OEX Air Conditioning Compressor 12V Direct Mount Valeo Style CXZ0034

The OEX Air Conditioning Compressor is a 12V unit with direct mount construction, Valeo style fitment, and part number CXZ0034. It is listed as a pad-to-pad fitting type with a 6 groove pulley section and a 114mm clutch diameter, so it is intended for applications that match those mounting and drive details.

This compressor is specified for Mazda CX-3 DK 2.0L applications from 2015 onward. The listed original equipment number is D09W-61450, and the compressor uses oil type RFL-100X with an oil capacity of 110ml. Those identifiers are the most practical points to check before ordering.

Because air conditioning compressors need to match both the vehicle application and the physical mounting arrangement, it is important to compare the direct mount style, 12V electrical specification, 6 groove pulley, and clutch diameter with the unit being replaced. Even when a vehicle model is similar, those details can differ between variants.

Key Features

• 12V air conditioning compressor
• Direct mount design
• Valeo style unit
• Pad-to-pad fitting type
• 6 groove pulley section
• 114mm clutch diameter

Specifications

• Brand: OEX
• Product type: Air conditioning compressor
• Part number: CXZ0034
• Original equipment number: D09W-61450
• Voltage: 12V
• Compressor mounting: Direct mount
• Suits unit make: Valeo
• Fitting type: Pad - Pad

Verified fitment guidance

• Mazda CX-3 DK 2.0L
• 2015 onward

Application and Buying Notes

Before ordering, compare the part number CXZ0034 and the original equipment number D09W-61450 with the compressor you are replacing. Those identifiers are the strongest checks when matching a climate control component, especially where the unit is described as Valeo style and direct mount.

The listed fitment is Mazda CX-3 DK 2.0L from 2015 onward, but that does not replace a vehicle-specific check. Confirm the pulley section is 6 groove, the clutch diameter is 114mm, and the fitting type is pad-to-pad so the replacement aligns with the existing hardware.

A compressor can look similar from the outside while still differing in mount design, pulley layout, or electrical specification. This unit is 12V and direct mount, so those details need to line up with the vehicle application and the removed part. If there is any uncertainty, use the original compressor details, not just the model name, to confirm suitability.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number CXZ0034 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type AIR CONDITIONING COMPRESSOR, Unit of Measure EACH, Warranty Two Years, Compressor Mounting Direct Mount, Original Equipment Number D09W-61450, Suits Unit Make Valeo, Note Oil type RFL-100X., Dust Cover Y/N No, Product Group 1 COOLING, Part No. CXZ0034.

Additional published details for cross-checking include Brand OEX, Description OEX Air Conditioning Compressor 12V Direct Mount Valeo Style, Clutch Diameter 114mm, Fitting Type Pad - Pad, Pulley Section 6 Groove, Voltage 12, Oil Capacity 110ml, Product Group 2 AC COMPONENTS.

OEX Air Conditioning Compressor 12V Direct Mount Valeo Style. Part number CXZ0034 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Pulley configuration is 6 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number CXZ0034, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a air conditioning compressor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include MAZDA CX-3, MAZDA CX-3 2015, MAZDA CX-3 2016, MAZDA CX-3 2017. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Please confirm fitment by matching part number CXZ0034, OE number D09W-61450, and the listed application details for Mazda CX-3 DK 2.0L from 2015 onward before purchase or installation.

FAQ

What vehicle is this compressor listed for?

It is listed for Mazda CX-3 DK 2.0L applications from 2015 onward. For this listing, part number CXZ0034 is the main reference point. Listed voltage is 12. Published fitment references include MAZDA CX-3, MAZDA CX-3 2015, MAZDA CX-3 2016. These details should still be checked against the original unit before ordering.

What is the part number?

The part number is CXZ0034. For this listing, part number CXZ0034 is the main reference point. Listed voltage is 12. Published fitment references include MAZDA CX-3, MAZDA CX-3 2015, MAZDA CX-3 2016. These details should still be checked against the original unit before ordering.

What is the original equipment number?

The listed original equipment number is D09W-61450. For this listing, part number CXZ0034 is the main reference point. Listed voltage is 12. Published fitment references include MAZDA CX-3, MAZDA CX-3 2015, MAZDA CX-3 2016. These details should still be checked against the original unit before ordering.

What are the key mounting details?

It is a direct mount compressor with pad-to-pad fitting, a 6 groove pulley section, and a 114mm clutch diameter. For this listing, part number CXZ0034 is the main reference point. Listed voltage is 12. Published fitment references include MAZDA CX-3, MAZDA CX-3 2015, MAZDA CX-3 2016. These details should still be checked against the original unit before ordering.

What oil does it use?

The listed oil type is RFL-100X, and the oil capacity is 110ml. For this listing, part number CXZ0034 is the main reference point. Listed voltage is 12. Published fitment references include MAZDA CX-3, MAZDA CX-3 2015, MAZDA CX-3 2016. These details should still be checked against the original unit before ordering.

Does it come with a warranty?

Yes. The listed warranty is two years. For this listing, part number CXZ0034 is the main reference point. Listed voltage is 12. Published fitment references include MAZDA CX-3, MAZDA CX-3 2015, MAZDA CX-3 2016. These details should still be checked against the original unit before ordering.