OEX Starter Motor 24V 11TH CW Mitsubishi Style MXS9615

The OEX Starter Motor MXS9615 is a 24V unit with 11 teeth, clockwise rotation, and a 4.5kW power rating. It is listed as a new starter motor in a Mitsubishi style configuration, with a 3 hole starter mount and a dry clutch setup.

Key dimensions provided for checking application include a 105mm flange diameter, 136mm mount centres A, 111mm mount centres C, 109mm mount centres B, and a 13mm mount hole diameter. The overall length is 285mm, the pinion diameter is 40mm, and the pinion at rest measures 34mm.

This starter motor is part number MXS9615 and suits unit make Mitsubishi. It is sold individually as each and carries a 3yr Passenger 1yr Commercial warranty. At 7.32kg, it is a substantial rotating electrical component that should be matched carefully to the original unit before fitting.

OEX states that its products are sourced from market leading Original Equipment Manufacturers and Aftermarket Suppliers, with sourcing from ISO certified factories. For buyers comparing replacement starters, the most important checks here are voltage, tooth count, rotation, mounting pattern, and the physical dimensions listed above.

Key Features

• 24V starter motor
• 11 tooth pinion
• Clockwise rotation
• 4.5kW power rating
• New unit
• 3 hole starter mount

Specifications

• Part No.: MXS9615
• Brand: OEX
• Product Type: Starter Motor
• Voltage: 24
• Rotation: CW
• Number of Teeth: 11
• Power Rating: 4.5kW
• Starter Mount Type: 3 Hole

Fitment guidance

• Suits unit make Mitsubishi
• Fitment data is provided for applications including International, Kobelco, and UD Nissan Diesel
• Listed application families include International N-Series, Kobelco LK500, and UD Nissan Diesel C Series, MK Series, and R Series

Application and Buying Notes

Before ordering, confirm that your original starter matches the 24V specification, 11 tooth pinion, clockwise rotation, and 3 hole mounting pattern. These points matter just as much as the part number MXS9615, especially where the vehicle has had earlier repairs or where several starter variants were used across a model range.

The mounting measurements are the most practical way to check physical compatibility. Compare the 105mm flange diameter, 136mm mount centres A, 111mm mount centres C, 109mm mount centres B, and 13mm mount hole diameter against the removed unit. If any of those dimensions differ, do not assume the starter will bolt straight on.

The overall length of 285mm, 40mm pinion diameter, and 34mm pinion at rest are useful checks when clearance is tight around the bell housing or engine side. These dimensions also help distinguish similar-looking starters that may share the same voltage but differ in housing or drive arrangement.

Because the listed fitment includes International, Kobelco, and UD Nissan Diesel applications, it is sensible to verify the exact application against your existing starter and vehicle details rather than relying on the make name alone. The safest approach is to match the part number MXS9615, the Mitsubishi unit make reference, and the physical dimensions before purchase.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number MXS9615 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Mount Centres A 136mm, Mount Centres C 111mm, Number of Teeth 11, Pinion at Rest 34mm, Power Rating 4.5kW, Suits Unit Make Mitsubishi, New / Reman. New.

Additional published details for cross-checking include Wet / Dry Clutch Dry, Product Group 2 STARTER MOTORS, Part No. MXS9615, Brand OEX, Description OEX Starter Motor 24V 11Th CW Mitsubishi Style, Flange Diameter 105mm, Mount Centres B 109mm, Mount Hole Diameter 13, Overall Length 285mm.

OEX Starter Motor 24V 11Th CW Mitsubishi Style. Part number MXS9615 should be checked first. Listed voltage is 24. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number MXS9615, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 24 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include INTERNATIONAL N-SERIES, INTERNATIONAL N-SERIES 1983, INTERNATIONAL N-SERIES 1984, INTERNATIONAL N-SERIES 1985, KOBELCO LK500, KOBELCO LK500 1983. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Confirm fitment by matching part number MXS9615, the 24V clockwise 11 tooth configuration, and the mounting and dimension details against your original starter before ordering.

FAQ

What is the part number for this starter motor?

The part number is MXS9615. For this listing, part number MXS9615 is the main reference point. Listed voltage is 24. Published fitment references include INTERNATIONAL N-SERIES, INTERNATIONAL N-SERIES 1983, INTERNATIONAL N-SERIES 1984. These details should still be checked against the original unit before ordering.

What voltage is this starter motor?

It is a 24V starter motor. For this listing, part number MXS9615 is the main reference point. Listed voltage is 24. Published fitment references include INTERNATIONAL N-SERIES, INTERNATIONAL N-SERIES 1983, INTERNATIONAL N-SERIES 1984. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

The pinion has 11 teeth. For this listing, part number MXS9615 is the main reference point. Listed voltage is 24. Published fitment references include INTERNATIONAL N-SERIES, INTERNATIONAL N-SERIES 1983, INTERNATIONAL N-SERIES 1984. These details should still be checked against the original unit before ordering.

What rotation does this starter motor use?

It is clockwise rotation, listed as CW. For this listing, part number MXS9615 is the main reference point. Listed voltage is 24. Published fitment references include INTERNATIONAL N-SERIES, INTERNATIONAL N-SERIES 1983, INTERNATIONAL N-SERIES 1984. These details should still be checked against the original unit before ordering.

What mounting type does it use?

It is listed as a 3 hole starter mount. For this listing, part number MXS9615 is the main reference point. Listed voltage is 24. Published fitment references include INTERNATIONAL N-SERIES, INTERNATIONAL N-SERIES 1983, INTERNATIONAL N-SERIES 1984. These details should still be checked against the original unit before ordering.

What warranty is listed?

The listed warranty is 3yr Passenger 1yr Commercial. For this listing, part number MXS9615 is the main reference point. Listed voltage is 24. Published fitment references include INTERNATIONAL N-SERIES, INTERNATIONAL N-SERIES 1983, INTERNATIONAL N-SERIES 1984. These details should still be checked against the original unit before ordering.