OEX Air Conditioning Compressor 12V Ear Mount SD7B10 Style CXS0060

The OEX air conditioning compressor listed here is a 12V unit in SD7B10 style, with ear mount compressor mounting and a vertical special pad fitting type. It is identified by part number CXS0060 and is supplied as an individual each unit, which makes it suitable when you need to replace a compressor by matching the physical style and mounting details rather than guessing by appearance alone.

Key measured and identification details include a 100mm clutch diameter, 4 groove pulley section, 39.44mm gauge line, and head code PB. The unit is described as a Sanden suit type, and the note specifies O rings to suit ORX058 and ORX059, with SP 10 oil type and 100ml oil capacity.

For buyers working through an A/C repair or replacement, the important checkpoints are the 12V electrical setup, ear mount configuration, vertical special pad fittings, and the CXS0060 part number. These are the most useful identifiers to confirm before ordering, especially where the original compressor has been removed or where the old unit is no longer legible.

This compressor falls under OEX cooling and AC components, and it carries a two year warranty. As with any A/C component, the correct match depends on the application details, mounting style, pulley layout, and service requirements, so comparing the vehicle setup against the listed measurements is the safest way to proceed.

Key Features

• 12V air conditioning compressor
• SD7B10 style compressor
• Ear mount mounting type
• 4 groove pulley section
• 100mm clutch diameter
• Vertical special pad fitting type

Specifications

• Brand: OEX
• Product type: Air conditioning compressor
• Voltage: 12V
• Series: SD7B10
• Compressor mounting: Ear mount
• Fitting type: Vertical special pad
• Pulley section: 4 groove
• Clutch diameter: 100mm

Application and Buying Notes

Before ordering, check the part number CXS0060 against the compressor being replaced, then compare the mounting style, pulley section, and clutch diameter. In this case the important physical identifiers are ear mount, 4 groove pulley, and 100mm clutch diameter, which need to align with the vehicle’s existing setup.

The compressor is listed as a 12V SD7B10 style unit with vertical special pad fittings and a 39.44mm gauge line. Those details matter because A/C compressors can look similar while differing in mounting geometry and hose connection arrangement. Confirming the fitting type is especially important if the old compressor is missing or has been swapped previously.

Because no specific vehicle makes, models, or year ranges are supplied here, the safest buying approach is to compare the application on the vehicle with the listed measurements and identifiers. The supplied two year warranty applies to the part, but it does not replace the need to verify fitment before installation.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number CXS0060 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type AIR CONDITIONING COMPRESSOR, Unit of Measure EACH, Warranty Two Years, Compressor Mounting Ear Mount, Pulley Section 4 Groove, Suits Unit Make Sanden, Note O Rings to suit ORX058 & ORX059 . Oil Type SP 10, Oil Capacity 100ml, Head Code PB, Product Group 1 COOLING.

Additional published details for cross-checking include Part No. CXS0060, Brand OEX, Description OEX Air Conditioning Compressor 12V Ear Mount SD7B10 Style, Clutch Diameter 100mm, Fitting Type Vertical Special Pad, Series SD7B10, Voltage 12, Gauge Line 39.44mm, Dust Cover Y/N No.

OEX Air Conditioning Compressor 12V Ear Mount SD7B10 Style. Part number CXS0060 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Pulley configuration is 4 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number CXS0060, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a air conditioning compressor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Where no verified application list is available, the part number, mounting details, connector style, and published specifications should be used as the primary selection criteria.

Compatibility note: Please confirm compatibility using part number CXS0060, the 12V SD7B10 style, ear mount configuration, 4 groove pulley, 100mm clutch diameter, and vertical special pad fitting details before ordering.

FAQ

What is the part number for this compressor?

The part number is CXS0060. For this listing, part number CXS0060 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.

What voltage is this air conditioning compressor?

It is a 12V compressor. For this listing, part number CXS0060 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.

What mounting style does it use?

It is listed as an ear mount compressor. For this listing, part number CXS0060 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.

What pulley and clutch details are supplied?

The compressor has a 4 groove pulley section and a 100mm clutch diameter. For this listing, part number CXS0060 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.

What oil information is provided?

The note specifies SP 10 oil type and an oil capacity of 100ml. For this listing, part number CXS0060 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.

Does this listing confirm vehicle model fitment?

No vehicle makes, models, or year ranges are supplied here, so fitment should be confirmed using the part number CXS0060 and the listed mounting and fitting details. For this listing, part number CXS0060 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.