Genuine Products Starter Motor 12V 11 Tooth CW For Autolite - Part JB3Z11002B

This Genuine Products starter motor is a 12V unit with 11 teeth, clockwise cranking rotation, and a pad mount design. It is listed for Autolite units and carries part number JB3Z11002B, with a pinion at rest of 25mm, overall length of 243mm, and a 35mm pinion diameter.

It is a new starter motor sold each, with a one year warranty. The listed weight is 4.3kg, the mount hole diameter is 10mm, and the mount centre to centre measurement is 89mm. These measurements are useful when checking the physical fit against the original unit before ordering.

The stated features include original equipment fitment intent, a 12V 11 tooth flywheel setup, clockwise cranking rotation, and minimal moving internals. It is also clearly noted as not suitable for stop start applications, so the application should be checked carefully before purchase.

Key Features

• 12V starter motor
• 11 tooth flywheel engagement
• Clockwise cranking rotation
• Pad mount starter type
• New unit, sold each
• Not suitable for stop start applications

Specifications

• Part number: JB3Z11002B
• Brand: Genuine Products
• Suits unit make: Autolite
• Voltage: 12V
• Number of teeth: 11
• Pinion at rest: 25mm
• Pinion diameter: 35mm
• Overall length: 243mm

Checked fitment details

• Suits unit make: Autolite
• Fitment preview includes Ford Ranger applications across model years 2011 to 2021
• Fitment should still be confirmed against the vehicle application and original part number before purchase

Application and Buying Notes

When comparing this starter motor to the part already on the vehicle, check the part number JB3Z11002B first, then confirm the 12V rating, 11 tooth count, clockwise rotation, and pad mount style. The physical measurements matter as well, including the 243mm overall length, 89mm mount centre to centre, 10mm mount hole diameter, and 35mm pinion diameter.

The listing states this unit suits Autolite and shows Ford Ranger applications in the fitment preview, but the safest approach is to match the original starter against the same identifiers on the vehicle. If the original unit is different in tooth count, rotation, mount type, or dimensions, it should not be assumed compatible.

This starter is noted as not suitable for stop start applications, so that system type must be checked before ordering. The unit is new, weighs 4.3kg, and is sold with a one year warranty, which are useful reference points when assessing replacement timing and handling.

If you are comparing alternatives, keep the concrete identifiers together: JB3Z11002B, 12V, 11 teeth, CW rotation, pad mount, 25mm pinion at rest, and the 243mm length. Those details are the most reliable way to narrow the match without relying on guesswork.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number JB3Z11002B helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty One Year, Number of Teeth 11, Pinion at Rest 25mm, Rotation CW, Voltage 12, Item Type Starter Motor, New / Reman. New, Wet / Dry Clutch Dry.

Additional published details for cross-checking include Product Group 2 STARTER MOTORS, Part No. JB3Z11002B, Brand GENUINE PRODUCTS, Description Genuine Starter Motor 12V 11Th CW Autolite, Mount Hole Diameter 10, Overall Length 243mm, Pinion Diameter 35mm, Suits Unit Make Autolite, Note NOT SUITABLE FOR STOP START APPLICATIONS.

Genuine Starter Motor 12V 11Th CW Autolite. Part number JB3Z11002B should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number JB3Z11002B, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include FORD RANGER, FORD RANGER 2011, FORD RANGER 2012, FORD RANGER 2013. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Please confirm fitment by matching part number JB3Z11002B, the Autolite application, and all relevant measurements and mounting details against the original starter before ordering.

FAQ

What is the part number for this starter motor?

The listed part number is JB3Z11002B. For this listing, part number JB3Z11002B is the main reference point. Listed voltage is 12. Published fitment references include FORD RANGER, FORD RANGER 2011, FORD RANGER 2012. These details should still be checked against the original unit before ordering.

What voltage is this starter motor?

It is a 12V starter motor. For this listing, part number JB3Z11002B is the main reference point. Listed voltage is 12. Published fitment references include FORD RANGER, FORD RANGER 2011, FORD RANGER 2012. These details should still be checked against the original unit before ordering.

How many teeth does the flywheel engagement have?

It has 11 teeth. For this listing, part number JB3Z11002B is the main reference point. Listed voltage is 12. Published fitment references include FORD RANGER, FORD RANGER 2011, FORD RANGER 2012. These details should still be checked against the original unit before ordering.

What direction does it crank?

It is clockwise cranking rotation, shown as CW. For this listing, part number JB3Z11002B is the main reference point. Listed voltage is 12. Published fitment references include FORD RANGER, FORD RANGER 2011, FORD RANGER 2012. These details should still be checked against the original unit before ordering.

What type of mounting does it use?

It is a pad mount starter motor. For this listing, part number JB3Z11002B is the main reference point. Listed voltage is 12. Published fitment references include FORD RANGER, FORD RANGER 2011, FORD RANGER 2012. These details should still be checked against the original unit before ordering.

Is this starter suitable for stop start vehicles?

No. It is specifically noted as not suitable for stop start applications. For this listing, part number JB3Z11002B is the main reference point. Listed voltage is 12. Published fitment references include FORD RANGER, FORD RANGER 2011, FORD RANGER 2012. These details should still be checked against the original unit before ordering.