Denso Starter Motor 12V 3KW 11 Tooth CW DXS629

The Denso starter motor listed here is a new 12V unit with a 3kW power rating, 11 teeth, clockwise rotation, and part number DXS629. It is described as an OE product and suits Denso units, so matching the part number and key dimensions is the safest way to confirm the correct replacement before ordering.

Key physical checks for this starter motor include a 2-hole starter mount, 127mm mount centres, an 89mm flange diameter, 11mm mount hole diameter, and an overall length of 275mm. The pinion diameter is 40mm and the pinion sits 48mm at rest, which are important measurements when comparing against the original unit.

This starter motor is supplied new, not remanufactured, and carries a one year warranty. For buyers replacing an existing Denso starter, the combination of 12V, clockwise rotation, 11 teeth, and DXS629 gives a clear reference point, but those details still need to be checked against the vehicle’s original starter before fitment is assumed.

Key Features

• New Denso starter motor
• 12V electrical system
• 3kW power rating
• 11-tooth pinion
• Clockwise rotation
• 2-hole starter mount

Specifications

• Brand: DENSO
• Part No.: DXS629
• Product Type: Starter Motor
• Voltage: 12V
• Power Rating: 3kW
• Rotation: CW
• Number of Teeth: 11
• Starter Mount Type: 2 Hole

Application and Buying Notes

The most reliable way to confirm fitment is to compare the part number DXS629 with the removed starter motor, then check the physical details as well. The 12V rating, 3kW output, 11 teeth, clockwise rotation, and 2-hole mount must all line up with the application already on the vehicle.

Mounting dimensions matter just as much as the electrical details. Confirm the 127mm mount centres, 89mm flange diameter, 11mm mount hole diameter, 275mm overall length, and 40mm pinion diameter before ordering, especially where access is tight or the starter sits close to brackets, housings, or exhaust components.

Because this is listed as an OE product and suits Denso units, it is best treated as a direct-match replacement only when the existing starter specifications agree. If the old unit has been changed previously, measure the starter and compare the label details rather than relying on vehicle assumptions alone.

The pinion at rest measurement of 48mm can be useful when checking clearance and comparing like-for-like assemblies. If you are unsure, remove the old starter and verify the mounting pattern, tooth count, rotation, and dimensions side by side before fitting the new unit.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number DXS629 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty One Year, Mount Centres A 127mm, Number of Teeth 11, Pinion at Rest 48mm, Power Rating 3kW, Suits Unit Make Denso, Item Type Starter Motor, Starter Mount Type 2 Hole.

Additional published details for cross-checking include Product Group 2 STARTER MOTORS, Part No. DXS629, Brand DENSO, Description Denso Starter Motor 12V 11Th CW, Flange Diameter 89mm, Mount Hole Diameter 11, Overall Length 275mm, Pinion Diameter 40mm, Rotation CW.

Denso Starter Motor 12V 11Th CW. Part number DXS629 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number DXS629, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Where no verified application list is available, the part number, mounting details, connector style, and published specifications should be used as the primary selection criteria.

In the absence of a verified fitment list, the safest approach is to compare the removed unit directly with the listed product details. That includes checking the housing style, pulley layout, regulator arrangement, and any visible identification numbers before supply is approved.

Compatibility note: Confirm compatibility by matching Denso part number DXS629 and checking the 12V, 11-tooth, clockwise, 2-hole starter mount, and listed dimensions against the original unit before purchase.

FAQ

What is the part number for this starter motor?

The part number is DXS629. For this listing, part number DXS629 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.

Is this starter motor new or remanufactured?

It is listed as new. For this listing, part number DXS629 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.

What voltage is this starter motor?

It is a 12V starter motor. For this listing, part number DXS629 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

The pinion has 11 teeth. For this listing, part number DXS629 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.

What rotation does this starter motor have?

It is clockwise rotation, shown as CW. For this listing, part number DXS629 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.

What warranty is supplied with this starter motor?

It carries a one year warranty. For this listing, part number DXS629 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.