OEX Alternator 12V 95A Mitsubishi Style MXA2096

The OEX Alternator MXA2096 is a 12V, 95A unit in Mitsubishi style, supplied new and sold each. It is set up with an internal regulator, clockwise rotation and a 6 groove pulley, so it is important to match those details to the vehicle’s charging system before ordering.

This alternator uses a twin leg mount with 66mm inside mounting legs and a 10mm pivot hole diameter. The adjusting hole is M8 x 1.25, and the pulley outside diameter is 65mm. Those mounting and pulley measurements are the quickest checks for confirming whether the unit will physically suit the application.

OEX lists this alternator under part number MXA2096 and pin code IR70. It is a 12 volt, 95 amp rotating electrical unit with an insulated return of No and a listed weight of 5.7kg, which gives a practical reference point when comparing to the original part.

The unit is covered by a 3yr Passenger 1yr Commercial warranty. OEX also states that its alternator range is backed by quality-focused manufacturing, with ISO9001 certified factories supporting engineering, testing and quality control procedures.

Key Features

• 12V alternator rated at 95A
• Mitsubishi style unit
• Part number MXA2096
• Internal regulator
• Twin leg alternator mount
• 6 groove pulley

Specifications

• Brand: OEX
• Product type: Alternator
• Voltage: 12V
• Power rating: 95A
• Part No.: MXA2096
• Pin code: IR70
• Pulley outside diameter: 65mm
• Pulley section: 6 groove

Known application details

• Mitsubishi
• Mitsubishi Pajero Sport
• Mitsubishi Pajero Sport 2015

Application and Buying Notes

Before buying, compare the part number MXA2096 and the Mitsubishi style description with the alternator already fitted to the vehicle. The most important matching points here are 12V, 95A, internal regulator, clockwise rotation, twin leg mount, 66mm inside mounting legs, 10mm pivot hole diameter and 6 groove pulley section.

If the original alternator differs in mount style, pulley section, pulley diameter or regulator type, the replacement may not suit even if the unit looks similar. The listed pulley outside diameter is 65mm and the adjusting hole is M8 x 1.25, so those measurements are worth checking carefully before purchase.

This alternator is listed for Mitsubishi and Mitsubishi Pajero Sport applications, including a Mitsubishi Pajero Sport 2015 reference in the supplied fitment information. Use that as a guide only, and confirm the vehicle’s charging system details against the part number and physical measurements rather than relying on appearance alone.

The unit is new, weighs 5.7kg and has insulated return set to No. Those details can help when comparing against an old unit, but the safest buying approach is still to verify the vehicle match, connector arrangement, mount pattern and belt configuration before fitting.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number MXA2096 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Inside Mounting Legs 66mm, Pivot Hole Diameter 10, Pulley Outside Diameter 65mm, Regulator Type Internal, Suits Unit Make Mitsubishi, Alternator Mount Twin Leg, Insulated Return No.

Additional published details for cross-checking include Product Group 2 ALTERNATORS, Part No. MXA2096, Brand OEX, Description OEX Alternator 12V 95A Mitsubishi Style, Adjusting Hole Diameter M8 x 1.25, Pin Code IR70, Power Rating (Amp) 95, Pulley Section 6 Groove, Rotation CW.

OEX Alternator 12V 95A Mitsubishi Style. Part number MXA2096 should be checked first. Listed voltage is 12. Listed output rating is 95. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Twin Leg. Regulator type is Internal. Pulley configuration is 6 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number MXA2096, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 95 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Please confirm fitment using part number MXA2096, the Mitsubishi style application details and the measured mounting and pulley specifications before ordering. Vehicle compatibility should always be checked against the existing alternator, not assumed from appearance alone.

FAQ

What is the part number for this alternator?

The part number is MXA2096. For this listing, part number MXA2096 is the main reference point. Listed voltage is 12. Listed output rating is 95. Published fitment references include MITSUBISHI PAJERO SPORT, MITSUBISHI PAJERO SPORT 2015. These details should still be checked against the original unit before ordering.

What are the key electrical specifications?

It is a 12V alternator with a 95A power rating. For this listing, part number MXA2096 is the main reference point. Listed voltage is 12. Listed output rating is 95. Published fitment references include MITSUBISHI PAJERO SPORT, MITSUBISHI PAJERO SPORT 2015. These details should still be checked against the original unit before ordering.

What type of regulator does it use?

This unit uses an internal regulator. For this listing, part number MXA2096 is the main reference point. Listed voltage is 12. Listed output rating is 95. Published fitment references include MITSUBISHI PAJERO SPORT, MITSUBISHI PAJERO SPORT 2015. These details should still be checked against the original unit before ordering.

What mounting and pulley details are listed?

It has a twin leg mount, 66mm inside mounting legs, a 10mm pivot hole diameter, M8 x 1.25 adjusting hole and a 6 groove pulley with 65mm outside diameter. For this listing, part number MXA2096 is the main reference point. Listed voltage is 12. Listed output rating is 95. Published fitment references include MITSUBISHI PAJERO SPORT, MITSUBISHI PAJERO SPORT 2015. These details should still be checked against the original unit before ordering.

Which vehicles are listed in the fitment information?

The supplied fitment information lists Mitsubishi and Mitsubishi Pajero Sport, including a Mitsubishi Pajero Sport 2015 reference. For this listing, part number MXA2096 is the main reference point. Listed voltage is 12. Listed output rating is 95. Published fitment references include MITSUBISHI PAJERO SPORT, MITSUBISHI PAJERO SPORT 2015. These details should still be checked against the original unit before ordering.

What warranty is listed for this alternator?

The listed warranty is 3yr Passenger 1yr Commercial. For this listing, part number MXA2096 is the main reference point. Listed voltage is 12. Listed output rating is 95. Published fitment references include MITSUBISHI PAJERO SPORT, MITSUBISHI PAJERO SPORT 2015. These details should still be checked against the original unit before ordering.