OEX Alternator 12V 130A Denso Style DXA4113

The OEX Alternator DXA4113 is a new 12V alternator with a 130A power rating, built in a Denso style configuration for vehicles that use a Denso unit and a pad mount arrangement. It is a 7 groove pulley design with a 60mm pulley outside diameter, CW rotation, and an internal regulator.

This alternator is supplied as a new rotating electrical unit, not remanufactured, and weighs 6kg. The unit is listed with insulated return: no, which is an important compatibility checkpoint when comparing it to the original alternator in the vehicle.

OEX identifies this unit under part number DXA4113 and pin code IR199. The product is backed by a 3yr Passenger 1yr Commercial warranty, so it is a practical replacement option where the application details match the vehicle’s original charging system requirements.

Key Features

• 12V alternator with 130A output
• Denso style unit
• New, not remanufactured
• Internal regulator
• 7 groove pulley
• CW rotation

Specifications

• Brand: OEX
• Part No.: DXA4113
• Pin Code: IR199
• Type: Alternator
• Unit of measure: Each
• Voltage: 12
• Power rating: 130A
• Pulley section: 7 groove

Fitment guidance

• Verified application information includes HONDA CR-V.
• Sample applications listed include HONDA CR-V 2012, 2013, 2014, 2015, 2016, 2017 and 2018.
• Fitment is only suitable where the vehicle matches the Denso style, 12V, 130A, 7 groove pulley, CW rotation, pad mount, and internal regulator requirements.
• Confirm the original part number and alternator details before ordering.

Application and Buying Notes

When checking whether DXA4113 is the correct alternator, start with the basics: 12V system voltage, 130A output, Denso style construction, and the pad mount design. Those details need to line up with the vehicle’s original charging system before the unit should be considered a match.

The pulley setup matters as well. This alternator uses a 7 groove pulley with a 60mm outside diameter and CW rotation. If the vehicle’s original alternator differs in pulley section, rotation, or mounting style, it should not be assumed to fit without checking the vehicle’s existing unit or catalogue application.

The internal regulator and insulated return: no specification are also important. These features can affect electrical compatibility, so compare them carefully against the removed alternator or the vehicle application details. A quick visual check of the old unit can save time and avoid an incorrect purchase.

OEX lists this as a new alternator, weighing 6kg, and supplies it with a 3yr Passenger 1yr Commercial warranty. That gives you a clear replacement option, but the final decision should still be based on the part number DXA4113, the Denso unit make, and the exact vehicle application rather than the listing title alone.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number DXA4113 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Power Rating (Amp) 130, Pulley Section 7 Groove, Rotation CW, Voltage 12, New / Reman. New, Weight 6kg, Product Group 1 ROTATING ELECTRICAL.

Additional published details for cross-checking include Part No. DXA4113, Brand OEX, Description OEX Alternator 12V 130A Denso Style, Pin Code IR199, Pulley Outside Diameter 60mm, Regulator Type Internal, Suits Unit Make Denso, Alternator Mount Pad, Insulated Return No.

OEX Alternator 12V 130A Denso Style. Part number DXA4113 should be checked first. Listed voltage is 12. Listed output rating is 130. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Pad. Regulator type is Internal. Pulley configuration is 7 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number DXA4113, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 130 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Please confirm fitment by matching part number DXA4113, the Denso style application, and the vehicle’s original alternator details before ordering. If the existing unit does not match the 12V, 130A, 7 groove, CW, pad mount, internal regulator specification set, do not assume compatibility.

FAQ

What is the part number for this alternator?

The part number is DXA4113. It is also identified with pin code IR199. For this listing, part number DXA4113 is the main reference point. Listed voltage is 12. Listed output rating is 130. Published fitment references include HONDA CR-V, HONDA CR-V 2012, HONDA CR-V 2013. These details should still be checked against the original unit before ordering.

Is this alternator new or remanufactured?

It is new, not remanufactured. For this listing, part number DXA4113 is the main reference point. Listed voltage is 12. Listed output rating is 130. Published fitment references include HONDA CR-V, HONDA CR-V 2012, HONDA CR-V 2013. These details should still be checked against the original unit before ordering.

What voltage and output does it have?

It is a 12V alternator with a 130A power rating. For this listing, part number DXA4113 is the main reference point. Listed voltage is 12. Listed output rating is 130. Published fitment references include HONDA CR-V, HONDA CR-V 2012, HONDA CR-V 2013. These details should still be checked against the original unit before ordering.

What pulley setup does it use?

It has a 7 groove pulley with a 60mm pulley outside diameter. For this listing, part number DXA4113 is the main reference point. Listed voltage is 12. Listed output rating is 130. Published fitment references include HONDA CR-V, HONDA CR-V 2012, HONDA CR-V 2013. These details should still be checked against the original unit before ordering.

Does it have an internal regulator?

Yes. The regulator type is internal. For this listing, part number DXA4113 is the main reference point. Listed voltage is 12. Listed output rating is 130. Published fitment references include HONDA CR-V, HONDA CR-V 2012, HONDA CR-V 2013. These details should still be checked against the original unit before ordering.

What fitment information is provided?

Verified application information includes HONDA CR-V, with sample applications listed for 2012 through 2018. Fitment should still be confirmed against the original alternator details and part number before purchase. For this listing, part number DXA4113 is the main reference point. Listed voltage is 12. Listed output rating is 130. Published fitment references include HONDA CR-V, HONDA CR-V 2012, HONDA CR-V 2013. These details should still be checked against the original unit before ordering.