OEX Alternator 12V 150A Mitsubishi Style - MXA2093

The OEX MXA2093 is a new 12V alternator rated at 150A, built in a Mitsubishi style with an internal regulator and a twin leg mount. It suits Mitsubishi applications, but the listing note is important: there are two identical-looking alternators with different regulator functions, so OE number confirmation is needed before purchase.

Key identifying details include part number MXA2093, pin code IR219, 51mm pulley outside diameter, and 44mm inside mounting legs. The unit has a clockwise rotation, insulated return set to No, and an adjuster hole size of M10 x 1.25, which helps when comparing the physical unit against the vehicle-side arrangement.

This alternator is supplied as a new unit and weighs 7.2kg. For buyers comparing replacement charging units, the most useful checks are the voltage, amperage, mount style, regulator type, and OE number match, especially where visually similar alternators can differ in function even when the casing and mounting look the same.

Key Features

• 12V alternator with 150A output
• Mitsubishi style with internal regulator
• Twin leg alternator mount
• Clockwise rotation
• New unit, part number MXA2093
• Pin code IR219

Specifications

• Brand: OEX
• Product type: Alternator
• Part number: MXA2093
• Voltage: 12V
• Power rating: 150A
• Regulator type: Internal
• Suits unit make: Mitsubishi
• Rotation: CW

Fitment guidance

• MAZDA: 6, 6 2012, 6 2013, 6 2014, 6 2015, plus other listed applications

Application and Buying Notes

Before ordering, compare the part number MXA2093 and the OE number from the vehicle or old unit, because this Mitsubishi style alternator is one of two identical-looking versions with different regulator functions. That warning matters more than appearance alone, especially when the housing, mount pattern, and pulley size can look very close between variants.

Check the electrical and mechanical details together: 12V system voltage, 150A output, internal regulator, clockwise rotation, 51mm pulley outside diameter, and 44mm inside mounting legs. A close visual match is not enough if the regulator function or mount layout differs, so it is worth confirming the unit against the original alternator and the vehicle’s charging system arrangement.

The twin leg mount and M10 x 1.25 mounting details are useful checkpoints when matching the replacement to the existing bracketry. The 7.2kg weight is also a practical reference when comparing the old unit to the replacement, particularly if there is any doubt about whether the current alternator is the same style or a related variant.

For buyers working from a worn or unreadable original part, the safest approach is to verify the OE number, pin code IR219, and the mounting measurements before fitting. That gives a much better chance of matching the correct alternator than relying on case shape alone, especially on applications where similar charging units have been used across more than one variation.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number MXA2093 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Inside Mounting Legs 44mm, Pin Code IR219, Pulley Outside Diameter 51mm, Rotation CW, Voltage 12, Alternator Mount Twin Leg, Insulated Return No.

Additional published details for cross-checking include Product Group 2 ALTERNATORS, Part No. MXA2093, Brand OEX, Description OEX Alternator 12V 150A Mitsubishi Style - Confirm by OE number, Adjusting Hole Diameter M10 x 1.25, Mount Hole Diameter 10.5/M10 x1.25, Power Rating (Amp) 150, Regulator Type Internal, Suits Unit Make Mitsubishi.

OEX Alternator 12V 150A Mitsubishi Style - Confirm by OE number. Part number MXA2093 should be checked first. Listed voltage is 12. Listed output rating is 150. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Twin Leg. Regulator type is Internal. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number MXA2093, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 150 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Confirm fitment by OE number and application details before purchase. This OEX MXA2093 alternator is Mitsubishi style, 12V, 150A, internal regulator, twin leg mount, and there are two identical-looking versions with different regulator functions.

FAQ

What is the part number for this alternator?

The part number is MXA2093. For this listing, part number MXA2093 is the main reference point. Listed voltage is 12. Listed output rating is 150. Published fitment references include MAZDA 6, MAZDA 6 2012, MAZDA 6 2013. These details should still be checked against the original unit before ordering.

What voltage and output does it have?

It is a 12V alternator rated at 150A. For this listing, part number MXA2093 is the main reference point. Listed voltage is 12. Listed output rating is 150. Published fitment references include MAZDA 6, MAZDA 6 2012, MAZDA 6 2013. These details should still be checked against the original unit before ordering.

What type of regulator does it use?

This alternator has an internal regulator. For this listing, part number MXA2093 is the main reference point. Listed voltage is 12. Listed output rating is 150. Published fitment references include MAZDA 6, MAZDA 6 2012, MAZDA 6 2013. These details should still be checked against the original unit before ordering.

What mounting style does it use?

It uses a twin leg alternator mount, with inside mounting legs of 44mm. For this listing, part number MXA2093 is the main reference point. Listed voltage is 12. Listed output rating is 150. Published fitment references include MAZDA 6, MAZDA 6 2012, MAZDA 6 2013. These details should still be checked against the original unit before ordering.

What should I confirm before buying?

Confirm the OE number and compare the regulator function, because there are two identical-looking alternators with different regulator functions. For this listing, part number MXA2093 is the main reference point. Listed voltage is 12. Listed output rating is 150. Published fitment references include MAZDA 6, MAZDA 6 2012, MAZDA 6 2013. These details should still be checked against the original unit before ordering.

Is this a new or remanufactured unit?

It is a new alternator. For this listing, part number MXA2093 is the main reference point. Listed voltage is 12. Listed output rating is 150. Published fitment references include MAZDA 6, MAZDA 6 2012, MAZDA 6 2013. These details should still be checked against the original unit before ordering.