OEX Alternator 12V 85A Mitsubishi Style MXA2086

The OEX Alternator MXA2086 is a new 12V, 85A unit built in Mitsubishi style and supplied as a twin leg alternator mount. It suits Mitsubishi applications and uses an internal regulator, with a 6 groove pulley and 55mm pulley outside diameter.

Key mounting dimensions for this alternator are 43mm inside mounting legs, a 10.5mm pivot hole diameter, an 8.5mm adjusting hole diameter, and 180mm mount centre to centre. Those measurements matter when matching the unit to the original alternator position and bracket layout.

The unit is identified with OEM number A5TG2691ZT-PO and part number MXA2086. It is a new rotating electrical component from OEX, backed by a 3 year passenger / 1 year commercial warranty.

Key Features

• New alternator, not remanufactured
• 12V output with 85A power rating
• Internal regulator
• 6 groove pulley
• Twin leg alternator mount
• Suits Mitsubishi applications

Specifications

• Brand: OEX
• Part No.: MXA2086
• OEM Number: A5TG2691ZT-PO
• Type: Alternator
• Voltage: 12V
• Power Rating: 85A
• Regulator Type: Internal
• Pulley Section: 6 groove

Fitment guidance

• Suits Mitsubishi applications
• Fitment preview includes Mitsubishi Mirage
• Fitment preview includes Mitsubishi Mirage 2012 through 2021

Application and Buying Notes

Before ordering, compare the part number MXA2086 and OEM number A5TG2691ZT-PO with the alternator you are replacing. The listed mounting pattern is specific: twin leg mount, 43mm inside mounting legs, 10.5mm pivot hole, 8.5mm adjusting hole, and 180mm mount centre to centre.

Check the pulley arrangement as well. This unit has a 6 groove pulley with a 55mm outside diameter, so it needs to match the belt style and belt line used on the vehicle. A mismatch here can stop the alternator from fitting or operating correctly.

The alternator is rated at 12V and 85A, with an internal regulator. Those are important details when matching to the vehicle's electrical system and charging setup. If the original unit differs in voltage, amperage, regulator type, or mount style, confirm suitability before purchase.

This part is listed as new and supplied as a single each unit. It carries a 3 year passenger / 1 year commercial warranty, but warranty does not replace the need to verify the application, mounting dimensions, and connector or pulley arrangement before fitting.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number MXA2086 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Inside Mounting Legs 43mm, Pivot Hole Diameter 10.5, Pulley Outside Diameter 55mm, Regulator Type Internal, Voltage 12, Mount Cnt to Cnt 180mm, OEM Number A5TG2691ZT-PO.

Additional published details for cross-checking include Product Group 1 ROTATING ELECTRICAL, Part No. MXA2086, Brand OEX, Description OEX Alternator 12V 85A Mitsubishi Style, Adjusting Hole Diameter 8.5, Pin Code IR70, Power Rating (Amp) 85, Pulley Section 6 Groove, Suits Unit Make Mitsubishi, Alternator Mount Twin Leg.

OEX Alternator 12V 85A Mitsubishi Style. Part number MXA2086 should be checked first. Listed voltage is 12. Listed output rating is 85. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Twin Leg. Regulator type is Internal. Pulley configuration is 6 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number MXA2086, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 85 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Confirm fitment by checking the part number MXA2086, OEM number A5TG2691ZT-PO, Mitsubishi application details, and all mounting and pulley measurements before ordering. If the existing alternator does not match the twin leg mount, 6 groove pulley, 12V 85A specification, or listed hole and centre dimensions, do not assume it will suit.

FAQ

What type of alternator is this?

It is a new OEX alternator, 12V and 85A, with an internal regulator and a 6 groove pulley. For this listing, part number MXA2086 is the main reference point. Listed voltage is 12. Listed output rating is 85. Published fitment references include MITSUBISHI MIRAGE, MITSUBISHI MIRAGE 2012, MITSUBISHI MIRAGE 2013. These details should still be checked against the original unit before ordering.

What part numbers should I check before buying?

Check part number MXA2086 and OEM number A5TG2691ZT-PO against the unit being replaced. For this listing, part number MXA2086 is the main reference point. Listed voltage is 12. Listed output rating is 85. Published fitment references include MITSUBISHI MIRAGE, MITSUBISHI MIRAGE 2012, MITSUBISHI MIRAGE 2013. These details should still be checked against the original unit before ordering.

What vehicle make does it suit?

It is listed as suiting Mitsubishi applications. For this listing, part number MXA2086 is the main reference point. Listed voltage is 12. Listed output rating is 85. Published fitment references include MITSUBISHI MIRAGE, MITSUBISHI MIRAGE 2012, MITSUBISHI MIRAGE 2013. These details should still be checked against the original unit before ordering.

Does this alternator have an internal or external regulator?

It has an internal regulator. For this listing, part number MXA2086 is the main reference point. Listed voltage is 12. Listed output rating is 85. Published fitment references include MITSUBISHI MIRAGE, MITSUBISHI MIRAGE 2012, MITSUBISHI MIRAGE 2013. These details should still be checked against the original unit before ordering.

What are the main mounting measurements?

The listed mounting details are twin leg mount, 43mm inside mounting legs, 10.5mm pivot hole diameter, 8.5mm adjusting hole diameter, and 180mm mount centre to centre. For this listing, part number MXA2086 is the main reference point. Listed voltage is 12. Listed output rating is 85. Published fitment references include MITSUBISHI MIRAGE, MITSUBISHI MIRAGE 2012, MITSUBISHI MIRAGE 2013. These details should still be checked against the original unit before ordering.

What warranty is supplied?

The warranty listed is 3 years for passenger use and 1 year for commercial use. For this listing, part number MXA2086 is the main reference point. Listed voltage is 12. Listed output rating is 85. Published fitment references include MITSUBISHI MIRAGE, MITSUBISHI MIRAGE 2012, MITSUBISHI MIRAGE 2013. These details should still be checked against the original unit before ordering.