OEX Flasher Relay 3 Pin 12V Electronic Magnetic ACX1954BL

The OEX Flasher Relay is a 3 pin, 12V electronic flasher unit with a 126W maximum rating and part number ACX1954BL. It uses 3 blade terminals, is non-polarised, and is listed as a magnetic type flasher for universal applications.

This unit is supplied as each and is intended for auto electrical use where a 12V electronic flasher is required. The stated maximum load is 21–23W per globe, with capacity for up to 6 globes and a total load of 126W max.

As a flasher unit in the OEX range, it sits in the relays and switches category and is identified as a 3 pin 12V item. If you are replacing an existing flasher, matching the terminal count, voltage, and part number is the safest place to start.

Key Features

• 3 pin flasher unit
• 12V electronic type
• 126W maximum load
• 3 blade terminals
• Non-polarised design
• Magnetic type

Specifications

• Brand: OEX
• Part No.: ACX1954BL
• Product type: Flasher unit
• Item type: Flasher
• Voltage: 12V
• Watts: 126W
• Number of terminals: 3
• Terminal style: 3 blade terminals

Application and Buying Notes

Before ordering, check that your vehicle or application uses a 12V, 3 pin electronic flasher unit. This OEX unit is non-polarised and uses 3 blade terminals, so the connector style and terminal count should be matched carefully to the original part you are replacing.

The part number ACX1954BL is the clearest identifier for comparison. If the old relay or flasher carries a different part number, or if the terminal layout does not match 3 blade terminals, confirm the application before fitting.

Load matters with flasher units, especially where lamp count and globe wattage are involved. This unit is rated to 126W max and is specified for up to 6 globes, with a maximum load of 21–23W per globe, so it should be checked against the electrical load of the circuit you are working on.

Universal applications are noted for this flasher, but universal does not mean every setup will suit it. Confirm the voltage, terminal count, load rating, and the style of the existing flasher before purchase, particularly if the vehicle uses an electronic or magnetic type relay arrangement.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number ACX1954BL helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type FLASHER UNIT, Unit of Measure EACH, Warranty One Year, Number of Terminals 3, Flasher Type Electronic, Product Group 2 FUSES BREAKERS RELAYS SWITCHES, Part No. ACX1954BL, Brand OEX, Description OEX Flasher Relay - 3 Pin 12V.

Additional published details for cross-checking include Watts 126, Voltage 12, Item Type Flasher, Product Group 1 AUTO ELEC ACCESSORIES.

OEX Flasher Relay - 3 Pin 12V. Part number ACX1954BL should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number ACX1954BL, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a flasher unit in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Where no verified application list is available, the part number, mounting details, connector style, and published specifications should be used as the primary selection criteria.

In the absence of a verified fitment list, the safest approach is to compare the removed unit directly with the listed product details. That includes checking the housing style, pulley layout, regulator arrangement, and any visible identification numbers before supply is approved.

The listed warranty is One Year. Warranty terms should be considered alongside correct application and part identification, as warranty does not replace fitment confirmation.

Compatibility note: Confirm fitment by comparing the part number ACX1954BL, the 12V rating, the 3 pin/3 blade terminal layout, and the circuit load before buying.

FAQ

What type of unit is this?

It is an OEX flasher unit, listed as a 3 pin 12V electronic flasher. For this listing, part number ACX1954BL is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.

What is the part number?

The part number is ACX1954BL. For this listing, part number ACX1954BL is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.

How many terminals does it have?

It has 3 terminals and uses 3 blade terminals. For this listing, part number ACX1954BL is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.

Is it polarised?

No. It is listed as non-polarised. For this listing, part number ACX1954BL is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.

What is the load rating?

The flasher is rated at 126W max, with a maximum load of 21–23W per globe and suitability for up to 6 globes. For this listing, part number ACX1954BL is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.

Is fitment guaranteed for every 12V vehicle?

No. It is listed for universal applications, but you should still confirm the part number, 12V rating, 3 pin terminal layout, and load requirements against the existing unit. For this listing, part number ACX1954BL is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.