount compressor mounting and pad fitting type. It is described as a Denso 10S17C style compressor, with part number CXD0098, and is supplied r conditioning compressor each.

Key service details include a 120mm clutch diameter, 150ml oil capacity and PAG46 oil type. These are important points to check before ordering, especially if you are matching an existing compressor or confirming the replacement against the vehicle's air conditioning setup.

The supplied application information notes suitability for Toyota Previa 2000 and also includes Toyota Tarago / Estima references within the fitment data. As with any compressor purchase, the part number, mounting style and pulley arrangement should be matched carefully before fitment.

This compressor carries a two year warranty and sits in the OEX range under part number CXD0098. If you are replacing a failed unit, it is sensible to compare the existing compressor style, clutch size and belt groove count to make sure the replacement aligns with the vehicle already fitted.

Key Features

• 12V air conditioning compressor
• 7 groove pulley
• Direct mount compressor
• Pad fitting type
• Denso 10S17C style
• 120mm clutch diameter

Specifications

• Brand: OEX
• Product type: Air conditioning compressor
• Unit of measure: Each
• Voltage: 12V
• Compressor mounting: Direct mount
• Pulley section: 7 groove
• Suits unit make: Denso
• Series: 10S17C

Confirmed fitment information

• Toyota Previa 2000
• Toyota Tarago
• Toyota Tarago / Estima
• Toyota Tarago / Estima 1990
• Toyota Tarago / Estima 1991
• Toyota Tarago / Estima 1992
• Toyota Tarago / Estima 1993
• Toyota Tarago / Estima 1994

Application and Buying Notes

Before ordering, check the compressor against the vehicle already fitted and compare the part number CXD0098, the 12V operating voltage and the direct mount, pad fitting arrangement. Those details are the most reliable starting points when matching an air conditioning compressor, because a close visual match is not enough on its own.

The 7 groove pulley section and 120mm clutch diameter are practical fitment checks, especially if you are replacing a worn unit and want the belt drive and clutch size to line up correctly. If the pulley section or clutch diameter differs from the existing compressor, it is worth stopping and rechecking before purchase.

This compressor is identified as Denso 10S17C style and suited to Denso applications, so it is best matched by comparing the existing unit style and application details rather than assuming interchangeability from vehicle model alone. The fitment data includes Toyota Tarago and Tarago / Estima references, as well as Toyota Previa 2000, but the final check should always be made against the exact vehicle and the compressor on the car.

If you are replacing an air conditioning compressor after a failure, inspect the old unit for mounting type, pulley groove count and clutch size before the new part is fitted. A correct part number and matching physical details reduce the chance of delays once the vehicle is apart and the system is ready for installation.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number CXD0098 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type AIR CONDITIONING COMPRESSOR, Unit of Measure EACH, Warranty Two Years, Compressor Mounting Direct Mount, Pulley Section 7 Groove, Suits Unit Make Denso, Note Oil type PAG46., Product Group 2 AC COMPONENTS, Part No. CXD0098.

Additional published details for cross-checking include Brand OEX, Description OEX Air Conditioning Compressor 12V 7PV Direct Mount Denso 10S17C Style, Clutch Diameter 120mm, Fitting Type Pad, Series 10S17C, Voltage 12, Oil Capacity 150ml, Product Group 1 COOLING.

OEX Air Conditioning Compressor 12V 7PV Direct Mount Denso 10S17C Style. Part number CXD0098 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Pulley configuration is 7 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number CXD0098, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a air conditioning compressor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Please confirm fitment using part number CXD0098, the 12V direct mount, pad fitting configuration, and the 7 groove pulley details against your existing compressor and vehicle application before purchase.

FAQ

What is the part number for this compressor?

The part number supplied is CXD0098. For this listing, part number CXD0098 is the main reference point. Listed voltage is 12. Published fitment references include TOYOTA TARAGO, TOYOTA TARAGO / ESTIMA, TOYOTA TARAGO / ESTIMA 1990. These details should still be checked against the original unit before ordering.

What voltage is this compressor?

It is a 12V air conditioning compressor. For this listing, part number CXD0098 is the main reference point. Listed voltage is 12. Published fitment references include TOYOTA TARAGO, TOYOTA TARAGO / ESTIMA, TOYOTA TARAGO / ESTIMA 1990. These details should still be checked against the original unit before ordering.

What type of mounting does it use?

It is listed as a direct mount compressor with pad fitting type. For this listing, part number CXD0098 is the main reference point. Listed voltage is 12. Published fitment references include TOYOTA TARAGO, TOYOTA TARAGO / ESTIMA, TOYOTA TARAGO / ESTIMA 1990. These details should still be checked against the original unit before ordering.

What pulley section does it have?

The compressor has a 7 groove pulley section. For this listing, part number CXD0098 is the main reference point. Listed voltage is 12. Published fitment references include TOYOTA TARAGO, TOYOTA TARAGO / ESTIMA, TOYOTA TARAGO / ESTIMA 1990. These details should still be checked against the original unit before ordering.

What oil type is specified?

The specified oil type is PAG46, with an oil capacity of 150ml. For this listing, part number CXD0098 is the main reference point. Listed voltage is 12. Published fitment references include TOYOTA TARAGO, TOYOTA TARAGO / ESTIMA, TOYOTA TARAGO / ESTIMA 1990. These details should still be checked against the original unit before ordering.

Which vehicles are listed in the fitment information?

The fitment information includes Toyota Previa 2000, Toyota Tarago, and Toyota Tarago / Estima references, including 1990 through 1999 entries in the supplied fitment data. For this listing, part number CXD0098 is the main reference point. Listed voltage is 12. Published fitment references include TOYOTA TARAGO, TOYOTA TARAGO / ESTIMA, TOYOTA TARAGO / ESTIMA 1990. These details should still be checked against the original unit before ordering.